Application of focused ion beam techniques and transmission electron microscopy to thin-film transistor failure analysis

The locations of process-induced defects in hydrogenated amorphous silicon thin-film transistors (a-Si:H TFTs), which are used as elements of active-matrix liquid crystal displays, were investigated by combining focused ion beam techniques with cross-sectional transmission electron microscopy (X-TEM). The FIB technique is applied to TFT failure analysis problems, which require considerable localised etching without inducing mechanical stress or damage at fragile failure locations. We demonstrate the manner in which these techniques are used to characterise TFT defects such as pinholes and portions of the multilayer damaged by mechanical stress. A dramatic improvement brought about by the FIB technique is the increase in temporal efficiency of sample preparations. X-TEM observations also lead to identification of the fault and analysis of its cause, which in turn lead to a marked yield improvement.     

Multichannel fiber ferrule for a stable laser-diode array module

We developed a multichannel fiber ferrule for a stable laser-diode array module. To apply YAG laser welding to parallel butt couple between the laser-diode and the single-mode fiber arrays, hermetically sealed and precisely aligned equi-interval fibers are required. We describe a V-grooved ceramic ferrule for embedding fibers. Fibers are fixed by soldering, using a flat ceramic lid and aligned with a 250 μm pitch. Our ferrule allowed a metallic, stem mounting laser-diode, to be fixed by YAG laser welding. All 30 samples tested have a leak rate of less than 1×10^-10 atm·cc/s. Optical coupling of fabricated modules was 9.7±0.2 dB and coupling loss change from 25°C to 115°C was within 0.5 dB     

Thermoelectric Generation Using Water Lenses

A solar light concentrator composed of water and plastic transparent film has been designed. This flexible lens design can trace the solar movement through control of the tensile stress and amount of water, and concentrate the solar energy onto the thermoelectric (TE) module surface. An experimental water lens was constructed, and the concentrated intensity was monitored by a photodiode as a function of x–z position; For example, when 3.0 kg water was filled and tension of 69.0 N/m was applied to the transparent vinyl sheet, the concentration ratio was evaluated as the maximum of 28.0 at a depth of 657 mm from the water lens bottom surface. TE generation was tested to show the validity of the water lens. The surface condition of the receiver was found to be critical.     

Approaching Trap-Minimized Polymer Thin-Film Transistors

Semiconducting π-conjugated polymers are the most promising candidates for flexible electronics owing to their facile processability and mechanical robustness; however, achieving steep and stable switching operations in polymer thin-film transistors (TFTs) remains a serious challenge. Herein, it is shown that whole optimizations for eliminating interfacial carrier traps throughout the conductive path are necessary in achieving TFTs showing both exceptionally sharp switching and bias-stress-free characteristics. Inverted-coplanar-type TFTs composed of a highly lyophobic amorphous perfluoropolymer gate–dielectric interfaced with a push-coated semiconducting polymer layer are manufactured. The use of the dielectric allows the establishment of bias-stress-free characteristics with minimized contact resistance. Additionally, fairly sharp on/off switching TFTs with the smallest normalized subthreshold swing can be obtained by utilizing a particular donor–acceptor copolymer that involves a self-passivation mechanism working to achieve a trap-minimized interface. These findings have opened a way for low-power and robust device operations in polymer-based flexible electronics.     

Engineering of Lipid Nanoparticles by the Multifunctionalization of the Surface with Amino Acid Derivatives for the Neutralization of a Target Toxic Peptide

Protein affinity reagents (e.g., antibodies) are often used for basic research, diagnostics, separations, and disease therapy. Although a lot of “synthetic” protein affinity reagents have been developed as a cost-effective alternative to antibodies, their low biocompatibility is a considerable problem for clinical application. Lipid nanoparticles (LNP) represent a highly biocompatible drug delivery agent. However, little has been reported that LNP itself works as a protein affinity reagent in living animals. Here, LNP is engineered for binding to and neutralizing a target toxic peptide in living animals by multifunctionalization with amino acid derivatives. Multifunctionalized LNP (MF-LNP) is prepared using amino acid derivative-conjugated lipids. Optimized MF-LNP exhibits nanomolar affinity to the target toxic peptide and inhibits toxic peptide-dependent hemolysis and cytotoxicity. In addition, MF-LNP captures and neutralizes the toxic peptide after intravenous injection in the bloodstream; in addition, MF-LNP does not release the toxic peptide in the accumulated organ. These results reveal the potential of using LNP as a highly biocompatible protein affinity reagent such as an antidote.     

