The influence of third-body particles on wear rate in unicondylar knee arthroplasty: a wear simulator study with bone and cement debris

The reduced intraoperative visibility of minimally invasive implanted unicondylar knee arthroplasty makes it difficult to remove bone and cement debris, which have been reported on the surface of damaged and retrieved bearings. Therefore, the aim of this study was to analyze the influence of bone and cement particles on the wear rate of unicompartmental knee prostheses in vitro. Fixed bearing unicompartmental knee prostheses were tested using a knee-wear-simulator according to the ISO standard 14243-1:2002(E) for 5.0 million cycles. Afterwards bone debris (particle size 671 ± 262 μm) were added to the test fluid in a concentration of 5 g/l for 1.5 million cycles, followed by 1.5 million cycles blended with cement debris (particle size 644 ± 186 μm) in the same concentration. Wear rate, knee-kinematics and wear-pattern were analyzed. The wear rate reached 12.5 ± 1.0 mm³/million cycles in the running-in and decreased during the steady state phase to 4.4 ± 0.91 mm³/million cycles. Bone particles resulted in a wear rate of 3.0 ± 1.27 mm³/million cycles with no influence on the wear rate compared to the steady state phase. Cement particles, however, lead to a significantly higher wear rate (25.0 ± 16.93 mm³/million cycles) compared to the steady state phase. The careful removal of extruded cement debris during implantation may help in reducing wear rate. Bone debris are suggested to have less critical influence on the prostheses wear rate.     

Determination of alcohols and volatile organic acids in anaerobic bioreactors for H2 production by near infrared spectroscopy

In recent years, near infrared (NIR) spectroscopy has been investigated as a tool for monitoring anaerobic digesters, but several adversities in its application have been reported. This study proposes the application of NIR for the determination of alcohols and volatile organic acids from H₂ production bioreactors and evaluates different approaches to optimize the prediction models. Partial least squad (PLS) models were developed using samples from anaerobic batch reactors fed with crude glycerol for wastewater treatment. The analytes predicted were: methanol, ethanol, 1-butanol, acetic, propanoic, butyric, isocaproic and total volatile organic acids (VFA). The optimization of the predictive capacity of the models was achieved through the orthogonal signal correction (OSC) preprocessing and the selection of variables performed by the genetic algorithm (GA). The application of the proposed models were based on the following figures of merit: accuracy, precision, linearity, limits of detection and quantitation, measurement interval, sensitivity, selectivity, signal-to-noise ratio and bias. Despite the low selectivity (maximum of 0.12%), the models presented high sensitivity [γ^?1 = 0.19 (mg L^?1)^?1], low LOQ (1 mg L^?1) and correlation between reference and predicted values (r) at least 0.93, except for propanoic acid (r_pred = 0.85). The F-test revealed that the selection of variables by GA significantly improved the accuracy and linearity of the prediction models for methanol, acetic acid, isocaproic acid and VFA. NIR spectroscopy has proved to be a powerful tool for monitoring H₂ production bioreactors since provides fast, low cost and multicomponent information.     

Experimental approaches for the estimation of uncertainty in analysis of trace inorganic contaminants in foodstuffs by ICP-MS

Total Diet Studies to estimate dietary exposure to food contaminants need to evaluate laboratory measurements data variance. In this process it is critical that data from analytical methods are reliable to correctly scrutinize and compare values over time and between countries. In Europe it is widely recognized that the evaluation of measurement uncertainty is an important parameter when assessing the sources of analytical data variability. Two approaches are considered to estimate uncertainty in analytical measurement. Arsenic, Lead, Chromium and Cadmium, content in several food matrix determined by Inductively Coupled Mass Spectrometry (ICP-MS) microwave digestion assisted, are used as examples. The aim of the present research work is to compare both approaches accepted by Eurolab and GUM: Mathematical modeling to assess uncertainty components based on a classical model (bottom up) and an empirical method (top down), based on either experimental data obtained from a single laboratory validation data or inter-laboratory data from Proficiency Testing schemes. Relative expanded uncertainty calculated by both approaches agree when U (%) <20%. These values are concordant with RSD_R reported in collaborative studies of EN 15763 (2009), which were assumed as target uncertainty. The top down approach described is simple and easy to use when compared with the mathematical modeling approach providing considerable benefits to those who assess data produced by several laboratories.     

Recovery and characterisation of coloured phenolic preparations from apple seeds

The aim of this study was to investigate whether complexly constituted phenolic extracts from apple seeds may be utilised for the recovery of natural coloured antioxidant preparations, which might serve as potential food or cosmetic ingredients.In a first step, the recovery of phenolic compounds was optimised by varying crucial extraction parameters. A single extraction step at 25 °C using an acetone–water mixture (60:40, v/v) and a solid-to-solvent ratio of 1:8 (w/v) for 1 h was found to be appropriate to achieve both high phenolic yields and antioxidant activities.In a second step, differently produced apple seed extracts and a phloridzin model solution were enzymatically treated by mushroom polyphenol oxidase to investigate the rate of pigment synthesis. Depending on the extraction procedure applied, synthesis rates, pigment yields and colour properties significantly differed. Compared to the phloridzin model solution, extracts recovered from the seeds showed comparable and even better results, thus indicating such preparations to be a promising alternative to synthetic yellow dyes.     

