Recent trends in steel fibered high-strength concrete

Steel fibered high-strength concrete (SFHSC) became in the recent decades a very popular material in structural engineering. High strength attracts designers and architects as it allows improving the durability as well as the esthetics of a construction. As a result of increased application of SFHSC, many experimental studies are conducted to investigate its properties and to develop new rules for proper design. One of the trends in SFHSC structures is to provide their ductile behavior that is desired for proper structural response to dynamic loadings. An additional goal is to limit development and propagation of macro-cracks in the body of SFHSC elements. SFHSC is tough and demonstrates high residual strengths after appearance of the first crack. Experimental studies were carried out to select effective fiber contents as well as suitable fiber types, to study most efficient combination of fiber and regular steel bar reinforcement. Proper selection of other materials like silica fume, fly ash and super plasticizer has also high importance because of the influence on the fresh and hardened concrete properties. Combination of normal-strength concrete with SFHSC composite two-layer beams leads to effective and low cost solutions that may be used in new structures as well as well as for retrofitting existing ones. Using modern nondestructive testing techniques like acoustic emission and nonlinear ultrasound allows verification of most design parameters and control of SFHSC properties during casting and after hardening. This paper presents recent experimental results, obtained in the field SFHSC and non-destructive testing. It reviews the experimental data and provisions of existing codes and standards. Possible ways for developing modern design techniques for SFHSC structures are emphasized.     

Studies on mechanical and biodegradability properties of PVA/lignin blend films

The mechanical and biodegradation properties of polyvinyl alcohol/lignin blended films have been studied. The biodegradable composite films were developed by mechanical mixing followed by film casting method using poly (vinyl alcohol) (PVA), with lignin in different compositions. The progress of biodegradation was evidenced by means of the soil burial test. There was also an evaluation of the weight loss of the samples at the end of the biodegradation process. Blending the PVA with lignin improves tensile strength and the modulus of elasticity and causes a slight decrease in the elongation at break. The best tensile mechanical properties of a PVA/lignin blend were at ratio 2:30 where the tensile strength was 38 MPa, elastic modulus 83.22 MPa and elongation at break 213.9%. Blends of various PVA/lignin ratios have shown transparency, flexibility and good mechanical properties. Film composites also showed good biodegradability. The addition of lignin to the PVA matrix increases the degradation rate of the blends. The weight loss is affected by the composition of the blend, and by the nature of the microorganisms in the soil. PVA/lignin film may be potentially suitable as eco-friendly packaging materials.     

Natural occurrence of zearalenone in Tunisian wheat grains

Fusarium mycotoxins are worldwide occurring in cereals and they are frequently reported in fresh or stored grains. Cereals represent a staple food for the Tunisian population; it therefore has a high social, economic and nutritional relevance. Zearalenone (ZEN) is a non-steroidal estrogenic mycotoxin produced by a variety of Fusarium fungi in temperate and warm countries. Fungi-producing ZEN contaminates corn, barley, wheat, sorghum and rice. A total of 205 samples of wheat were collected during the harvest year of 2010 from the major cropping areas in Tunisia and they were analyzed for zearalenone contamination. The aim of this study was to investigate for the first time the presence of ZEN in widely-consumed cereals in Tunisia, especially durum and tender wheat, to compare the levels of contamination by ZEN with the European norms and to suggest some factors that can promote the production of ZEN in Tunisia. To perform this study, we developed and validated in our laboratory conditions an HPLC method for quantitative analysis of ZEN in solid cereal samples. Our results showed that the incidence of ZEN contamination was 75%. The levels of contamination determined in the positive samples ranged between 3 and 560 μg/kg with a mean value of 60 μg/kg. These important amounts of ZEN in wheat can be attributed to the Tunisian climate, warm temperature and prolonged wetness witch are favor to Fusarium growth and mycotoxin production during the cultivation and the final ripening period of wheat grains.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Solar assisted multi-generation system using nanofluids: A comparative analysis

In this comparative study, a parabolic trough solar collector and a parabolic dish solar collector integrated separately with a Rankine cycle and an electrolyzer are analyzed for power as well as hydrogen production. The absorption fluids used in the solar collectors are Al₂O₃ and Fe₂O₃ based nanofluids and molten salts of LiCl–RbCl and NaNO₃–KNO₃. The ambient temperature, inlet temperature, solar irradiance and percentage of nanoparticles are varied to investigate their effects on heat rate and net power produced, the outlet temperature of the solar receiver, overall energy and exergy efficiencies and the rate of hydrogen produced. The results obtained show that the net power produced by the parabolic dish assisted thermal power plant is higher (2.48 kW–8.17 kW) in comparison to parabolic trough (1 kW–6.23 kW). It is observed that both aluminum oxide (Al₂O₃) and ferric oxide (Fe₂O₃) based nanofluids have better overall performance and generate higher net power as compared to the molten salts. An increase in inlet temperature is observed to decrease the hydrogen production rate. The rate of hydrogen production is found to be higher using nanofluids as solar absorbers. The hydrogen production rate for parabolic dish thermal power plant and parabolic trough thermal power plant varies from 0.0098 g/s to 0.0322 g/s and from 0.00395 g/s to 0.02454 g/s, respectively.     

Determination of atmospheric turbidity in Bangladesh

Atmospheric turbidity parameters have been determined following Angstrom's method at three locations in Bangladesh namely, Dhaka city (23.7°N) and two rural locations, Haripur (26.03°N) and Sripur (24.11°N). The parameters were obtained from direct solar radiation data for specific spectral regions and for the whole spectrum as measured using a normal incidence pyrheliometer provided with cut-off glass filters. A considerable variation of Angstrom's turbidity parameters for Dhaka over the year was observed with a maximum value in March. The value for Sripur for the month of March was somewhat lower and the value for Haripur for the month of April was not much different from that of Dhaka. Linke turbidity factor T_L was also determined using the new value of solar constant 1367 W/m² for all three locations.     

The inverse design of the wind turbine blade sections by the singularities method

The aerodynamic characteristics of wind turbines are closely related to the geometry of their blades. The innovation and the technological development of wind turbine blades can be centred on two tendencies. The first is to improve the shape of existing blades; the second is to design new shapes of blades. The aspiration in the two cases is to achieve an optimal circulation and hence enhancing some more ambitious aerodynamic characteristics. This paper presents an inverse design procedure, which can be adapted to both thin and thick wind turbine blade sections aiming to optimise the geometry for a prescribed distribution of bound vortices. A method for simulating the initial contour of the blade section is exposed, which simultaneously satisfy the aerodynamic and geometrical constraints under nominal conditions. A detailed definition of the function characterising the bound vortex distribution is presented. The inviscid velocity field and potential function distributions are obtained by the singularities method. In the design method implemented, these distributions and the circulation of bound vortices on the camber line of the blade profile, are used to rectify its camber in an iterative calculation leading to the final and optimal form of the blade section once convergence is attained. The scheme proposed has been used to design the entire blade of the wind turbine for a given span-wise distribution of bound circulation around the blade contour.     

Automated brain tumor segmentation on multi-modal MR image using SegNet

Computational Visual Media - The potential of improving disease detection and treatment planning comes with accurate and fully automatic algorithms for brain tumor segmentation. Glioma, a type of...