The correlation of the vasopressin- and oxytocin-producing activities of different nuclei in the hypothalamo-hypophyseal neurosecretory system]

Radioiodine long has proven to be a safe and effective treatment for thyroid disease. Nonetheless, persisting concerns regarding radiogenic stochastic risks (e.g., carcinogenesis) to patients, their families, and the general public have led regulators to establish criteria for release of 131I-containing patients from medical confinement, with limits ranging from as low as 2 mCi in some parts of Europe to as high as 30 mCi in the United States. To optimize clinical efficacy and cost-effectiveness of 131I therapy, such regulations should be based on logical dosimetric considerations. The thyroidal absorbed dose, proportional to maximum uptake and effective half-life and inversely proportional to mass, is typically approximately 1,500 rad/mCi of 131I administered to a euthyroid adult (based on a thyroid maximum uptake of 25%, effective half-life equivalent to the physical half-life of 131I (8.04 days), and mass of 20 g). As thyroid uptake increases from 0% to 100%, extrathyroidal absorbed doses range from a minimum of 0.15 to 0.5 rad/mCi for breast and gonads to a maximum of 1.5 to 2 rad/mCi for stomach and salivary glands; the absorbed doses of the urinary bladder wall, in contrast, decrease with increasing thyroid uptake, from 2 to 0.6 rad/mCi. In hyperthyroid patients (approximately 15%) with a small iodine pool (so-called small patients), the short effective half-life of radioiodine in the thyroid and high serum concentrations of long-lived protein-bound 131I result in a standard 7,000-rad absorbed dose for treatment of Graves' disease requiring an administered activity of 28 mCi of 131I and yielding a prohibitively high blood absorbed dose of 150 rad. Importantly, once the fetal thyroid begins to function and accumulate radioiodine at a gestational age of 10-12 weeks, fetal thyroid absorbed doses as large as 5,000 rad/mCi of 131I administered to the mother can result. Thus, pregnancy is an absolute contraindication to administration of 131I because of the risk of radiogenic cretinism. Based on actual measurements of thyroid activity and of external absorbed dose, the total thyroid and mean extrathyroidal absorbed doses to adult family members from immediately released 131I-treated patients are approximately 0.01 and approximately 0.02 rad/mCi administered, respectively, yielding an effective dose of approximately 0.02 rem/mCi. A maximum permissible effective dose of 0.5 rem for adults therefore is consistent with a release criterion of 30 mCi of retained 131I. Lower-activity release criteria therefore may be unnecessarily restrictive.     

Olfactory recognition of nonhosts aspen and birch by conifer bark beetlesTomicus piniperda andHylurgops palliatus

The field response ofTomicus piniperda (L.) andHylurgops palliatus (Gyll.) (Coleoptera: Scolytidae) to the attractant ethanol in combination with volatile wood constituents released from the nonhost tree speciesPopulus tremula L. (Salicaceae) andBetula pendula Roth (Betulaceae) was studied using flight barrier traps. The attraction of both species decreased when aspen or birch wood was added to the ethanol bait. The same was true forRhizophagus depressus (F.) (Coleoptera: Rhizophagidae), a predatory species associated with conifer bark beetles.Glischrochilus quadripunctatus (L-),Epuraea bickhardti St.-Claire Deville,E. unicolor (Oliv.) (Coleoptera: Nitidulidae), andRhizophagus parvutus (Payk.) (Coleoptera: Rhizophagidae) were caught in higher numbers in traps baited with both ethanol and wood of aspen or birch than in traps baited with ethanol alone. In a separate experiment, landings ofT. piniperda andH. palliatus on nonhosts (black plastic tubes) were demonstrated with sticky traps.     

Stereoselective Formation of 1,4‐Anhydro‐2‐C‐carboxytetritols in the Degradation of 1,5‐Anhydroribitol and 1,5‐Anhydroxylitol with Oxygen in Aqueous Alkali

Abstract

In addition to other acid products, degradation of 1,5‐anhydroribitol (5) and 1,5‐anhydroxylitol (6) with oxygen in 1.25 M NaOH produced diastereomeric 1,4‐anhydro‐2‐C‐carboxy‐D‐erythritol (7) and 1,4‐anhydro‐2‐C‐carboxy‐D‐threitol (8) and their enantiomers as major products. However, the ratio of the diastereomers differed for the two reactants. Thus, their formation could not proceed solely by benzilic acid‐type rearrangements through α‐dicarbonyl intermediates as typically proposed for formation of alkyl C‐carboxyfuranosides from alkyl glycopyranosides in similar reactions. The α‐dicarbonyl species that can form from 5 and 6 are identical. Potential mechanisms to account for stereoselective formation of 7 and 8 are presented.     

