Human granulocytes contain an opiate alkaloid-selective receptor mediating inhibition of cytokine-induced activation and chemotaxis

Human peripheral blood granulocytes previously were found to contain opioid delta 2-receptors mediating stimulation by opioid peptides of chemotaxis. Studies presented in this work indicate that granulocytes also contain opiate alkaloid-selective, opioid peptide-insensitive receptors mediating inhibition by morphine and other opiates of cytokine-induced activation and chemotaxis. Binding studies with [3H]morphine and [3H]diprenorphine ([3H]DPN) indicated the presence of receptor sites, at considerable density with affinities and selectivity for opiates comparable with those of the mu 3-receptor of human peripheral blood monocytes (macrophages). The influence of the guanosine 5'-triphosphate (GTP) analogue GppNHp on binding indicated that the granulocyte receptor was linked to a G protein. Morphine but not opioid peptides interfered with activation and/or chemotaxis of the granulocytes induced by TNF-alpha, IL-1 alpha, IL-8, and FMLP (chemotactic peptide). These effects of morphine were blocked by the antagonist naloxone. Levorphanol inhibited TNF-alpha-induced activation, and also potentiated the inhibition by morphine. Furthermore, in binding assays, levorphanol enhanced the affinity of the receptor for morphine. Dextrorphan had no effect on activation or chemotaxis, and it also had no effect on binding, indicative of stereoselectivity for the effect of levorphanol. It is concluded that human granulocytes contain opiate alkaloid-selective mu 3-receptors that mediate inhibitory effects of morphine on cellular activation by cytokines.     

The clinical significance of MDR-1 gene expression in the hemopoietic cells of patients with acute leukemias in different phases of the disease

AIM: Analysis of cytostatic therapy effects on expression of gene MDR-1 in hemopoietic cells of patients with acute leukemia (AL) in complete clinicohematological remission (CCHR). MATERIALS AND METHODS: The study included 48 AL patients. 27 of them were untreated, 25 were resistant to or had recurrent AL. 4 patients were followed up. Bone marrow mononuclear fraction was investigated. Expression of MDR-1 gene in the cells was evaluated at hybridization. RESULTS: High expression of MDR-1 gene occurred in leukemic blast cells either upon achievement of CCHR or at least 6 months after its onset. When using schemes of chemotherapy containing two potential inductors of gene MDR-1, expression of this gene was registered significantly more frequently than in using schemes based on one inducing drug (p < 0.05). Frequency of occurrence of enhanced expression of gene MDR-1 in leukemic blasts significantly correlated with frequency of CCHR (p < 0.05). Correlation between occurrence of the gene's expression in normal hemopoietic cells in CCHR and occurrence of early AL recurrences was not found. CONCLUSION: The findings may facilitate design of new AL treatment programs.     

Translation eukaryotic initiation factor 4G recognizes a specific structural element within the internal ribosome entry site of encephalomyocarditis virus RNA

A complex of eukaryotic initiation factors (eIFs) 4A, 4E, and 4G (collectively termed eIF4F) plays a key role in recruiting mRNAs to ribosomes during translation initiation. The site of ribosomal entry onto most mRNAs is determined by interaction of the 5'-terminal cap with eIF4E; eIFs 4A and 4G may facilitate ribosomal entry by modifying mRNA structure near the cap and by interacting with ribosome-associated factors. eIF4G recruits uncapped encephalomyocarditis virus (EMCV) mRNA to ribosomes without the involvement of eIF4E by binding directly to the approximately 450-nucleotide long EMCV internal ribosome entry site (IRES). We have used chemical and enzymatic probing to map the eIF4G binding site to a structural element within the J-K domain of the EMCV IRES that consists of an oligo(A) loop at the junction of three helices. The oligo(A) loop itself is not sufficient to form stable complexes with eIF4G since alteration of its structural context abolished its interaction with eIF4G. Addition of wild type or trans-dominant mutant forms of eIF4A to binary IRES.eIF4G complexes did not further alter the pattern of chemical/enzymatic modification of the IRES.     

Particle swarm optimization algorithm to maximize assembly efficiency

The demands on assembly accuracy require accurate operations both in machining and assembly in order to achieve the high performance of products. Although advanced machining technologies can be used to satisfy most of the demands on precision assembly, the corresponding manufacturing cost will also be increased. Selective assembly provides an effective way for producing high-precision assembly from relatively low-precision components. The accuracy of selective assembly is mainly based on the number of groups and the range of the group (allocated equally on the design tolerance). However, there are often surplus parts in some groups due to the imbalance of mating parts, especially in the cases of undesired dimensional distributions, which makes the methods developed and reported in the literature often not suitable for practice. In this work, a particle swarm optimization (PSO) algorithm is proposed by applying batch selective assembly method to a complex assembly with three mating components (as in ball bearing: an inner race, ball and outer race), to minimize the surplus parts and thereby maximizing the assembly efficiency. Due to the continuous nature of particle swarm optimization algorithm, standard PSO equations cannot be used to generate discrete combination of mating parts. An effective encoding scheme is developed to make the combination of mating parts feasible. The evolution performance of the PSO algorithm with different control parameter values is also analysed.     

