氢氧化铝粉体表面化学改性的研究

综述了氢氧化铝粉体在应用领域存在的主要问题，解释了氢氧化铝粉体表面化学改性的机理。详细地介绍了国内外氢氧化铝粉体的表面化学改性的方法，主要包括酯化反应法、偶联剂法、表面活性剂吸附法以及聚合物包覆法。经研究表明，氢氧化铝粉体表面化学改性后扩宽了其应用领域，具有良好的前景。     

Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl‐functionalized polystyrene (PS–OH) hybrids

Polymethylphenylsilsesquioxane (PMPSQ–OH) and trimethylsilyl end‐blocked PMPSQ (PMPSQ–EC) were prepared. The thermal decomposition behavior of these polymers was studied by thermogravimetric analysis (TGA) and FT‐Raman spectroscopy. Hydroxyl‐functionalized polystyrene (PS–OH) was also prepared by anionic living polymerization. Thin hybrid films of PMPSQ/PS–OH with various blend ratios were obtained by spin‐coating on freshly cleaned glass. The surface morphology of the hybrid films was investigated by atomic force microscopy (AFM). In 80/20 PMPSQ/PS–OH hybrid film, the PS–OH component produced a very uniformly dispersed phase. This hybrid film contained small domains of PS–OH whose size ranged from 60 to 80 nm. As the content of PS–OH was increased, the domain morphology coarsened and phase inversion took place around 50 wt %. In the phase‐inversed system, the PMPSQ‐rich phase was uniformly distributed in the PS–OH‐rich continuous phase. In addition, temperature‐dependent dielectric properties of PMPSQ/PS–OH hybrids were investigated. Relaxation of the hybrids was observed with an increasing content of the PS–OH component due to the amorphous glass transition behavior of PS–OH. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2801–2812, 2003     

Honey bees mating optimization algorithm for process planning problem

Process planning is a very important function in the modern manufacturing system. It impacts the efficiency of the manufacturing system greatly. The process planning problem has been proved to be a NP-hard problem. The traditional algorithms cannot solve this problem very well. Therefore, due to the intractability and importance of process planning problem, it is very necessary to develop efficiency algorithms which can obtain a good process plan with minimal global machining cost in reasonable time. In this paper, a new method based on honey bees mating optimization (HBMO) algorithm is proposed to optimize the process planning problem. With respect to the characteristics of process planning problem, the solution encoding, crossover operator, local search strategies have been developed. To evaluate the performance of the proposed algorithm, three experiments have been carried out, and the comparisons among HBMO and some other existing algorithms are also presented. The results demonstrate that the HBMO algorithm has achieved satisfactory improvement.     

Thermal behavior and the determination of the polymer-polymer interaction parameter of polycarbonate and a thermotropic liquid crystalline polymer blends

Summary The surface modification of low-density polyethylene(PE) by liquid phase photograft polymerization with acrylic acid(AA), acrylamide(AM) and glycidyl methacrylate(GMA) was described. The grafting of AA and AM was proved and characterized by electron spectroscopy for chemical analysis(ESCA). It was found that fully hydrophilic surface can be obtained in very short irradiation time. With ESCA and attenuated total reflection infrared spectroscopy(ATR-IR), it can be confirmed that bifunctional monomer GMA was grafted onto the PE film surface. Through further reaction with GMA grafted film, heparin and protamine were immobilized onto the grafted film surface.     

Preparation and properties of polyelectrolyte complex sponges composed of hyaluronic acid and chitosan and their biological behaviors

Polyelectrolyte complexes (PECs) composed of chitosan and hyaluronic acid (HA) were prepared in various pH regions and at different weight ratios. At low pHs, there was a strong ionic interaction between NH groups in chitosan and both COO^? and COOH groups in HA due to the deprotonation of HA, whereas weak linkages were formed at high pHs because only the carboxyl groups of HA could interact with NH groups in chitosan. The formation of PECs resulted in a decrease in the crystallinity and thermal stability caused by the interactions between polyions. With variations in the degree of ionization of polyions at various pH conditions, novel PEC sponges were prepared by the freeze drying of PEC solutions. Furthermore, for the evaluation of the wound‐healing effect of PEC sponges with or without an antimicrobial agent (silver sulfadiazine), they were applied to a full‐skin defect of a Wistar rat in vivo. The histology and computerized morphometric analysis of the epidermal healing confirmed the proliferation of fibroblasts in the wound bed and a distinct reduction in infectious agents. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 925–932, 2003     

Characteristics of electrical responsive chitosan/polyallylamine interpenetrating polymer network hydrogel

