Thermal runaway prevention in catalytic packed bed reactor by solid temperature measurement and Control

Magnetic crystallite thermometry has been used to measure the average nickel crystallite temperature in packed bed reactors during ethane hydrogenolysis, an exothermic reaction. The technique is based on the temperature dependence of the magnetic moment of dispersed nickel catalysts. Measurement of the average catalyst temperature is very useful for reactor control because of its shorter time constant compared with exit fluid temperature. Bed temperature control based on the exit fluid temperature, which has often been used as a control variable, is too slow to protect thermal runaway of the bed. The advantage of short time constant by measuring the average catalyst temperature has been incorporated with enhanced feedback control system to control the bed temperature and prevent the thermal runaway of the catalyst bed. An enhanced feedback control structure with supervisory action performed better than the classical proportional-integral control in runaway prevention when the two control schemes were compared with each other on the basis of the trippoint (incipient thermal runaway).     

浅析实践论视角下的马克思主义真理观

从实践论的视角分析马克思主义真理观.通过对真理的属性及其检验标准、真理和价值的关系问题的讨论,阐述了实践在马克思主义真理观中的作用和地位.     

Deformation and failure study of surrounding rocks of dynamic pressure roadways in deep mines

In order to understand the change rules of stress-displacement in surrounding rocks of dynamic pressure roadways in deep mines and to obtain a theoretical basis for analyses of roadway stability and designs of support,we established a coupling equation of adjacent rock strength,mining stress and supporting resistance on the basis of an elastic-plastic theory of mechanics.We obtained an analytical solution for stress and displacement distribution of elastic and plastic regions in surrounding rock of dynamic pressure roadway..Based on this theory,we have analyzed the changes in stress-displacement in elastic and plastic regions of surrounding rocks of dynamic pressure roadways in the Haizi Coal Mine.The results show that:1) radial and tangential stress change violently within the first 4 m from the inner surface of a roadway after excavation;radial stress increases while tangential stress decreases within a range of about 6 m from the inner surface of the roadway as a function of q3;2) radial and tangential stress increase with an increase in the mining pressure coefficient k;the increase in the rate of tangential stress is greater than that of radial stress;3) the radial displacement of the inner surface of roadways decreases with an increase in q3,provided that k remains unchanged.     

Application of structural curvature of coalbed floor on CBM development in the Zaoyuan block of the southern Qinshui Basin

Based on controls of structural style and the position in coalbed methane(CBM)development,we used a method of curvatures to study its relations with CBM development parameters.We calculated structural curvatures of contours of the No.3coal seam floor of the Shanxi Formation in the Zaoyuan block of the Qinshui Basin and analyzed its relations with development parameters of coalbed methane wells.The results show that structural curvature is negatively related to coal reservoir pressure,while positively related to permeability.With an increase in structural curvature,the average production of coalbed methane wells increases at first and then decreases,reaching the highest production at 0.02 m-1 of structural curvature.Therefore,structural curvature can be an important index for potential evaluation of coalbed methane development and provide a basis for siting coalbed methane wells.     

光催化-Fenton工艺处理废纸制浆废水

为有效处理废纸制浆废水,采用氙灯照射下的光催化-Fenton技术,研究不同反应器、曝气、草酸钾、H2O2投加方式和废水质量浓度对光-Fenton工艺去除废水中TOC或吸光度的影响.结果表明,提高光照强度可提高TOC去除率;添加适量的草酸钾可提高处理效果;H2O2分两次投加可取得较好的处理效果,大大减少对催化剂的需求;在处理过程中使废水暴露于空气可提高有机物的脱氯效果,但曝气对处理效果并无益处.对于TOC为185 mg/L左右的废纸制浆废水,在[H2O2]=1000 mg/L、[Fe(Ⅱ)]=100 mg/L、pH=3.0、温度为30℃的条件下,经过30 min处理,废水的TOC可去除63%以上.     

虚拟样机中模型库关联关系的研究

为了解决复杂产品虚拟样机模型库管理方法引起的虚拟样机间模型的可复用性低、共享性低、存储不方便等问题,提出了一种基于虚拟样机中模型库关联关系的管理方法.通过对虚拟样机协同开发过程分析,建立了基于功能级的元模型.通过研究元模型间的约束关系发现了关联关系层,并实现了基于关联关系的模型库管理系统,在一定程度上解决了以上提出的问题.     

Dissipative structures of autocatalytic reactions in tubular flow reactors

Dissipative structures of autocatalytic reactions with initially uniform concentrations are studied in tubular flow reactors. A unique steady state exists in a continuous stirred tank reactor. Linear stability analysis predicts either a stable node, a focus or an unstable saddle-focus. Sustained oscillations around the unstable focus can occur for high values of Damköhler number. In distributed parameter systems, travelling, standing or complex oscillatory waves are detected. For low values of Damköhler number, travelling waves with pseudo-constant patterns are observed. With intermediate values of Damköhler number, single or multiple standing waves are obtained. The temporal behavior indicates also the appearance of retriggering or echo waves. For high values of Damköhler number, both single peak and complex multipeak oscillations are found. In the cell model, both regular oscillations near the inlet and chaotic behavior downstream are observed. In the dispersion model, higher Peclet numbers eliminate the oscillations. The spatial profile shows a train of pulsating waves for the discret model and a single pulsating or solitary wave for the continuous model.     

Allelochemical resistance of bald cypress,Taxodium distichum,heartwood to the subterranean termite,Coptotermes formosanus

The heartwood of bald cypress,Taxodium distichum (L.) Rich., resisted feeding attack by the Formosan subterranean termite,Coptotermes formosanus Shiraki. Hexane-extracted heartwood, however, was consumed at > 12 times the amount of sound heartwood eaten. A bioassay usingT. distichum sapwood as a feeding substrate was employed to assess the antitermitic activity of successive hexane, acetone, and methanol extracts of heartwood shavings and isolates derived from the active hexane extract. Two fractions, eluted from the crude hexane extract by liquid chromatography, significantly reduced termite feeding compared to the parent extract, while a third fraction was less active than the original hexane extract. Each fraction contained one major component. All three components were structurally related diterpenes. The two most active heartwood constituents were identified by GC-MS and NMR as ferruginol and manool, while the third and least active, but most prevalent, compound in heartwood was identified as nezukol. Results of bioassays suggest that these allelochemicals act principally as feeding deterrents with accompanying termite mortality due to starvation.     

乳胶制品生产的工序能力分析及质量控制

本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。     

Effects of silicone oil and polymeric modifiers on the mechanical properties of highly filled LLDPE

The effects of coupling agents, silicone oil, and three types of polymeric modifiers on the mechanical properties of linear low density polyethylene (LLDPE) composites highly filled with aluminium hydroxide [Al(OH)₃] were studied. Polymeric modifiers that contain polar groups, such as silane‐grafted polyethylene (Si‐g‐PE) and acrylic‐acid‐grafted ethylene‐vinyl acetate copolymer (AA‐g‐EVA), improve the mechanical properties dramatically, while nonpolar modifiers improve them to some extent. When Al(OH)₃ was treated using a titanate coupling agent, the silicone oil increased the impact strength and elongation at break of the LLDPE/Al(OH)₃ composites. Introduction of a polymeric modifier containing polar groups destroys the beneficial effects of silicone oil on film mechanical properties, while the introduction of a nonpolar elastomeric polymeric modifier retains the high impact strength and elongation at break. SEM analyses provide the indirect evidence of the encapsulation of silicone oil around the filler. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 121–128, 2002