Efficiency of 4,4′‐bis(N,N‐diethylamino) benzophenone for the polymerization of dimethacrylate resins in thick sections

The efficiency of 4,4′‐bis(N,N‐diethylamino)benzophenone (DEABP) for the polymerization of dimethacrylate monomers in thick sections ( 1 – 2 mm) was studied. DEABP (λ_max = 365 nm) represents a complete initiating system as it contains both ketone and amine functional groups. During irradiation, DEABP photobleaches at a fast rate causing deeper penetration of light through the underlying layers, but the photoinitiation efficiency (rate of polymerization per photon absorption rate) is relatively poor. As a result, irradiation of methacrylate monomers at 365 nm results in a slow average polymerization rate and a reduced monomer conversion for thick sections due to the light attenuation caused by the high absorptivity of DEABP and photolysis products. These results highlight the inherent interlinking of light attenuation and photobleaching rate in polymerization of thick sections. Copyright © 2011 Society of Chemical Industry     

Effect of a coalescing aid on the earliest stages of polymer diffusion in poly(butyl acrylate-co-methyl methacrylate) latex films

In this article we use fluorescence resonance energy transfer (FRET) to investigate how a classic coalescing aid, such as 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (Texanol?) (TX), acts on the earliest stages of polymer diffusion as the latex film is still drying. In our approach, we temporarily arrest the drying process of a partially wet latex film by sealing it in an airtight chamber previously cooled to near the latex T_g. At these conditions, we are able to effectively stop the drying process and the polymer diffusion. FRET measurements at various locations on such a sample provide us information about the mechanism operating at the initial stages of polymer diffusion as the latex film is still drying. We complete our study with FRET measurements carried out at longer aging times on predried latex films. We analyze our diffusion data in terms of free volume theory and propose a mechanism that can account for the results obtained.     

N-methyl-2-hydroxyethylammonium oleate ionic liquid performance as corrosion inhibitor for mild steel in hydrochloric acid medium

The aim of the present study is to evaluate the performance of N-methyl-2-hydroxyethylammonium oleate ([m-2HEA][Ol]) as a corrosion inhibitor for mild steel in a 0.1-mol/L hydrochloric acid solution and also investigate the role of chloride in the inhibition mechanism. This protic ionic liquid (PIL) has formerly shown a high efficiency as a corrosion inhibitor in a neutral chloride medium. Electrochemical and weight loss measurements, surface contact angle determination, scanning electron microscopy, and Raman spectroscopy were used to understand the factors that influence the response of the studied inhibitor. Results revealed that [m-2HEA][Ol] behaves as a mixed-type adsorption inhibitor, by blocking cathodic sites and by modifying the activation energy of the anodic reaction, and it can reach up to 94–97% of inhibition efficiency. PIL adsorption was enhanced by the excess of positive charge of the mild steel. The effect of inhibitor molecule has been discussed to propose a mechanism that explains the inhibitory action of the corrosion inhibitor, pointing out the role of chloride in the inhibition mechanism.     

连续相黏度对膜乳化结果的影响

Oil-in-water(o/w) emulsions were produced with a membrane emulsification system. The effect of the continuous phase viscosity on the emulsification was studied. The theoretical analyses show that the continuous phase viscosity influences not only the flow field of the continuous phase but also the interfacial tension. The droplet size distribution and disperse phase flux for different continuous phase viscosity were investigated experimentally at constant wall shear stress and constant volume flow rate of the continuous phase respectively.     

Liver and intestinal fatty acid-binding protein expression increases phospholipid content and alters phospholipid fatty acid composition in L-cell fibroblasts

