A visual study on flame behavior in tone-excited non-premixed jet flames

A visualization study on the effect of forcing amplitude in tone-excited jet diffusion flames has been conducted. Visualization techniques are employed using optical schemes, which are a light scattering photography. Flame stability curve is attained according to Reynolds number and forcing amplitude at a fuel tube resonant frequency. Flame behavior is globally grouped into two from attached flame to blown-out flame according to forcing amplitude; one sticks the tradition flame behavior which has been observed in general jet diffusion flames and the other shows a variety of flame modes such as the flame of a feeble forcing amplitude where traditionally well-organized vortex motion evolves, a fat flame, an elongated flame, and an in-burning flame. Particular attention is focused on an elongation flame, which is associated with a turnabout phenomenon of vortex motion, and on a reversal of the direction of vortex roll-up. It is found that the flame length with forcing amplitude is the direct outcome of the evolution process of the formed inner flow structure. Especially the negative part of the acoustic cycle under the influence of a strong positive pressure gradient causes the shapes of the fuel stem and fuel branch part and even the direction of vortex roll-up to dramatically change.     

Morphology and mechanical properties of liquid crystalline copolyester and poly(ethylene 2,6-naphthalate) blends

Blends of poly(ethylene 2,6-naphthalate) (PEN) and a liquid crystalline copolyester (LCP), poly(benzoate-naphthoate), were prepared in a twin-screw extruder. Specimens for mechanical testing were prepared by injection molding. The morphology and mechanical properties were investigated by scanning electron microscopy (SEM) and an Instron tensile tester. SEM studies revealed that finely dispersed spherical domains of the liquid crystalline polymer (LCP) were formed in the PEN matrix, and the inclusions were deformed into fibrils from the spherical droplets with increasing LCP content. The morphology of the blends was found to be affected by their composition and a distinct skin-core morphology was found to develop in the injection molded samples of these blends. Mechanical properties were improved with increasing LCP content, and synergistic effects have been observed at 70 wt% LCP content whereas the elongation at break was found to be reduced drastically above 10 wt% of LCP content. This is a characteristic typical of chopped-fiber-filled composites. The improvement in mechanical properties is likely due to the reinforcement of the PEN matrix by the fibrous LCP phase as observed by scanning electron microscopy. The tensile and modulus mechanical behavior of the LCP/PEN blends was very similar to those of the polymeric composite, and the tensile strength and flexural modulus of the LCP/PEN 70/30 blend were two times the value of PEN homopolymer and exceeded those of pure LCP, suggesting LCP acts as a reinforcing agent in the blends.     

Finite element modeling of ultra fine particle filtration by a membrane filter

Theoretical work has been carried out to investigate the filtration of ultra fine aerosol particles in a membrane filter. The analysis was done using a finite element method with a Newtonian fluid model for the carrier medium. Both inertial filtration and diffusional filtration were considered. Prior to the main analysis, our numerical scheme was tested with the analytical results for the diffusion of particles in the cylinder and showed good agreement, which confirms the importance of axial diffusion occurring in a short cylinder like a very thin membrane filter. Particle size, porosity, pressure drop, and flow velocity are found to be main variables that determine the filter efficiency. Two important mechanisms of filtration have opposite effects on the efficiency, depending on the variables. Increases in particle size, pressure drop, and flow velocity cause increases in the efficiency for intertial deposition, while decreases in those variables cause increases in the diffusional efficiency. The existence of a minimum value of total filtration efficiency (sum of inertial efficiency and diffusional efficiency) was indicated for intermediate values of the variables. Lower porosity is found to favor inertial deposition more than diffusion. Some other effects of filtration conditions on the total efficiency are also discussed.     

Investigations of Electrical Properties in Silica/Indium Tin Oxide Two-Layer Film for Effective Electromagnetic Shielding

The effect of zinc ions added to silica film on the electrical and structural properties of a silica/indium tin oxide two-layer film which had been prepared by solution coating for electromagnetic shielding of displays was studied. The volume resistivity of the undoped silica/indium tin oxide film was more than 3 times as high as that of the zinc-doped silica/indium tin oxide film. The addition of divalent cations, zinc ions, to the overcoated layer led volume resistivity of the two-layer film to decrease significantly and also caused a long-term increase in stability. The decrease in volume resistivity was due to the addition of zinc ions that changed the interface ionization and helped to enhance the electrical conductivity in the two-layer film.     