Material properties and operating configurations of membrane reactors for propane dehydrogenation

A modeling‐based approach is presented to understand physically realistic and technologically interesting material properties and operating configurations of packed‐bed membrane reactors (PBMRs) for propane dehydrogenation (PDH). PBMRs composed of microporous or mesoporous membranes combined with a PDH catalyst are considered. The influence of reaction and membrane transport parameters, as well as operating parameters such as sweep flow and catalyst placement, are investigated to determine desired “operating windows” for isothermal and nonisothermal operation. Higher Damköhler (Da) and lower Péclet (Pe) numbers are generally helpful, but are much more beneficial with highly H₂‐selective membranes rather than higher‐flux, lower‐selectivity membranes. H₂‐selective membranes show a plateau region of conversion that can be overcome by a large sweep flow or countercurrent operation. The latter shows a complex trade‐off between kinetics and permeation, and is effective only in a limited window. H₂‐selective PBMRs will greatly benefit from the fabrication of thin (～1 µm or less) membranes. © 2014 American Institute of Chemical Engineers AIChE J, 61: 922–935, 2015     

Cure-reaction kinetics of amine-blocked polyisocyanates with alcohol using hot-stage Fourier transform infrared spectroscopy

Cure reaction between a series of N-methylaniline-blocked polyisocyanates, based on 4,4′-methylenebis(phenyl isocyanate), poly(tetrahydrofuran) and several substituted N-methylanilines, and n-decanol has been studied. The solid-state isothermal cure reaction was carried out using hot-stage FTIR spectroscopy, in the temperature range of 125–145°C. The urea carbonyl absorption band of blocked polyisocyanate moiety was used to monitor the conversion of blocked polyisocyanate into polyurethane. Kinetic and thermodynamic parameters were calculated using normalized conversion curves. The overall order of cure reaction, for each of the blocked polyisocyanates was found to be first order. Based on the results of kinetics and reaction conditions used in this study, the elimination-addition (S_N¹) mechanism was suggested for the cure reaction between N-methylaniline-blocked polyisocyanates and n-decanol. The effect of substituents present in the blocking agents on the cure reaction of N-methylaniline-blocked polyisocyanates was investigated and found that the cure reaction of N-methylaniline-blocked polyisocyanates was retarded by electron-donating substituents and facilitated by electron withdrawing substituents. The observed high negative entropy of activation value supports the formation of a four-centered, intramolecularly hydrogen-bonded ring structure during transition state of the cure reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

钢渣桩在湿陷性黄土地基中的应用探讨

通过钢渣桩在湿陷性黄土中的静荷载试验、土压力测试等试验结果的基础上,对钢渣桩复合地基、桩间土和钢渣单桩的p-s曲线以及其各自的承载力和相应的沉降量进行了分析,探讨了附加应力沿深度变化规律;研究了桩间土承载力、桩土应力比和桩土荷载比的变化规律,对钢渣单桩和碎石桩以及钢渣桩复合地基和石灰粉煤灰桩复合地基等的承载力特性进行了对比分析;对单桩施工影响范围和施工时地基隆起量进行了观测。     

Insights into the formation of microporous materials by in situ X-ray scattering techniques

Here we demonstrate the power of in situ scattering techniques in the understanding of formation of nanoporous aluminosilicate and aluminophosphate materials. We utilised a number of X-ray techniques, in particular, in situ energy dispersive X-ray diffraction (EDXRD) and small angle and wide angle X-ray scattering (SAXS/WAXS) techniques for this purpose. The in situ SAXS measurements show the formation of homogeneous precursors in the size of ca. 10 nm, prior to the crystallization of LTA. The crystal size is estimated by fitting the SAXS patterns with an equation for a cubic particle, and it is revealed that the final crystal size of the LTA depends on the synthesis temperature. Whereas, the crystallisation of CoAlPO-5, occurs through the formation of poly-dispersed particles with an average size of the precursor particle of ca. 50 nm. Also shown the effect of temperature and structure directing organic cations on the production of CoAlPO-5 materials.     

Rotational abrasive flow finishing (R-AFF) process and its effects on finished surface topography

The present study focus on abrasive flow finishing (AFF), a process that finishes complex internal and external geometries with the help of viscoelastic abrasive medium, while keeping in mind its low finish and material removal rates (MRR). Researchers have often strived to improve finishing rate and MRR. As an attempt to overcome the said limitations, this paper discusses rotational abrasive flow finishing (R-AFF) process wherein complete tooling is externally rotated and the medium reciprocates with the help of hydraulic actuators. In this study, preliminary experiments are conducted on Al alloy and Al alloy/SiC metal matrix composites (MMCs) at different extrusion pressures, and medium compositions are employed for finding optimum conditions of the same for higher change in roughness (ΔR_a). The same optimum conditions are used to study the effect of workpiece rotational speed on (ΔR_a), material removal (MR), change in workpiece hardness and surface topology. It is noted that as the workpiece rotational speed increases from 2 to 10 RPM, the experimental helix angle decreases from 22° to 9° and the helical path length increases from 67 to 160 mm. Based on these findings the mechanism of material removal of matrix and reinforcement in MMC using R-AFF have been proposed. Here the matrix material is removed by micro-cutting and three methods of material removal mechanisms for reinforcement are also explained. The scientific logic behind finishing mechanism of matrix and reinforcement, cross hatch patterns, helical path directions, micro-scratch (μ-scratch) width and depth variation with size, orientation and support that active abrasive grain obtains from neighboring abrasives is derived from scanning electron microscopy micrographs. Finally this study establishes that R-AFF can produce 44% better ΔR_a and 81.8% more MR compared to the AFF process. Accordingly, R-AFF generates micro cross hatch pattern on the finished surface that can improve lubricant holding capabilities.