Although fatty acid-binding proteins (FABP) differentially affect fatty acid uptake, nothing is known regarding their role(s) in determining cellular phospholipid levels and phospholipid fatty acid composition. The effects of liver (L)- and intestinal (I)-FABP expression on these parameters were determined using stably transfected L-cells. Expression of L- and I-FABP increased cellular total phospholipid mass (nmol/mg protein) 1.7- and 1.3-fold relative to controls, respectively. L-FABP expression increased the masses of choline glycerophospholipids (ChoGpl) 1.5-fold, phosphatidylserine (PtdSer) 5.6-fold, ethanolamine glycerophospholipids 1.4-fold, sphingomyelin 1.7-fold, and phosphatidylinositol 2.6-fold. In contrast, I-FABP expression only increased the masses of ChoGpl and PtdSer, 1.2- and 3.1-fold, respectively. Surprisingly, both L- and I-FABP expression increased ethanolamine plasmalogen mass 1.6- and 1.1-fold, respectively, while choline plasmalogen mass was increased 2.3- and 1.7-fold, respectively. The increase in phospholipid levels resulted in dramatic 48 and 33% decreases in the cholesterol-to-phospholipid ratio in L- and I-FABP expressing cells, respectively. L-FABP expression generally increased polyunsaturated fatty acids, primarily by increasing 20∶4n−6 and 22∶6n−3, while decreasing 18∶1n−9 and 16∶1n−7. I-FABP expression generally increased only 20∶4n−6 proportions. Hence, expression of both I- and L-FABP differentially affected phospholipid mass, class composition, and acyl chain composition. Although both proteins enhanced phospholipid synthesis, the effect of L-FABP was much greater, consistent with previous work suggesting that these two FABP differentially affect lipid metabolism.     

Fluorescence Techniques Using Dehydroergosterol to Study Cholesterol Trafficking

Cholesterol itself has very few structural/chemical features suitable for real-time imaging in living cells. Thus, the advent of dehydroergosterol [ergosta-5,7,9(11),22-tetraen-3β-ol, DHE] the fluorescent sterol most structurally and functionally similar to cholesterol to date, has proven to be a major asset for real-time probing/elucidating the sterol environment and intracellular sterol trafficking in living organisms. DHE is a naturally occurring, fluorescent sterol analog that faithfully mimics many of the properties of cholesterol. Because these properties are very sensitive to sterol structure and degradation, such studies require the use of extremely pure (>98%) quantities of fluorescent sterol. DHE is readily bound by cholesterol-binding proteins, is incorporated into lipoproteins (from the diet of animals or by exchange in vitro), and for real-time imaging studies is easily incorporated into cultured cells where it co-distributes with endogenous sterol. Incorporation from an ethanolic stock solution to cell culture media is effective, but this process forms an aqueous dispersion of DHE crystals which can result in endocytic cellular uptake and distribution into lysosomes which is problematic in imaging DHE at the plasma membrane of living cells. In contrast, monomeric DHE can be incorporated from unilamellar vesicles by exchange/fusion with the plasma membrane or from DHE-methyl-β-cyclodextrin (DHE-MβCD) complexes by exchange with the plasma membrane. Both of the latter techniques can deliver large quantities of monomeric DHE with significant distribution into the plasma membrane. The properties and behavior of DHE in protein-binding, lipoproteins, model membranes, biological membranes, lipid rafts/caveolae, and real-time imaging in living cells indicate that this naturally occurring fluorescent sterol is a useful mimic for probing the properties of cholesterol in these systems.     

High Dietary Fat Exacerbates Weight Gain and Obesity in Female Liver Fatty Acid Binding Protein Gene-Ablated Mice

Since liver fatty acid binding protein (L-FABP) facilitates uptake/oxidation of long-chain fatty acids in cultured transfected cells and primary hepatocytes, loss of L-FABP was expected to exacerbate weight gain and/or obesity in response to high dietary fat. Male and female wild-type (WT) and L-FABP gene-ablated mice, pair-fed a defined isocaloric control or high fat diet for 12 weeks, consumed equal amounts of food by weight and kcal. Male WT mice gained weight faster than their female WT counterparts regardless of diet. L-FABP gene ablation enhanced weight gain more in female than male mice—an effect exacerbated by high fat diet. Dual emission X-ray absorptiometry revealed high-fat fed male and female WT mice gained mostly fat tissue mass (FTM). L-FABP gene ablation increased FTM in female, but not male, mice—an effect also exacerbated by high fat diet. Concomitantly, L-FABP gene ablation decreased serum β-hydroxybutyrate in male and female mice fed the control diet and, even more so, on the high-fat diet. Thus, L-FABP gene ablation decreased fat oxidation and sensitized all mice to weight gain as whole body FTM and LTM—with the most gain observed in FTM of control vs high-fat fed female L-FABP null mice. Taken together, these results indicate loss of L-FABP exacerbates weight gain and/or obesity in response to high dietary fat.