Degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics and behavior analysis of hot-carrier degradation

We propose degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics. Since symmetrical normal and reverse characteristics indicate Joule-heating degradation whereas asymmetrical characteristics indicate hot-carrier degradation, they can be clearly and easily classified. Moreover, degradation occurrence is contrasted between standard and fine TFTs. Finally, behavior of the hot-carrier degradation is analyzed.     

Effect of Annealing Ambient on the Self-Formation Mechanism of Diffusion Barrier Layers Used in Cu(Ti) Interconnects

Copper (titanium) [Cu(Ti)] films with low titanium (Ti) concentration were found to form thin Ti-rich barrier layers at the film/substrate interfaces after annealing, which is referred to as self-formation of the barrier layers. This Cu(Ti) alloy was one of the best candidates for interconnect materials used in next-generation ultra-large-scale integrated (ULSI) devices that require both very thin barrier layers and low-resistance interconnects. In the present paper, in order to investigate the influences of annealing ambient on resistivity and microstructure of the Cu alloys, the Cu(7.3at.%Ti) films were prepared on the SiO₂ substrates and annealed at 500°C in ultra-high vacuum (UHV) or argon (Ar) with a small amount of impurity oxygen. After annealing the film at 500°C in UHV, the resistivity was not reduced below 16 μΩ-cm. Intermetallic compounds of Cu₄Ti were observed to form in the films and believed to cause the high resistivity. However, after subsequently annealing in Ar, these compounds were found to decompose to form surface TiO _x and interfacial barrier layers, and the resistivity was reduced to 3.0 μΩ-cm. The present experiment suggested that oxygen reactive to titanium during annealing played an important role for both self-formation of the interfacial barrier layers and reduction of the interconnect resistivity.     

Iron–Nitrogen‐Doped Vertically Aligned Carbon Nanotube Electrocatalyst for the Oxygen Reduction Reaction

A highly active iron–nitrogen‐doped carbon nanotube catalyst for the oxygen reduction reaction (ORR) is produced by employing vertically aligned carbon nanotubes (VA‐CNT) with a high specific surface area and iron(II) phthalocyanine (FePc) molecules. Pyrolyzing the composite easily transforms the adsorbed FePc molecules into a large number of iron coordinated nitrogen functionalized nanographene (Fe–N–C) structures, which serve as ORR active sites on the individual VA‐CNT surfaces. The catalyst exhibits a high ORR activity, with onset and half‐wave potentials of 0.97 and 0.79 V, respectively, versus reversible hydrogen electrode, a high selectivity of above 3.92 electron transfer number, and a high electrochemical durability, with a 17 mV negative shift of E _1/2 after 10 000 cycles in an oxygen‐saturated 0.5 m H₂SO₄ solution. The catalyst demonstrates one of the highest ORR performances in previously reported any‐nanotube‐based catalysts in acid media. The excellent ORR performance can be attributed to the formation of a greater number of catalytically active Fe–N–C centers and their dense immobilization on individual tubes, in addition to more efficient mass transport due to the mesoporous nature of the VA‐CNTs.     

Optical frequency domain ranging by a frequency-shifted feedbacklaser

This paper describes the theoretical and experimental study of a new technique for optical frequency domain ranging (OFDR) by a frequency-shifted feedback (FSF) laser. In conventional OFDR, a frequency chirped single-mode laser is used as a light source to convert a distance into a beat frequency, and a tradeoff exists between measurement range and resolution. The FSF laser output consists of periodically generated chirped frequency components whose chirp rate is faster than 100 PHz/s (P=10¹⁵), By use of the FSF laser, the tradeoff is removed and long-distance high-resolution OFDR is realized In the experiment, a distance of 18.5 km was measured with a resolution of 20 mm     

Earth‐Abundant and Durable Nanoporous Catalyst for Exhaust‐Gas Conversion

Precious metals (Pt and Pd) and rare earth elements (Ce in the form of CeO₂) are typical materials for heterogeneous exhaust‐gas catalysts in automotive systems. However, their limited resources and high market‐driven prices are principal issues in realizing the path toward a more sustainable society. In this regard, herein, a nanoporous NiCuMnO catalyst, which is both abundant and durable, is synthesized by one‐step free dealloying. The catalyst thus developed exhibits catalytic activity and durability for NO reduction and CO oxidation. Microstructure characterization indicates a distinct structural feature: catalytically active Cu/CuO regions are tangled with a stable nanoporous NiMnO network after activation. The results obtained by in situ transmission electron microscopy during NO reduction clearly capture the unique reaction‐induced self‐transformation of the nanostructure. This finding can possibly pave the way for the design of new catalysts for the conversion of exhaust gas based on the element strategy.     

Statistics of Rain Attenuation and other Environmental Effects Associated with the BSE Satellite Down-Link at 12 GHz in Japan

Propagation measurements were carried out at 12 GHz on the down-link of the Japan's Medium-scale Broadcasting Satellite for Experimental Purpose (BSE), launched in 1978. Analyses of the measurements have revealed the statistics of rain attenuation and duration of fade at 12 GHz in various parts and climates of Japan, as well as other environmental effects such as degradation of reception quality due to snowfall on receiving antennae, reduction in carrier-to-noise ratio by solar noise interference and diffraction attenuation by obstacles. This paper describes the results which are useful for planning and operation of satellite broadcasting systems.     

Evaluation of the Parallel Conductor Theory for Measuring Human Limb Blood Flow by Electrical Admittance Plethysmography

We devised a compensation technique that measures the admittance change of a limb submerged in an electrolyte solution in a cylinder. Using this technique, we evaluated the accuracy of admittance plethysmography and the validity of the parallel-conductor model on which the theory of blood flow measurement by electrical admittance (or impedance) plethysmography is based. From a theoretical point of view, if a limb is regarded as a parallel-conductor model, the admittance change due to blood pooling following venous occlusion should disappear when the resistivity of the solution is equal to that of the blood.     

Surface activity of the lipid products hydrolyzed with lipase and phospholipase A-2

We examined thein vitro surface activity, immersional wettability and adhesional wettability shown by aqueous solutions of soy lysophospholipid (SLP)/monoglyceride (MG)/fatty acid (FA), SLP/FA and SLP/MG, and found that many lipid mixtures showed significant surface activity when their MG and FA components consisted of polyunsaturated FA and/or medium chain FA. The more unsaturated the FA, the higher the surface activity. A mixture of SLP/medium chain fatty acid MG (medium chain MG)/medium chain FA showed the highest surface activity, and was comparable to an Aerosol-OT surfactant, the most effective wetting agent. SLP/polyunsaturated FA monoglyceride (polyunsaturated MG)/polyunsaturated FA, SLP/medium chain FA, and SLP/polyunsaturated FA, SLP/medium chain MG, and SLP/polyunsaturated MG also showed a high degree of activity. Wettability decreased rapidly when the amount of saturated, long chain FA moieties increased. It is recognized that the degrees of unsaturation and the chain length of FAs in the lipid mixtures have a decisive influence on surface activities. Higher ratios of MG and FA to SLP gave higher activity; and solubilizers such as bile salts were necessary to dissolve them in water.