Performance and stability of Pt-based ternary alloy catalysts for PEMFC

Carbon-supported Pt-based ternary alloy electrocatalysts were prepared by incipient wetness method in order to elucidate the origin of the enhanced activity of oxygen reduction reaction in PEMFC. To measure the catalytic activity and stability of the cathode alloy catalysts (electrodes containing Pt loading of 0.3 mg/cm², 20 wt.% Pt/C, E-TEK), the I-V polarization curves were obtained. All alloy catalysts showed higher performances than Pt/C. It can be concluded that as platinum formed alloys with transition metals, the electronic state of Pt and the nearest neighbor Pt-Pt distance changes, which significantly influence the electrocatalytic activity for oxygen reduction.Long-term stability test was performed with the Pt₆Co₁Cr₁/C alloy catalyst for 500 h. According to XPS analysis, the lower oxide component with Pt₆Co₁Cr₁/C electrocatalyst provides a large portion of platinum in metallic species in the electrocatalyst and it seems to be mainly responsible for its enhanced activity towards oxygen reduction.     

Pointillist video stylization based on particle tracing

We present an algorithm that stylizes an input video into a painterly animation without user intervention. In particular, we focus on pointillist animation with stable temporal coherence. Temporal coherence is an important problem in non-photorealistic rendering for videos. To realize pointillist animation, the various characters of pointillism should be considered in painting process to maintain temporal coherence. For this, weused the particle video algorithm which is a new approach to long-range motion estimation in video. Based on this method, we introduce a method to control the density of particles considering the features of frames and importance maps. Finally, the propagation methods of stroke to minimize flickering effects of brush strokes are introduced.     

Development and control of a new AUV platform

This paper presents an architecture of a newly developed autonomous underwater vehicle (AUV) platform, named KAUV-1, which is designed as a torpedo with very light weight and small size, suitable for use in marine exploration and monitoring. The KAUV-1 has a unique ducted propeller located at the aft end with yawing actuation acting as a rudder. For depth motion, the KAUV-1 is designed to have a mass shifter mechanism inside to change the vehicle center of gravity and to control its pitch angle and depth motion. The paper also presents an analysis on the equations of motion of the KAUV-1 with mass shifter mechanism and a new depth control strategy for the KAUV-1. The feasibility of the proposed control strategy is validated through simulation and experiment of performance of the vehicle.     

The effects of Ni and Li doping on the performance of lithium manganese oxide material for lithium secondary batteries

Layered Li_0.7[M_1/6Mn_5/6]O₂ (M=Li, Ni) was synthesized using a sol-gel method. P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor was first synthesized by a sol-gel method, and then O2-Li_0.7[M_1/6Mn_5/6]O₂ was prepared by an ion exchange of Li for Na in P2-Na_0.7[M_1/6Mn_5/6]O₂ precursor. From charge/discharge curves, it was seen that Li_0.7[Li_1/6Mn_5/6]O₂ has two plateaus similar to those observed from a spinel structure, but Li_0.7[Ni_1/6Mn_5/6]O₂ holds a single plateau as observed from a typical layered structure. It was considered that Li_0.7[Li_1/6Mn_5/6]O₂ undergoes a phase transformation from layered to spinel structure during the charge/discharge cycle, but Li_0.7[Ni_1/6Mn_5/6]O₂ maintains O2-layered structure after the cycles. Li_0.7[Ni_1/6Mn_5/6]O₂ was higher in discharge capacity and retention rate than Li_0.7[Li_1/6Mn_5/6]O₂.     

Effects of melt‐extension and annealing on row‐nucleated lamellar crystalline structure of HDPE films

The row‐nucleated lamellar crystalline structure of high‐density polyethylene (HDPE) films was prepared by applying elongation stress to HDPE melt during T‐die cast film extrusion and subsequently annealing the extruded films. This unusual crystalline structure was analyzed in terms of lamellar crystalline orientation, long‐period lamellar spacing, crystallite size, and degree of crystallinity. The contribution of melt‐extension represented by draw‐down‐ratio (DDR) to the overall orientation was found to be most noticeable than other processing variables. Meanwhile, the long‐period lamellar spacing, the crystallite size, and the degree of crystallinity were influenced predominantly by the annealing temperature. Finally, the processing (melt extension and annealing temperature) – structure (lamellar crystalline structure) – property (hard elasticity) relationship of HDPE films was investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3326–3333, 2007     

The removal of hydrogen sulfide with manganic sorbent in a high-temperature fluidized-bed reactor

The removal of hydrogen sulfide (H₂S) from simulated gas was carried out in a batch type fluidized-bed reactor using natural manganese ore (NMO), which consists of several metal oxides (MnO_x: 51.85%, FeO_y: 3.86%, CaO: 0.11%). The H₂S breakthrough curves were obtained by changing temperature, gas velocity, initial H₂S concentration, and aspect ratio. Moreover, the effects of the particle size and the particle-mixing fraction on H₂S removal were investigated in a binary system of different particle size. From this study, H₂S removal efficiency increased with increasing temperature but decreased with increasing excess gas velocity. The breakthrough time for H₂S decreased as the gas velocity increased, which leads to reducing gas-solid contacting due to gas bypassing in a fluidized bed reactor. Improvement of H₂S removal efficiency in continuous process can be expected from the results of the binary particle system with different size in a batch experiment. The NMO could be considered as a potential sorbent in H₂S removal.