Surface grafting of polymers onto glass plate: Polymerization of vinyl monomers initiated by initiating groups introduced onto the surface

The surface grafting of polymers onto a glass plate surface was achieved by the polymerization of vinyl monomers initiated by initiating groups introduced onto the surface. Azo groups were introduced onto the glass plate surface by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with isocyanate groups, which were introduced by the treatment with tolylene-2,4-diisocyanate. The radical polymerization of various vinyl monomers was initiated by azo groups introduced onto the glass plate surface and the corresponding polymers were grafted from the surface: The surface grafting of polymers was confirmed by IR spectra, and the contact angle of surface, with water. The contact angle of the glass plate increased by the grafting of hydrophobic polymers, but decreased by the grafting of hydrophilic polymers. The radical postpolymerization was successfully initiated by the pendant peroxycarbonate groups of grafted polymer on the surface to give branched polymer-grafted glass plate. The cationic polymerization of vinyl monomers was also successfully initiated by benzylium perchlorate groups introduced onto the glass plate surface and the corresponding polymers were grafted onto the surface. The contact angle of the glass plate surface obtained from the cationic polymerization of styrene was larger than that obtained from the radical polymerization. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 2165–2172, 1997     

The effects of air pollution and climatic factors on atmospheric corrosion of marble under field exposure

The atmospheric corrosion of marble was evaluated in terms of SO₂ concentration as air pollution and climatic factors such as rainfall, relative humidity, temperature and so on under the field exposure. Marble of calcite type (CaCO₃) was exposed to outdoor atmospheric environment with and without a rain shelter at four test sites in the southern part of Vietnam for 3-month, 1- and 2-year periods from July 2001 to September 2003. The thickness loss of marble was investigated gravimetrically. X-ray diffraction and X-ray fluorescent methods were applied to study corrosion products on marble. The corrosion product of marble was only gypsum (CaSO₄ · 2H₂O) and was washed out by rain under the unsheltered exposure condition. It was found that the most substantial factors influencing the corrosion of marble were rainfall, SO₂ concentration in the air and relative humidity. Based on the results obtained, we estimated the dose-response functions for the atmospheric corrosion of marble in the southern part of Vietnam.     

Revealing microbial community structures in large- and small-scale activated sludge systems by barcoded pyrosequencing of 16S rRNA gene

The diversity of bacterial groups in activated sludge from large- and small-scale wastewater treatment plants was explored by barcoded pyrosequencing of 16S rRNA gene. Activated sludge samples (three small and 17 large scale) were collected from 12 wastewater treatment plants to clarify precise taxonomy and relative abundances. DNA was extracted, and amplified by 4 base barcoded 27f/519r primer set. The 454 Titanium (Roche) pyrosequences were obtained and analyses performed by Quantitative Insight Into Microbial Ecology (QIIME) with around 100,000 reads. Sequence statistics were computed, while constructing a phylogenetic tree and heatmap. Computed results explained total microbial diversity at phylum and class level and resolution was further extended to Operational Taxonomic Unit (OTU) based taxonomic assignment for investigating community distribution based on individual sample. Composition of sequence reads were compared and microbial community structures for large- and small-scale treatment plants were identified as major phyla (Proteobacteria and Bacteroidetes) and classes (Betaproteobacteria and Bacteroidetes). Also, family level breakdowns were explained and differences in family Nitrospiraceae and phylum Actinobacteria found at their species level were also illustrated. Thus, the pyrosequencing method provides high resolution insight into microbial community structures in activated sludge that might have been unnoticed with conventional approaches.     

