Hybrid crossover operators with multiple descendents for real‐coded genetic algorithms: Combining neighborhood‐based crossover operators

Most real‐coded genetic algorithm research has focused on developing effective crossover operators, and as a result, many different types of crossover operators have been proposed. Some forms of crossover operators are more suitable to tackle certain problems than others, even at the different stages of the genetic process in the same problem. For this reason, techniques that combine multiple crossovers, called hybrid crossover operators, have been suggested as alternative schemes to the common practice of applying only one crossover model to all the elements in the population. On the other hand, there are operators with multiple offsprings, more than two descendants from two parents, which present a better behavior than the operators with only two descendants, and achieve a good balance between exploration and exploitation. © 2009 Wiley Periodicals, Inc.     

Differential evolution solution to the SLAM problem

A new solution to the Simultaneous Localization and Modelling problem is presented in this paper. The algorithm is based on the stochastic search for solutions in the state space to the global localization problem by means of a differential evolution algorithm. This non linear evolutive filter, called Evolutive Localization Filter (ELF), searches stochastically along the state space for the best robot pose estimate. The set of pose solutions (the population) focuses on the most likely areas according to the perception and up to date motion information. The population evolves using the log-likelihood of each candidate pose according to the observation and the motion errors derived from the comparison between observed and predicted data obtained from the probabilistic perception and motion model.The proposed SLAM algorithm operates in two steps: in the first step the ELF filter is used at local level to re-localize the robot based on the robot odometry, the laser scan at a given position and a local map where only a low number of the last scans have been integrated. In the second step, the aligned laser measures and the corrected robot poses are used to detect whether the robot is revisiting a previously crossed area (i.e., a cycle in the robot trajectory exists). Once a cycle is detected, the Evolutive Localization Filter is used again to estimate the accumulated residual drift in the detected loop and then to re-estimate the robot poses in order to integrate the sensor measures in the global map of the environment.The algorithm has been tested in different environments to demonstrate the effectiveness, robustness and computational efficiency of the proposed approach.     

Introducing requirements traceability support in model-driven development of web applications

In this work, we present an approach that introduces requirements traceability capabilities in the context of model-driven development of Web applications. This aspect allows us to define model-to-model transformations that not only provide a software artifact of lower abstraction (as model-to-model transformations usually do) but also to provide feedback about how they are applied. This feedback helps us to validate whether transformations are correctly applied. In particular, we present a model-to-model transformation that allows us to obtain navigational models of the Web engineering method OOWS from a requirements model. This transformation is defined as a set of mappings between these two models that have been implemented by means of graph transformations. The use of graph transformations allows us to develop a tool-supported strategy for applying mappings automatically. In addition, mechanisms for tracing requirements are also included in the definition of graph transformations. These mechanisms allow us to link each conceptual element to the requirements from which it is derived. In particular, we focus on tracing requirements throughout the navigational model, which describe the navigational structure of a Web application. To take advantage of these traceability mechanisms, we have developed a tool that obtains traceability reports after applying transformations. These reports help us to study aspects such as whether requirements are all supported, the impact of changing a requirement, or how requirements are modelled.     

Towards a set of agrosystem-specific cropland mapping methods to address the global cropland diversity

Accurate cropland information is of paramount importance for crop monitoring. This study compares five existing cropland mapping methodologies over five contrasting Joint Experiment for Crop Assessment and Monitoring (JECAM) sites of medium to large average field size using the time series of 7-day 250 m Moderate Resolution Imaging Spectroradiometer (MODIS) mean composites (red and near-infrared channels). Different strategies were devised to assess the accuracy of the classification methods: confusion matrices and derived accuracy indicators with and without equalizing class proportions, assessing the pairwise difference error rates and accounting for the spatial resolution bias. The robustness of the accuracy with respect to a reduction of the quantity of calibration data available was also assessed by a bootstrap approach in which the amount of training data was systematically reduced. Methods reached overall accuracies ranging from 85% to 95%, which demonstrates the ability of 250 m imagery to resolve fields down to 20 ha. Despite significantly different error rates, the site effect was found to persistently dominate the method effect. This was confirmed even after removing the share of the classification due to the spatial resolution of the satellite data (from 10% to 30%). This underlines the effect of other agrosystems characteristics such as cloudiness, crop diversity, and calendar on the ability to perform accurately. All methods have potential for large area cropland mapping as they provided accurate results with 20% of the calibration data, e.g. 2% of the study area in Ukraine. To better address the global cropland diversity, results advocate movement towards a set of cropland classification methods that could be applied regionally according to their respective performance in specific landscapes.     

Scientometric Study of the Progress and Development of e-Government Research During the Period 2000–2012

Many countries have implemented changes in public-sector management models, based on the strategic and intensive use of new information and communication technologies. From a critical standpoint, this paper analyzes and characterizes the contributions made by research in the field of e-government, identifying future areas of interest and potentially valuable methodologies. In addition, it compares research efforts focused on developing countries with those concerning developed economies, in order to identify research gaps and possibilities for improvement in the context of e-government research in developing countries. Diverse scientometric approaches are employed in this analysis of papers published by international journals listed in the SSCI index in the fields of Public Administration and of Information Science & Library Science. Our findings reveal the existence of various research gaps and highlight areas that should be addressed in future research, especially in developing countries. Indeed, the research approach to e-government remains immature, focusing on particular cases or dimensions, while little has been done to produce theories or models to clarify and explain the political processes of e-government. In addition, significant differences are found between the impact of scientific output and patterns of scientific production as regards developing and developed countries.     

Vision-based control for rigid body stabilization

This paper addresses the problem of stabilizing to a desired equilibrium point an eye-in-hand system, which consists of a single camera mounted on a rigid body free to move on . It is assumed that there is a collection of landmarks fixed in the environment and that the image coordinates of those landmarks are provided to the system by an on-board CCD camera. The proposed method addresses not only the problem of stabilization but also that of maintaining feature visibility along the system’s trajectory. The resulting solution consists of a feedback control law based on the current and desired image coordinates and reconstructed attitude and depth ratio information, which guarantees that (i) the desired equilibrium point is an almost global attractor; (ii) a set of necessary conditions for feature visibility holds throughout the system’s trajectories; and (iii) the image of a predefined feature point is kept inside the camera’s field of view.     

Robot arm reaching through neural inversions and reinforcement learning

We present a neural method that computes the inverse kinematics of any kind of robot manipulators, both redundant and non-redundant. Inverse kinematics solutions are obtained through the inversion of a neural network that has been previously trained to approximate the manipulator forward kinematics. The inversion provides difference vectors in the joint space from difference vectors in the workspace. Our differential inverse kinematics (DIV) approach can be viewed as a neural network implementation of the Jacobian transpose method for arm kinematic control that does not require previous knowledge of the arm forward kinematics. Redundancy can be exploited to obtain a special inverse kinematic solution that meets a particular constraint (e.g. joint limit avoidance) by inverting an additional neural network The usefulness of our DIV approach is further illustrated with sensor-based multilink manipulators that learn collision-free reaching motions in unknown environments. For this task, the neural controller has two modules: a reinforcement-based action generator (AG) and a DIV module that computes goal vectors in the joint space. The actions given by the AG are interpreted with regard to those goal vectors.