Formation of a novel 20-hydroxylated metabolite of lipoxin A4 by human neutrophil microsomes

Lipoxin A4 (LXA4) is a biologically active compound produced from arachidonic acid via interactions of lipoxygenases. Incubation of LXA4 either with human neutrophils or with the neutrophil microsomes leads to formation of a polar compound on a reverse-phase high-performance liquid chromatography. We have identified the metabolite as 20-hydroxy-LXA4, a novel metabolite of arachidonic acid, on the basis of ultraviolet spectrometry and gas chromatography-mass spectrometry. The LXA4 omega-hydroxylation requires both molecular oxygen and NADPH, and is inhibited by carbon monoxide, by antibodies raised against NADPH-cytochrome P-450 reductase, or competitively by leukotriene B4 (LTB4) and LTB5, substrates of LTB4 omega-hydroxylase. These findings indicate that the formation of 20-hydroxy-LXA4 is catalyzed by a neutrophil cytochrome P-450, the LTB4 omega-hydroxylase.     

Higher expression of topoisomerase II in lung cancers than normal lung tissues: different expression pattern from topoisomerase I

To examine the expression of topoisomerase I and topoisomerase II in primary lung cancer specimens at mRNA level, we carried out Northern blot analysis. As for topoisomerase I expression, there was no remarkable difference between lung cancer specimens and non-cancerous lung tissues. On the other hand, we could detect topoisomerase II mRNA in almost all lung cancer specimens, but not in non-cancerous tissues. By Southern blot analysis, we could not detect large deletion nor rearrangement in DNA level. These results suggest that the expression of topoisomerase II is highly increased in lung cancer at mRNA level and drugs against topoisomerase II might be more tumor-specific than those against topoisomerase I.     

Detection of lost alpha particle by concealed lost ion probe

Full orbit-following calculation is performed for the final orbit of the lost alpha particles, showing some orbits escaping from the last closed flux surface could be detected by a concealed lost ion probe (CLIP) installed under the shadow of the original first wall surface. While both passing and trapped orbits hit the same wall panel, detecting a trapped orbit by the CLIP is easier than detecting passing orbits. Whether the final orbit is detected or not is determined by the position of the reflection point. The CLIP successfully detects the trapped orbits, which are reflected before they hit to a first wall. Then the pitch angles of the orbits at the CLIP are close to and smaller than 90°. Optimization of the position of the CLIP in terms of broader detection window is investigated.     

Fast ion charge exchange spectroscopy adapted for tangential viewing geometry in LHD

A tangential Fast Ion Charge eXchange Spectroscopy is newly applied on a Large Helical Device (LHD) for co/countercirculating fast ions, which are produced by high energy tangential negative-ion based neutral beam injection. With this new observation geometry, both the tangential-neutral beam (NB) and a low-energy radial-NB based on positive ions can be utilized as probe beams of the measurement. We have successfully observed Doppler-shifted H-alpha lights due to the charge exchange process between the probing NB and circulating hydrogen ions of around 100 keV in LHD plasmas.     

Characterization of interfacial reaction and chemical bonding features of LaOx/HfO2 stack structure formed on thermally-grown SiO2/Si(1 0 0)

A stack structure consisting of ～1.5 nm-thick LaO_x and ～4.0 nm-thick HfO₂ was formed on thermally grown SiO₂ on Si(1 0 0) by MOCVD using dipivaloymethanato precursors, and the influence of N₂ annealing on interfacial reaction for this stack structure was examined by using X-ray photoelectron spectroscopy and Fourier transform infrared attenuated total reflection. We found that compositional mixing between LaO_x and HfO₂ becomes significant from 600 °C upwards and that interfacial reaction between HfLa_yO_z and SiO₂ proceeds consistently at 1000 °C in N₂ ambience.     

Effect of the Preparation Conditions of Ru/CeO2 Catalysts for the Liquid Phase Oxidation of Benzyl Alcohol

Ceria colloidal particles with a mean crystallite size of 2 nm were synthesized by a solvothermal reaction. The Ru/CeO₂ catalyst prepared from the CeO₂ colloids exhibited higher activity than the catalyst prepared from Ce(NO₃)₃. Temperature-programmed reduction analysis indicated that the reduction of surface Ce⁴⁺ was accelerated by highly dispersed Ru species on the CeO₂ particles and occurred at low temperatures. The single component CeO₂ sample prepared by the coagulation of the CeO₂ colloid was more easily reduced and re-oxidized than the CeO₂ sample prepared by the precipitation method from Ce(NO₃)₃. The higher activity of Ru/CeO₂ prepared from the CeO₂ colloids came from the inherent nature of the CeO₂ support itself.     

Preparation and photocatalytic activity of Keggin-ion tungstate and TiO2 hybrid layer-by-layer film composites

Keggin ions (PW₁₂O₄₀³⁻ (PW₁₂), SiW₁₂O₄₀⁴⁻ (SiW₁₂), H₂W₁₂O₄₀⁶⁻ (H₂W₁₂)) and TiO₂ hybrid thin films were prepared using the layer-by-layer method. Their photocatalytic activities were investigated using gaseous 2-propanol decomposition. All films were transparent in the visible wavelength range. For 2-propanol decomposition, H₂W₁₂ was the most effective for the combination with TiO₂ despite having the smallest TiO₂ deposition amount. The photocatalytic activity of the PW₁₂–TiO₂ hybrid film was increased 2.3 times by visible light with UV illumination. This increase was less remarkable for hybrid films of other Keggin ions, suggesting that the visible light excitation of reduced PW₁₂ plays an important role in the enhancement of 2-propanol decomposition.     

System for augmented human–robot interaction through mixed reality and robot training by non-experts in customer service environments

Human–robot interaction during general service tasks in home or retail environment has been proven challenging, partly because (1) robots lack high-level context-based cognition and (2) humans cannot intuit the perception state of robots as they can for other humans. To solve these two problems, we present a complete robot system that has been given the highest evaluation score at the Customer Interaction Task of the Future Convenience Store Challenge at the World Robot Summit 2018, which implements several key technologies: (1) a hierarchical spatial concepts formation for general robot task planning and (2) a mixed reality interface to enable users to intuitively visualize the current state of the robot perception and naturally interact with it. The results obtained during the competition indicate that the proposed system allows both non-expert operators and end users to achieve human–robot interactions in customer service environments. Furthermore, we describe a detailed scenario including employee operation and customer interaction which serves as a set of requirements for service robots and a road map for development. The system integration and task scenario described in this paper should be helpful for groups facing customer interaction challenges and looking for a successfully deployed base to build on.     

Biocompatible Cubic Boron Nitride: A Noncytotoxic Ultrahard Material

Cubic boron nitride (c-BN) has an ultrahardness and a large bandgap energy like diamond. In the last 30 years, most of the attention has been directed towards the mechanical and electronic applications of c-BN, while its biological potential has been overlooked. The authors report in vitro biocompatibility of high-quality c-BN films prepared by plasma-enhanced chemical vapor deposition using the chemistry of fluorine. c-BN films become superhydrophilic when chemical-treated in hydrogen and nitrogen plasmas with or without the impact of low-energy ions due to a marked increase in polar part of the surface free energy by removal of the fluorine atoms terminating c-BN surfaces. Satisfactory proliferation and differentiation of osteoblastic cells comparable with a control sample and a superhydrophilic nanocrystalline diamond film, and the formation of mineral deposits by biomineralization are confirmed on the superhydrophilic c-BN films with negative values of zeta potential. The results demonstrate a high potential of c-BN as a noncytotoxic ultrahard coating material for biological and biomedical applications.