Surface alterations of the bovine oocyte and its investments during and after maturation and fertilization in vitro

Surface characteristics of the bovine oocyte and its investments before, during, and after maturation, and fertilization in vitro were evaluated by scanning electron microscopy (SEM). Oocyte diameters were also measured during SEM analysis of the oocyte. The cumulus cells manifested a compact structure with minimal intercellular spaces among them in the immature oocytes. These became fully expanded with increased intercellular spaces after maturation in vitro, but contracted again after fertilization. The zona pellucida (ZP) showed a fibrous, open mesh-like structure in the maturing and matured oocytes. The size and number of meshes on the ZP decreased dramatically after fertilization. The vitelline surface of immature oocytes was characterized by distribution of tongue-shaped protrusions (TSPs) varying in density. After 10 and 22 hr of maturation incubation, oocyte surface microvilli (MV) increased to become the predominant surface structure, and TSPs decreased substantially. The vitelline surface of fertilized oocytes (at 6 and 20 hr) was similar to that of the matured oocytes, but unfertilized oocytes had less dense MV than did fertilized oocytes (at 20 hr). The diameter of the oocytes decreased from 99 to 80 microns during maturation and increased to 106 microns after insemination (P < 0.05). Membrane maturation was characterized by surface changes from a TSP-predominant pattern to a MV-predominant pattern. Thus, the bovine oocyte maturation process was found to involve the expansion of cumulus cells and the maturation of the ZP, which changes dramatically upon fertilization. Also, volumetric changes occurred in ooplasm processed for SEM following oocyte maturation and insemination.     

A novel strategy of cell targeting based on tissue-specific expression of the ecotropic retrovirus receptor gene

Gene transfer into specific tissues or cell types is a key technique in the development of gene therapy. Modification of vector particles such that they selectively bind to the target cells has been attempted, but the limitation of this approach is the low transduction efficiency. Here, we show that a two-step gene transfer system can be used for efficient cell targeting. With this strategy, and using a high-titer adenoviral vector containing a tissue-specific promoter, we have engineered a system in which only target cells become susceptible to retrovirus-mediated transduction. In a model experiment, we constructed an adenoviral vector (Ad.AFPEcoRec) containing the ecotropic retrovirus receptor (EcoRec) gene under the control of the alpha-fetoprotein (AFP) promoter. A binding assay showed that after transduction with AD.AFPEcoRec, EcoRec molecules were efficiently expressed in AFP+HepG2 cells, but not in AFP-HeLa and AFP-HLE cells. The EcoRec-expressing HepG2 cells could be stably transduced with ecotropic retroviral vectors, whereas HeLa and HLE cells remained highly resistant to retrovirus-mediated gene transfer. The apparent titer on HepG2 cells was greater than 2 x 10(5) CFU/ml. Because various tissue-specific promoter/enhancer elements are available, the two-step system could be used as a general strategy for both ex vivo and in vivo targeted gene transfer.     

Modeling of the pharyngeal muscle in Caenorhabditis elegans based on FitzHugh-Nagumo equations

The pharyngeal pumping motion to send food to the bowel is a rhythmic movement in Caenorhabditis elegans. This paper proposes a simulation-based approach to investigate the mechanisms of rhythm phenomena in the pharyngeal pumping motion. To conduct the simulations, first, we developed a pharyngeal muscle model including 29 cell models which simulate the activity of each cell as a membrane potential based on FitzHugh-Nagumo equations. Then, to compare the response of the model with that of C. elegans, we calculated the electropharyngeogram (EPG), which represents the electrophysiological responses of the pharyngeal cells, using the simulated membrane potentials. The results confirmed that our model could generate the EPG similar to that measured from C. elegans. We proposed a computer simulation of the pumping motion to investigate the mechanisms of rhythm phenomena in living organisms.     

A lightweight sensing method of tooth-touch sound for disabled person using remote controller

To support disabled people to use remote controllers, several biological signals are used. The tooth-touch is one of desirable biological signals. This is because it is the simple and natural human behavior. However, a sophisticated signal processing to extract only the tooth-touch sound is needed since the tooth-touch sound is mixed with the voice sound. This paper proposes a lightweight sensing method extracting the tooth-touch without a sophisticated signal processing to eliminate only voice sound from the sound wave in which tooth-touch and voice are mixed. Instead of the audible sound wave, proposal uses a shock wave (i.e., ultrasonic wave) which is generated when the upper tooth and the lower tooth hit each other. Using the shock wave generated to detect the tooth-touch, a trivial high-pass filter can eliminate only voice sound in the lower frequency domain than in the ultrasonic domain including the tooth-touch. Through a preliminary experiment that uses a conventional microphone and well-known digital high-pass filter, we show that the used electret microphone can sense the tooth-touch as ultrasonic wave and the high-pass filter can extract only tooth-touch. Then, we show some robustness of our method by using the sound waves including the voice and tooth-touch. In addition, we design the filtering hardware to implement a small and cheap system-on-chip achieving a real-time operation. Through the implementation of Field Programmable Gate Array, and the simulation, we show that our hardware is small and performs well for a real-time operation.     