An interpenetrating polymer network (IPN) hydrogel composed of chitosan and polyallylamine exhibited electric‐sensitive behavior. The chitosan/polyallylamine IPN hydrogel was synthesized by radical polymerization using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The swelling behavior of the IPN was studied by immersion of the gel samples in aqueous NaCl solutions at various concentrations and pHs. The swelling ratio decreased with increasing concentration and pH of electrolyte solution. The stimuli response of the IPN hydrogel in electric fields was also investigated. When a swollen the IPN was placed between a pair of electrodes, the IPN exhibited bending behavior in response to the applied electric field. The IPN also showed stepwise bending behavior depending on the electric stimulus. In addition, thermal properties of the IPN were investigated by differential scanning calorimetry (DSC) and dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2290–2295, 2002     

Mechanical properties and morphology of polymer blends of poly(ethylene terephthalate) and semiflexible thermotropic liquid crystalline polyesters

Two thermotropic liquid crystalline polyesters (TLCPs) with long flexible spacer groups in the main chain were prepared by melt polymerization: one was a homopolymer with only decane groups (LCPHO) and the other was a copolymer with hexane or decane groups (LCPCO) between mesogen units. These polyesters were blended with a matrix polymer of poly(ethylene terephthalate) (PET). Scanning electron microscopy (SEM) revealed the excellent interfacial adhesion between polyester and PET, and the large aspect ratio of polyester microfibrils in the blend fiber made by extruding and drawing the blend through a die. The aspect ratio was estimated by using the modified Halpin-Tsai equation. The fiber with LCPHO showed more extensive fibril formation than that with LCPCO.     

The synergistic effect of boron nitride particle and die on the capillary extrusion processability of mLDPE

The synergistic effects of boron nitride (BN) powder and die on the rheology and processability of metallocene‐catalyzed low density polyethylene (mLDPE) were investigated. The processability in the extrusion process is closely related to the interfacial properties between the polymer melts and the die wall. BN powder was added to mLDPE to reduce the friction coefficient and surface energy. Adding 0.5 wt% BN powder to mLDPE was very effective in improving the processability and the extrudate appearance. To study the effect of die surface property, three different dies were applied in capillary extrusion. One was conventional tungsten carbide (TC) die, and the others were hot‐pressed BN (hpBN) die and hot‐pressed BN composite (hpBNC) die. The applications of these BN dies were quite effective in delaying surface melt fracture (sharkskin) and postponing gross melt fracture to higher shear rate compared to the TC die. These improvements result from the fact that BN dies reduce the wall shear stress significantly and promote slip. The synergistic effect of processability could be obtained when both BN powder and hpBN die were used together.     

An NMR study of acid sites on chlorided alumina catalysts using trimethylphosphine as a probe

The MAS-NMR spectra of adsorbed trimethylphosphine (TMP) were used to determine the concentration of Brønsted and Lewis acid sites on pure and chlorinated-Al₂O₃ samples. Chlorination with CHCl₃,CCl₄ or AlCl₃ promoted the formation of Brønsted acid centers, which are characterized by the protonated adduct of TMP. This adduct has a³¹P chemical shift of ca. –3.8 ppm and a J_P–H scalar coupling of 517 Hz. Additional resonances in the –44 to –54 ppm range are attributed to Lewis acid-base pairs. In some cases a partially resolved J_P–Al coupling is observed, which confirms the assignment. Upon thermal treatment of a chlorinated sample at temperatures > 200°C, the concentration of Brønsted acid centers decreased; the concentration of one type of Lewis acid increased and another remained almost constant. In a parallel set of experiments the initial conversion ofn-hexane at 150°C and the yields of cracking and isomerization products were determined. Comparable functional relationships were observed between the loss of Brønsted acid sites and the decrease in yields of both cracking and isomerization products. These results suggest that Bransted acidity is responsible for the cracking and isomerization ofn-hexane over chlorided aluminas at 150°C.     

一种基于深度卷积网络的鲁棒头部姿态估计方法

针对头部姿态估计方法受特征提取限制导致姿态估计效果不佳的问题,提出使用深度卷积网络自动学习有效特征并进行分类的头部姿态估计方法。首先,利用DCNN非线性映射和自动提取图像结构信息的能力,设计一个深度卷积网络实现对姿态鲁棒特征的提取;然后再将提取的特征用于分类器训练并最终实现头部姿态估计。在Pointing’04和FacePix数据库上的测试结果表明,本文设计的深度卷积网络能有效的进行特征学习,避免了人工设计特征的不足,与现有的基于人工设计特征方法相比,本文方法在两个数据库上达到的预测平均绝对误差分别为4.05〫和2.04〫,充分证实了本文算法的稳定性和可靠性。