Effects of uni-axial mechanical stress on IGBT characteristics

This paper describes the impacts of mechanical stress on vertical power devices. The stress dependence of the DC characteristics of trench insulated gate bipolar transistors (IGBTs) was measured. The experimental results could be reproduced by the device simulation, which included stress dependence models of the carrier mobility and the band gap. We found that the stress dependence of the on-state voltage mainly arose from the MOSFET portion of the IGBT. Using the device simulation, we estimated the effects of mechanical stress on the surge voltage and the saturation current, which give us the important information for designing a power module with higher ruggedness.     

A Study of Shadowing on Indoor Visible-Light Wireless Communication Utilizing Plural White LED Lightings

White LED is considered as a strong candidate for the future lighting technology. We have proposed an optical wireless communication system that employs white LEDs for indoor wireless networks. In this system, LED is used not only as a lighting device, but also as a communication device. The transmitter has large optical power and large emission characteristics to function as lighting device. And the system has specific wireless channel impulse response differing from infrared wireless communication. In this paper, we discuss about shadowing effect on the system utilizing plural LED lightings including the performance of ISI based on the impulse response. We consider the downlink transmission based on TDMA and evaluate the shadowing effect caused by pedestrians with computer simulation. When the shadowing often occurs at 800 Mb/s, the performance of outage call duration rate and blocking rate are improved by using 3 LED lightings compared with 1 or 2 LED lightings. And, we show that the system with the optimal number of the LED lighting is robust against shadowing and can accommodate more calls. Toshihiko Komine was born in Shizuoka, Japan, on November 17, 1978. He received the B.E. and M.E. degrees in Information and Computer Science from Keio University, Yokohama, Japan, in 2001 and 2003 respectively. He is currently studying for the Ph.D. degree at Department of Information and Computer Science, Keio University. His current research interests are optical wireless communications and LED communications. Shinichiro Haruyama is a professor at Department of Information and Computer Science, Faculty of Science and Technology, Keio University, Yokohama, Japan. He received an M.S. in engineering science from University of California at Berkeley in 1983 and a Ph.D. in computer science from the University of Texas at Austin in 1990. He worked for Bell Laboratories of AT{&}T and Lucent Technologies, U.S.A from 1991 to 1996, and for Sony Computer Science Laboratories, Inc. from 1998 to 2002. His research interests include reconfigurable system, system design automation, wireless communication, and visible light communication. Masao Nakagawa was born in Tokyo, Japan in 1946. He received the B.E., M.E. and Ph.D. degrees in electrical engineering from Keio University, Yokohama, Japan, in 1969, 1971 and 1974 respectively. Since 1973, he has been with the Department of Electrical Engineering, Keio University, where he is now a Professor. His research interests are in CDMA, consumer Communications, Mobile communications, ITS (Intelligent Transport Systems), Wireless Home Networks, and Visible light Communication. He received 1989 IEEE Consumer Electronics Society Paper Award, 1999-Fall Best Paper Award in IEEE VTC, IEICE Achievement Award in 2000, IEICE Fellow Award in 2001. He was the executive committee chairman on International Symposium on Spread Spectrum Techniques and Applications in 1992 and the technical program committee chairman of ISITA (International Symposium on Spread Spectrum Techniques and Applications) in 1994. He is an editor of Wireless Personal Communications and was a guest editor of the special issues on “CDMA Networks I, II, III and IV” published in IEEE JSAC in 1994 (I and II) and 1996 (III and IV). He chairs the Wireless Home Link sub-committee in MMAC (Multimedia Mobile Access Communication Promotion Committee).     

An optimal inspection policy for a storage system with high reliability

A system such as missiles and spare parts of aircrafts has to perform a normal operation at any time when it is used. However, a system is in storage for a long time from the transportation to the usage and its reliability goes down with time. Such a system should be inspected and maintained at periodic times to hold a higher reliability than a prespecified value q. This paper suggests a periodic inspection of a storage system with two kinds of units where unit 1 is inspected and maintained at each inspection, however, unit 2 is not done. The system is replaced at detection of failure or at time when the reliability is below q. The total expected cost until replacement is derived and an optimal inspection time which minimizes it is discussed. Numerical examples are given when failure time distributions are exponential and Weibull ones.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.