3D Micromolding of Arrayed Waveguide Gratings on Upconversion Luminescent Layers for Flexible Transparent Displays without Mirrors,Electrodes, and Electric Circuits

A new technique for the fabrication of arrayed waveguide gratings on upconversion luminescent layers for flexible transparent displays is reported. Ho³⁺‐ and Yb³⁺‐codoped NaYF₄ nanoparticles are synthesized by hydrothermal techniques. Transparent films consisting of two transparent polymers on the NaYF₄ nanoparticle films exhibit mechanical flexibility and high transparence in visible region. Patterned NaYF₄ nanoparticle films are fabricated by calcination‐free micromolding in capillaries. Arrayed waveguide gratings consisting of the two transparent polymers are formed on the patterned NaYF₄ nanoparticle films by micromolding in capillaries. Green and red luminescence is observed from the upconversion luminescent layers of the NaYF₄ nanoparticle films in the arrayed waveguide gratings under excitation at 980 nm laser light. Arrayed waveguide gratings on the upconversion luminescent layers are fabricated with Er³⁺‐doped NaYF₄ nanoparticles which can convert two photons at 850 and 1500 nm into single photon at 550 nm. These results demonstrate that flexible transparent displays can be fabricated by constructing arrayed waveguide gratings on upconversion luminescent layers, which can operate in nonprojection mode without mirrors, transparent electrodes, and electric circuits.     

On-chip Diamond MEMS Magnetic Sensing through Multifunctionalized Magnetostrictive Thin Film

Electrically integrable, high-sensitivity, and high-reliability magnetic sensors are not yet realized at high temperatures (500 °C). In this study, an integrated on-chip single-crystal diamond (SCD) micro-electromechanical system (MEMS) magnetic transducer is demonstrated by coupling SCD with a large magnetostrictive FeGa film. The FeGa film is multifunctionalized to actuate the resonator, self-sense the external magnetic field, and electrically readout the resonance signal. The on-chip SCD MEMS transducer shows a high sensitivity of 3.2 Hz mT⁻¹ from room temperature to 500 °C and a low noise level of 9.45 nT Hz^−1/2 up to 300 °C. The minimum fluctuation of the resonance frequency is 1.9 × 10⁻⁶ at room temperature and 2.3 × 10⁻⁶ at 300 °C. An SCD MEMS resonator array with parallel electric readout is subsequently achieved, thus providing a basis for the development of magnetic image sensors. The present study facilitates the development of highly integrated on-chip MEMS resonator transducers with high performance and high thermal stability.     

Degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics and behavior analysis of hot-carrier degradation

We propose degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics. Since symmetrical normal and reverse characteristics indicate Joule-heating degradation whereas asymmetrical characteristics indicate hot-carrier degradation, they can be clearly and easily classified. Moreover, degradation occurrence is contrasted between standard and fine TFTs. Finally, behavior of the hot-carrier degradation is analyzed.     

Iron–Nitrogen‐Doped Vertically Aligned Carbon Nanotube Electrocatalyst for the Oxygen Reduction Reaction

A highly active iron–nitrogen‐doped carbon nanotube catalyst for the oxygen reduction reaction (ORR) is produced by employing vertically aligned carbon nanotubes (VA‐CNT) with a high specific surface area and iron(II) phthalocyanine (FePc) molecules. Pyrolyzing the composite easily transforms the adsorbed FePc molecules into a large number of iron coordinated nitrogen functionalized nanographene (Fe–N–C) structures, which serve as ORR active sites on the individual VA‐CNT surfaces. The catalyst exhibits a high ORR activity, with onset and half‐wave potentials of 0.97 and 0.79 V, respectively, versus reversible hydrogen electrode, a high selectivity of above 3.92 electron transfer number, and a high electrochemical durability, with a 17 mV negative shift of E _1/2 after 10 000 cycles in an oxygen‐saturated 0.5 m H₂SO₄ solution. The catalyst demonstrates one of the highest ORR performances in previously reported any‐nanotube‐based catalysts in acid media. The excellent ORR performance can be attributed to the formation of a greater number of catalytically active Fe–N–C centers and their dense immobilization on individual tubes, in addition to more efficient mass transport due to the mesoporous nature of the VA‐CNTs.     

Surface activity of the lipid products hydrolyzed with lipase and phospholipase A-2

We examined thein vitro surface activity, immersional wettability and adhesional wettability shown by aqueous solutions of soy lysophospholipid (SLP)/monoglyceride (MG)/fatty acid (FA), SLP/FA and SLP/MG, and found that many lipid mixtures showed significant surface activity when their MG and FA components consisted of polyunsaturated FA and/or medium chain FA. The more unsaturated the FA, the higher the surface activity. A mixture of SLP/medium chain fatty acid MG (medium chain MG)/medium chain FA showed the highest surface activity, and was comparable to an Aerosol-OT surfactant, the most effective wetting agent. SLP/polyunsaturated FA monoglyceride (polyunsaturated MG)/polyunsaturated FA, SLP/medium chain FA, and SLP/polyunsaturated FA, SLP/medium chain MG, and SLP/polyunsaturated MG also showed a high degree of activity. Wettability decreased rapidly when the amount of saturated, long chain FA moieties increased. It is recognized that the degrees of unsaturation and the chain length of FAs in the lipid mixtures have a decisive influence on surface activities. Higher ratios of MG and FA to SLP gave higher activity; and solubilizers such as bile salts were necessary to dissolve them in water.     

Applicability of DNA barcode for identification of fish species

DNA barcoding is a species identification technique, which uses a very short DNA sequence from a region of approximately 650 base-pairs in the 5'-end of the mitochondrial cytochrome c oxidase subunit I gene as a marker to identify species of mammals and fishes. The applicability of DNA barcoding for identification of fish species consumed in Japan was studied. Among thirty-one fresh or processed fishes were obtained from the market, two samples could not be identified due to lack of data in the Barcode of Life Data (BOLD) database. However, BLAST-search of 16S rRNA genes in the National Center for Biotechnology Information (NCBI) database and the PCR-RFLP method published by the Food and Agricultural Materials Inspection Center (FAMIC) were found to be applicable to identify these 2 fishes. The results show that the DNA barcoding technique is potentially useful as a tool for confirming the proper labeling of fish species in the Japanese market.     

Immunomodulatory effect of mushrooms on cytotoxic activity and cytokine production of intestinal lamina propria leukocytes does not necessarily depend on β-glucan contents

We evaluated the effects of seven mushroom extracts (Grifola frondosa, Pholiota nameko, Panellus serotinus, Hypsizygus marmoreus, Pleurotus cornucopiae, Armillaria mellea, and Flammulina velutipes) on cytotoxic activity and cytokine production of lamina propria leukocytes (LPLs) isolated from rat small (S) and large (L) intestinal mucosa. Boiling water extracts from seven species of mushrooms showed no direct cytotoxicity against the YAC-1 target cells. However, prominent increases of cytotoxicity were observed in S- and L-LPLs co-cultured with P. serotinus extract. Cytokine production (TNFα, IFNγ, IL-12 p70, and IL-4) of S- and L-LPLs was stimulated in response to P. cornucopiae extract. Mushroom extracts contributed to target cell adhesion and/or cytokine production in the effector cells. The promotion of cytotoxic activity in S- and L-LPLs was not necessarily related to β-glucan content of the mushroom.