In the Hands of the People: Harnessing the Collective Power of Village Life in India

Top-down attempts by governments and charities to rebuild rural communities after natural disasters, or to rehabilitate slums, can leave communities feeling fractured. The Hunnarshala Foundation instead focuses on re-establishing social capital, providing funding and professional support for residents so that they can work together to improve their lot. This also reinforces the value of traditional artisans' knowledge in solving modern problems. Hunnarshala's Executive Vice Chairman Sandeep Virmani explains.     

Investigation of Subthreshold Characteristics of Negative Capacitance Single-Active Layer Double-Gate (NC-SALDG) Thin-Film Transistor (TFT)

Silicon - In this paper, for the first time, the performance evaluation of negative capacitance single-active layer double-gate (NC-SALDG) TFT is presented. In the proposed NC-SALDG TFT, amorphous...     

Sunflower Acid Oil-Based Production of Rhamnolipid Using Pseudomonas aeruginosa and Its Application in Liquid Detergents

Utilization of industrial waste as substrates for the rhamnolipid synthesis by Pseudomonas aeruginosa is a worthy alternative for conventionally used vegetable oils and fatty acids to reduce the production cost of rhamnolipid. Sunflower acid oil (SAO), a by-product of the oil industry, contains 70% 18:0 fatty acid, with oleic acid as a major component. In this scope, production and analysis of rhamnolipid was successfully demonstrated using SAO as a new substrate. Pseudomonas aeruginosa produced rhamnolipid (a glycolipid biosurfactant) at a maximum concentration of 4.9 g L⁻¹ with 60 g L⁻¹ of SAO in the medium. Structural properties of rhamnolipid biosurfactant are confirmed using thin layer chromatography (TLC), high performance liquid chromatography (HPLC), and fourier transformed infrared spectroscopy (FTIR) analysis. Further surface-active properties of the crude rhamnolipid were evaluated by measuring surface tension and emulsification properties. The synthesized rhamnolipid reduced the surface tension of water to 30.12 mN m⁻¹ and interfacial tension (against heptane) to 0.52 mN m⁻¹. Moreover, rhamnolipid shows the highest emulsification index (above 80%) for vegetable oils. This study confirms the use of SAO as a potential substrate for rhamnolipid production. The synthesized rhamnolipid was incorporated in liquid detergent formulation along with alpha olefin sulfonate (AOS) and sodium lauryl ether sulfate (SLES). The performance properties including foaming and cleaning efficiency of liquid detergent were compared.     

Proximate Composition and Fatty Acid Profile of <Emphasis Type="Italic">Pongamia pinnata</Emphasis>, a Potential Biodiesel Crop

The chemical characteristics of Pongamia pinnata seeds, focussing on proximate composition and the fatty acid profile of its oil, are presented. The proximate composition of P. pinnata seeds was: 3.8% ash, 9.7% sugar, 7.07% protein, 24% oil, 10.7% free amino acids, and 0.24% free fatty acids. The oil was extracted from seeds by use of different solvents and the highest yield (29%) was obtained by use of n-hexane. Monounsaturated and polyunsaturated fatty acids accounted for 63.3 and 22.9%, respectively, of the seed oil. Oleic acid was the major fatty acid but a substantial amount of erucic acid was also detected; this was not reported in previous studies. The level of erucic acid and the presence of toxic flavonoids, for example karanjin, pongapin, and pongaglabrin, render the oil inedible according to WHO recommendations. However, low levels of saturated and polyunsaturated fatty acids with desirable cetane number and iodine value suggest potential for application as a biodiesel fuel.     

Synthesis and characterization of organo‐soluble poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains

Poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains were synthesized by polycondensation of each of the two bisphenol monomers viz, 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane and 1,1‐bis(4‐hydroxyphenyl)‐3‐pentadecyl cyclohexane with activated aromatic dihalides namely, 4,4′‐difluorobenzophenone, and 1,3‐bis(4‐fluorobenzoyl)benzene in a solvent mixture of N,N‐dimethylacetamide and toluene, in the presence of anhydrous potassium carbonate. Polymers were isolated as white fibrous materials with inherent viscosities and number average molecular weights in the range 0.70–1.27 dL g^?1 and 76,620–1,36,720, respectively. Poly(ether ether ketone)s and poly(ether ether ketone ketone)s were found to be soluble at room temperature in organic solvents such as chloroform, dichloromethane, tetrahydrofuran, and pyridine and could be cast into tough, transparent, and flexible films from their solutions in chloroform. Wide angle X‐ray diffraction patterns exhibited a broad halo at around 2θ = ～ 19° indicating that the polymers containing pentadecyl chains were amorphous in nature. In the small‐angle region, diffuse reflections of a typically layered structures resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss, obtained from TG curves, for poly(ether ether ketone)s and poly(ether ether ketone ketone)s were in the range 416–459°C, indicating their good thermal stability. A substantial drop in glass transition temperatures (68–78°C) was observed for poly(ether ether ketone)s and poly(ether ether ketone ketone)s due to “internal plasticization” effect of flexible pendant pentadecyl chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Bio-hydrometallurgical processing of low grade chalcopyrite for the recovery of copper metal

A process flowsheet was developed to recover copper metal from the lean sulfide ore of copper available at Malanjkhand, Hindustan Copper Limited (HCL), India. Copper pregnant leach solution (PLS) obtained from bio-heap leaching of chalcopyrite containing 0.3% copper was purified through solvent extraction (SX) and the copper recovered by electrowinning (EW). The copper-free raffinate obtained from SX stripping unit was returned back to the bioleaching circuit. The purity of the electrolytic copper produced at pilot scale was found to be 99.96%. During electrowinning, the effect of flow rate of electrolyte on current efficiency and energy consumption was also studied.     

Electrospinning pure protein solutions in core–shell fibers

Electrospinning of protein‐loaded fibers faces many challenges, e.g. burst release owing to segregation of the protein on the fiber surface, loss of activity due to electrospinning conditions, limitation of loading capacity etc. Core–shell electrospinning provides an effective way to electrospin fibers wherein the core can be loaded with bioactive molecules in friendly conditions of a compatible polymer solution, thereby protecting the molecules from the electrostatic field and organic solvent of shell solutions. The shell polymer, after the electrospinning, acts as a barrier to control the release of the loaded molecules. However, the limitation of loading capacity still remains due the prerequisite of using an additional polymer as additive to achieve the minimum viscosity of the core solution required for viscous drag by the shell solution being drawn by the electrostatic force. The work reported here aims to alleviate the need of a polymer additive by using aqueous protein solutions of very high concentration. High concentrations of protein solutions were successfully electrospun as the core of the protein–poly(lactide‐co‐glycolic acid) core–shell fibers. A partitioning effect was seen in the controlled release of hydrophilic proteins as they were retained in the aqueous core for longer times. Using lysozyme as a model protein, it was shown that the activity is significantly retained after electrospinning, compared with electrospinning in monolithic fibers. Moreover, the lysozyme activity was also comparable with the lysozyme released from core–shell fibers spun using poly(vinyl acetate) as additive in the core. Copyright © 2012 Society of Chemical Industry     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.