Mathematical modelling of soybean oil solubility in supercritical carbon dioxide

The solubility of soybean oil in supercritical carbon dioxide has been determined in the pressure range of 100–300 bar and in the temperature range of 313–323 K. The obtained values (from 0.0005 to 0.02055 g L^?1) have been correlated using four different empirical equations proposed correspondingly by Chrastil, del Valle and Aquilera, Adachi and Lu and Sparks et al. Since the Sparks et al. equation provided the lowest average absolute relative deviation (AARD) (10.25%) than other models in the examined experimental range, a modified equation of Sparks et al. model was developed for predicting the solubility of soybean oil in supercritical carbon dioxide as a function of temperature and density. An improved equation showed the lowest deviation (2.15%) between experimental data than the other empirical equations considered in this study. The proposed equation was also applied for correlating the solubility of linoleic acid (AARD was 2.40%).     

Do ‘green’ buildings have better indoor environments? New evidence

A post-occupancy evaluation (POE) of 12 green and 12 conventional office buildings across Canada and the northern United States was conducted. Occupants (N = 2545) completed an online questionnaire related to environmental satisfaction, job satisfaction and organizational commitment, health and well-being, environmental attitudes, and commuting. In each building on-site physical measurements at a sample of workstations (N= 974) were taken, including: thermal conditions, air quality, acoustics, lighting, workstation size, ceiling height, window access and shading, and surface finishes. Green buildings exhibited superior performance compared with similar conventional buildings. Better outcomes included: environmental satisfaction, satisfaction with thermal conditions, satisfaction with the view to the outside, aesthetic appearance, less disturbance from heating, ventilation and air-conditioning (HVAC) noise, workplace image, night-time sleep quality, mood, physical symptoms, and reduced number of airborne particulates. A variety of physical features led to improved occupant outcomes across all buildings, including: conditions associated with speech privacy, lower background noise levels, higher light levels, greater access to windows, conditions associated with thermal comfort, and fewer airborne particulates. Green building rating systems might benefit from further attention in several areas, including: credits related to acoustic performance, a greater focus on reducing airborne particulates, enhanced support for the interdisciplinary design process and development of POE protocols.

Il a été mené une évaluation après occupation (POE) de 12 immeubles de bureaux verts et 12 immeubles de bureaux classiques répartis à travers le Canada et le nord des Etats-Unis. Les occupants (N?=?2545) ont rempli un questionnaire en ligne portant sur la satisfaction environnementale, la satisfaction au travail et l'implication organisationnelle, la santé et le bien-être, les attitudes environnementales, et les trajets réguliers. Dans chaque immeuble, des mesures physiques in situ sur un échantillon de postes de travail (N?=?974) ont été effectuées, comprenant : les conditions thermiques, la qualité de l'air, l'acoustique, l'éclairage, la taille des postes de travail, la hauteur de plafond, l'accès aux fenêtres et leur occultation, et les finitions de surface. Les bâtiments verts ont affiché des performances supérieures par rapport aux bâtiments classiques similaires. De meilleurs résultats ont été obtenus concernant la satisfaction environnementale, la satisfaction à l'égard des conditions thermiques, la satisfaction à l'égard de la vue sur l'extérieur, l'aspect esthétique, la diminution des perturbations liées aux bruits provenant du chauffage, de la ventilation et de la climatisation (CVC), l'image du lieu de travail, la qualité du sommeil nocturne, l'humeur, les symptômes physiques, et la réduction du nombre de particules en suspension dans l'air. Différentes caractéristiques physiques ont conduit à une amélioration des résultats pour les occupants dans tous les immeubles, concernant notamment les conditions liées à la confidentialité des conversations, les niveaux inférieurs de bruit de fond, les niveaux de luminosité plus élevés, l'accès accru aux fenêtres, les conditions associées au confort thermique, et le nombre moindre de particules en suspension dans l'air. Les systèmes de notation des bâtiments verts pourraient bénéficier d'une plus grande attention apportée à plusieurs domaines, s'agissant en particulier des crédits relatifs aux performances acoustiques, d'un accent accru sur la réduction des particules en suspension dans l'air, d'un soutien renforcé en faveur du processus de conception interdisciplinaire et du développement de protocoles POE.

Mots clés: performances des bâtiments, bilan environnemental, bâtiments verts, environnement intérieur, Leadership in Energy and Environmental Design (LEED), satisfaction des occupants, évaluation après occupation     

Collaborating to Compete—The Governance Implications of Stakeholder Agendas at Mount Pulag National Park,the Philippines

Regional planning has long sought to manage places that extend across political boundaries. The international trend to decentralize governance and promote co-management of protected areas is consistent with emerging collaborative spatial planning theory (Healey, 1997, 1999, 2006), which suggests that through dialogue, parties assert multiple cultural perspectives, share knowledge, and forge shared landscape values as the basis of decisions. As a form of collaborative spatial planning, co-management specifies shared resource management power between national government and one or more local or indigenous communities. Both approaches assume decentralized governance systems. Although critics fault collaborative planning for glossing over historical and cultural contexts, and for ignoring power in decision making, few case studies ask why partners participate or how specific decentralized governance institutions affect plan implementation. This paper draws from a study of co-management at Mount Pulag National Park, the Philippines—a shared indigenous cultural landscape that was to be managed by a board representing multiple local, indigenous, and national jurisdictions. Tracing road decisions by two municipal partners, the paper summarizes how and why major stakeholders adopted and then circumvented protective policies by building duplicative road projects across fragile forests. In this context of changing indigenous rights, the same decentralization laws that enabled co-management also rewarded competition and strategic behavior that weakened the collaborative and fragmented the shared landscape. The case demonstrates the need to interrogate, rather than assume the benefits of decentralized governance and to study why stakeholders participate before relying on voluntary collaboration to manage regional landscapes. The initial version of this paper was presented to the 2006 annual meetings of the Association of Collegiate Schools of Planning, Fort Worth, Texas.