Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.
This study reports preparation of glass composition (54.50 wt.%) SiO2, (10.80 wt.%) B2O3, (14.20 wt.%) Na2O, (1.20 wt.%) K2O, (6.00 wt.%) CaO, (4.00 wt.%) Fe2O3 and (9.30 wt.%) TiO2 by melt quenching method using direct microwave heating and conventional resistive heating. Study of dielectric loss factor of the glass as function of temperature illustrated increasing loss factor above 370 ℃, 550 ℃, 650 ℃ and 900 ℃, indicating enhanced microwave absorption by the glass at above these temperatures. Chemical analysis results of both the glasses depicted more volatilization loss of volatile ingredients in conventional heating. The study of chemical durability was performed from leachate analysis describing less leaching of Na2O, K2O and other constituents from glass melted in microwave furnace. Glass transition temperatures (Tg) were found to be 576.3 ℃ and 569.5 ℃ for glass melted in conventional and microwave heating route, respectively. Laboratory experiment of glass melting utilizing microwave energy as an alternate heating source demonstrated 70%-75% electrical power saving. 相似文献
A theoretical study of non-isothermal superimposed flow of two polymer melts in wire coating co-extrusion dies has been carried out. Numerical methods have been employed to solve the coupled momentum- and energy-balance equations. Various combinations of three polymers—namely, high density polyethylene (HDPE), polystyrene (PS) and low density polyethylene (LDPE) have been studied and least squares curve fitted quadratic polynomials have been used for constitutive equations for all three polymers in non-Newtonian high shear rate regions. A multitude of thermal and mechanical boundary conditions can be treated by this algorithm. It was found that temperature and velocity profiles in the die depend significantly on the arrangement of the polymers. Maximum temperature rise has been noted to increase sharply with wire velocity but it can be reduced by increasing the die radius. When the thickness of the outer layer is increased from zero, the shear stress at the wall undergoes a dramatic change (if the viscosities of the polymers are different) at small values of the flow rate ratio and it reaches an asymptotic value at large values of flow rate ratio. It was also found that viscosity ratio at the interface can be reduced by changing the initial temperatures of the liquids. It was observed in some cases that large errors in the calculation of rheological and thermal variables for this problem can be made if temperature rise due to viscous dissipation is not considered. 相似文献
In this paper, we have proposed a novel scheme for the extraction of textual areas of an image using globally matched wavelet filters. A clustering-based technique has been devised for estim ating globally matched wavelet filters using a collection of groundtruth images. We have extended our text extraction scheme for the segmentation of document images into text, background, and picture components (which include graphics and continuous tone images). Multiple, two-class Fisher classifiers have been used for this purpose. We also exploit contextual information by using a Markov random field formulation-based pixel labeling scheme for refinement of the segmentation results. Experimental results have established effectiveness of our approach. 相似文献
Total site integration offers energy conservation opportunities across different individual processes and also to design as well as to optimize the central utility system. In total site integration of the overall process, indirect integration with intermediate fluids or through a central utility system are preferred as it offers greater advantages of flexibility and process control but with reduced energy conservation opportunities. To achieve the maximum possible indirect integration between processes assisted heat transfer, i.e., heat transfer outside the region between process pinch points, plays a significant role. A new concept is proposed in this paper for total site integration by generating a site level grand composite curve (SGCC). Proposed SGCC targets the maximum possible indirect integration as it incorporates assisted heat transfer. In this paper, a methodology is proposed to estimate the cogeneration potential at the total site level, utilizing the concept of multiple utility targeting on the SGCC. The proposed methodology to estimate the cogeneration potential is simple and linear as well as utilizes the rigorous energy balance at each steam header. 相似文献
The temperature–enthalpy (T–H) diagram of a distillation column at practical near-minimum thermodynamic condition (PNMTC) or the column grand composite curve (CGCC) is a useful representation for energy targeting studies and may be generated from a converged simulation of a base-case column design. The calculation procedure for the CGCC involves determination of the net enthalpy deficit at each stage by generating envelopes from either the condenser end (top-down approach) or the reboiler end (bottom-up approach). However, the values calculated by the two approaches differ for stages with feeds because existing procedures for CGCC generation do not consider the enthalpy balances at the feed stages. In fact, the net enthalpy deficits at feed stages calculated by both approaches are erroneous even for the simplest case of binary distillation. A feed stage correction (FSC) that rigorously considers the mass and enthalpy balance equations at feed stages is proposed in this work to resolve the discrepancy. Instead of assuming that the compositions obtained from the converged simulation for a feed stage will remain unchanged at PNMTC, the pinched compositions for the feed are determined by the intersection of the equilibrium curve and the feed q-line. Rather than perform an additional flash calculation to establish the pinched feed compositions, a quadratic approximation is developed here for column targeting purposes by assuming the relative volatility obtained from the simulation to remain constant in the neighborhood of the feed stage. The proposed FSC ensures that the CGCC is identical whether the calculations are performed by the top-down approach or the bottom-up approach. The effect of the FSC on the targets for energy conservation by reflux modification, feed conditioning, and introduction of side reboilers/condensers is discussed. As the energy target for reflux modification is determined by the CGCC pinch which typically occurs at or close to the feed location, the significance of the FSC on the reflux modification target is highlighted through several case studies including a complex column featuring multiple feeds and consequently multiple pinch points. The CGCCs for these case studies are generated by a computer program based on the FSC and a single analytical equation for the calculation of the net enthalpy deficits that allows every stage to have a feed, liquid product, vapor product, and side exchanger. The studies show that the reflux modification targets may be erroneous in many cases, if the FSC is ignored. 相似文献
In the present work the reaction between fly ash and lime in fly ash-lime compacts under water curing and steam curing conditions
was studied thoroughly in relation to the processing conditions. Fly ash from different sources were collected, characterized,
mixed with lime in different ratios and compacted. The compacts were cured with water and steam separately. The reduction
in the free CaO content in these compacts was measured as a function of curing time and curing process. Role of two ionic
additives, FeCl3 and MgCl2, on the reaction between fly ash and lime was also investigated by measuring the free CaO content. Kinetics of these reactions
was studied by determining the reaction order and rate constants with respect to the free CaO content and it was observed
that the curing conditions and additives affected the reaction kinetics significantly. 相似文献