Degradation of thiometon in ethyl acetate

When performing multiresidue analysis of pesticides, the recovery of thiometon was less than 20% from carrots and eggplants, but about 100% from garlic chives and welsh onions. The recovery of thiometon was found to depend on the lot of ethyl acetate. A 2-year-old lot of ethyl acetate caused degradation of thiometon, but a fresh lot of ethyl acetate did not. Analysis showed that ethyl acetate stored for 2 years contained about 5 microL/mL of acetaldehyde. Thiometon was also degraded by acetone or acetonitrile, when acetaldehyde was added to them, in the same manner as by aged ethyl acetate. The fact that the recovery of thiometon from welsh onions was about 100% indicated that some of the mercaptans in allium vegetables may prevent thiometon degradation. Mercaptans such as L-cysteine and 3-mercaptoproionic acid were confirmed to prevent the degradation of thiometon and disulfoton. These findings show that mercaptans may be useful additives for analyzing thiometon and disulfoton.     

A novel ATP regeneration system using polyphosphate-AMP phosphotransferase and polyphosphate kinase

Polyphosphate-AMP phosphotransferase (PAP) and polyphosphate kinase (PPK) were used for designing a novel ATP regeneration system, named the PAP-PPK ATP regeneration system. PAP is an enzyme that catalyzes the phospho-conversion of AMP to ADP, and PPK catalyzes ATP formation from ADP. Both enzymes use inorganic polyphosphate [poly(P)] as a phosphate donor. In the PAP-PPK ATP regeneration system, ATP was continuously synthesized from AMP by the coupling reaction of PAP and PPK using poly(P). Poly(P) is a cheap material compared to acetyl phosphate, phosphoenol pyruvate and creatine phosphate, which are phosphate donors used for conventional ATP regeneration systems. To achieve efficient synthesis of ATP from AMP, an excessive amount of poly(P) should be added to the reaction solution because both PAP and PPK consume poly(P) as a phosphate donor. Using this ATP generation reaction, we constructed the PAP-PPK ATP regeneration system with acetyl-CoA synthase and succeeded in synthesizing acetyl-CoA from CoA, acetate and AMP. Since too much poly(P) may chelate MG2+ and inhibit enzyme activity, the Mg2+ concentration was optimized to 24 mM in the presence of 30 mM poly(P) in the reaction. In this reaction, ATP was regenerated 39.8 times from AMP, and 99.5% of CoA was converted to acetyl-CoA. In addition, since the PAP-PPK ATP regeneration system can regenerate GTP from GMP, it could also be used as a GTP regeneration system.     

Effects of rice cleaning and cooking process on the residues of flutolanil,fenobucarb, silafluofen and buprofezin in rice

We studied the effect of cleaning and cooking on the residues of flutolanil, fenobucarb, silafluofen and buprofezin in rice. The rice had been sprayed in a paddy field in Wakayama city, with 3 kinds of pesticide application protocols: spraying once at the usual concentration of pesticides, repeated spraying (3 times) with the usual concentration of pesticides and spraying once with 3 times the usual concentration of pesticides. The residue levels of pesticide decreased during the rice cleaning process. Silafluofen, which has a higher log Pow value, remained in the hull of the rice. Fenobucarb, which has a lower log Pow value, penetrated inside the rice. The residue concentration of pesticide in polished rice was higher than that in pre-washed rice processed ready for cooking. During the cooking procedure, the reduction of pesticides in polished rice was higher than that in brown rice.     

Identification of Aloe species by random amplified polymorphic DNA (RAPD) analysis

Juice and integument of leaves of 3 Aloe species, Aloe vera, A. ferox and A. africana, are not allowed to be used as food according to the Pharmaceutical Affairs Law in Japan. On the other hand, whole leaves of A. arborescens can be used as food. The present study was designed to distinguish Aloe species by random amplified polymorphic DNA (RAPD) analysis. DNA was isolated from fresh and dried leaves of the 4 Aloe species. Five out of 32 different 10-mer primers examined were useful for analysis. By comparison of the characteristic bands of PCR products on agarose gel, it was possible to distinguish the 4 species. Thus, the botanical species of Aloe in commercial food products can be identified by RAPD analysis.     

丙烯酸酯防钻绒涂层剂的合成研究

介绍了一种乳液聚合方法,通过种子乳液聚合,选用合适的聚合单体,探讨了引发剂和乳化剂的品种及用量对聚合反应的影响,最终确定了反应工艺条件,合成了一种丙烯酸酯防钻绒涂层剂。