Thickness dependence of H2 gas sensor in amorphous SnQx films prepared by ion-beam sputtering

Amorphous SnO_x films were deposited by ion-beam sputtering on sintered alumina substrates. Amorphous film sensors were prepared by annealing the films at 300° C for 2 h in air. The thickness dependence of resistivity and hydrogen gas sensitivity were measured at 150° C over the thickness range 1 to 700 nm. A resistivity maximum was observed in ultrathin films. Resistivity increased by three orders of magnitude with increasing film thickness from 0.9 to 7.4 nm and then decreased by five orders of magnitude from 7.4 to 35 nm. Ultrathin film sensors showed sensitivity maxima around a thickness of 10 nm. Sensitivity and resistivity of ultrathin films were significantly influenced by the thermal expansion coefficient and the surface state of the substrate.     

Properties of indium oxide/tin oxide multilayered films prepared by ion-beam sputtering

The preparation and characterization of indium oxide (InO _x )/tin oxide (SnO _y ) multilayered films deposited by ion-beam sputtering are described and compared with indium tin oxide (ITO) films. The structure and the optoelectrical properties of the films are studied in relation to the layered structures and the post-deposition annealing. Low-angle X-ray diffraction analysis showed that most films retained the regular layered structures even after annealing at 500° C for 16 h. As an example, we obtained a resistivity of 6×10^–4 cm and a transparency of about 85% in the visible range at a thickness of 110 nm in a multilayered film of InO _x (2.0 nm)/SnO _y (0.2 nm)×50 pairs when annealed at 300° C for 0.5 h in air. Hall coefficient measurements showed that this film had a mobility of 17 cm² V^–1 sec^–1 and a carrier concentration (electron density) of 5×10²⁰ cm^–3.     

Pressure-induced conversion of α-connectin to β-connectin

The mechanism of the pressure-induced tenderization of meat has not been fully established in spite of its beneficial effect. To detect the changes in the large structural proteins of the myofibrils induced by pressurization without heat treatment, high hydrostatic pressure (100-300 MPa) was applied to rabbit at-death skeletal muscle for 10 min at low temperature (0-2°C). Significant differences in the electrophoretic pattern of connectin (also called titin) in isolated myofibrils were observed between the control and pressurized muscle samples. The conversion of α-connectin (2800 kDa) to β-connectin (2100 kDa) was accelerated with increasing pressure applied to the muscle; also nebulin (800 kDa) was degraded by pressure treatment. From the results it is clear that the degradation of connectin is induced by pressurization alone without heat treatment. If the conversion of α-connectin to β-connectin during conditioning has some influence on meat tenderization, the pressure-induced conversion of α- to β-connectin is possibly one of the causes of pressure-induced tenderization of meat.     

Deformation of NiO single crystals below room temperature: dislocation configurations

NiO single crystals prepared by two crystal growth techniques (zone melting in an arc-image furnace and Verneuil crystallization have been deformed by compression along 001 at temperatures as low as 4.2 K, and the dislocation substructure observed by transmission electron microscopy. The Peierls mechanism has been suggested as the mechanism controlling the mechanical behaviour at the lower temperatures. The dislocations generated at cavities found in the zone-melted crystals may be responsible for the increase of the flow stress of these crystals compared with the Verneuil ones.     

Surface tension of liquid3He and4He near the liquid-gas critical point

The surface tension of liquid³He and⁴He was measured near the gas-liquid critical points in the reduced temperature range 3×10^–4–1, where t (T _c –T)/T _c . The critical exponents were found to be ₃=1.289±0.015 for³He and ₄=1.306±0.017 for⁴He. These values are very close to those for classical liquids, and are consistent with the value of 1.28 predicted by Widom, but are apparently different from the exponents previously obtained for liquid helium isotopes, which are near unity. The critical coefficients show good agreement with the quantum-corrected corresponding states theory for the Lennard-Jones 6–12 potential discussed by Young. The interface thickness is deduced from Widom's theory to bed=d ₀t^–v withd ₃₀=0.14±0.03nm and v₃=0.57±0.04 for³He, andd ₄₀=0.37±0.07 nm and v₄=0.58±0.01 for⁴He.