Adsorption of Zn(II) in Oxisols as affected by selective removal of soil fractions

The relative contribution of organic matter, amorphous and crystalline Fe oxides and Al oxides to soil Zn adsorption was evaluated in contaminated and uncontaminated Brazilian soils. Soil samples were equilibrated with Zn solutions and Zn adsorption was determined using the Langmuir adsorption isotherm. The Fe and Al oxides (non‐silicated clays) and the organic matter contents of the soils were the main contributors to the variation in Zn adsorption. The Zn maximum adsorption capacity in the soil with the greatest sand and organic carbon contents was higher than in the higher clay content soil, which was second in organic carbon content. Related to the whole soil samples, as the soil organic matter was removed, the Zn maximum adsorption capacity decreased in most of the observations. The removal of Fe and Al oxides decreased the soil Zn maximum adsorption capacity in some cases and increased it in others, with no clear variation in the pathway. For both whole soil and soil fractions, the isotherms for Zn adsorption to soil, fitted to the Langmuir equation, showed two linear portions or pathways (Part I and Part II). The bonding energy coefficient was higher in Part I (related to specific chemical adsorption) than in Part II (related to electrostatic interactions), which suggests a higher affinity between Zn and soil particles in Part I as compared with Part II.     

Territorial development in the Cape Verde archipelago under the Estado Novo dictatorship (1953–1974)

Despite Portugal's neutrality in the Second World War (1939–1945), the subsequent new world order meant that the Portuguese Government felt obliged to revise its overseas policies. A new regional awareness could be seen in the Six-Year National Development Plans launched by Estado Novo from 1953 until the revolution of 1974. The territory and its strategic potential were emphasized in the context of national policies of overseas urbanization. Interventions in Cape Verde are visible particularly in the First Development Plan, which was based on equipping the province's public facilities. The methodology of intervention involved setting up missions aimed at planning a set of specific public works which were essential to the development of existing settlements. A sharp increase in the development of the territory through the work of specialized brigades took place in the Third Development Plan, when a set of public works on road, hydraulic and electricity networks was undertaken. The planning of infrastructures that was undertaken in these years was essential to the development of the archipelago and the resulting regional and urban land-use planning of the various islands.     

Characterization of Crude and Partially Purified Lipase from Geotrichum candidum Obtained with Different Nitrogen Sources

Lipases from Geotrichum candidum were produced in two different medium: A = 12 % (w/v) clarified corn steep liquor (CCSL) + 0.6 % (w/v) soybean oil (SO) and B = 3.5 % (w/v) yeast hydrolysate (YH) + 0.7 % (w/v) SO. Lipases were partially purified from both media by hydrophobic interaction chromatography using 3.0 mol L^?1 of NaCl as mobile phase, and they were characterized in the crude and partially purified forms. The recovery of lipase activity from CCSL and YH via HIC were 96 and 94.3 %, and the purification factors were 44.3 and 86.7‐fold, respectively. All evaluated lipases had similar optimum pH (7.0–7.7), but, for the CCSL crude lipase, optimum temperature (47 °C) was 10 °C higher than others lipases evaluated. CCSL crude lipase possessed a higher thermo stability than YH crude lipase, e.g., at 37 °C (pH 7.0) the half‐life of CCSL crude lipase was 19.25 h and at pH 8.0 (30 °C) the half‐life was 48 h, which are five and ten times higher than with YH crude lipase, respectively. On the other hand, the YH crude lipase possessed a higher catalytic constant (k_cat = 2.3 min^?1) but with almost the same catalytic efficiency (K_m/k_cat = 32.12 mg mL min^?1) in relation to CCSL crude lipase. The lipases differ in biocatalytic properties between substrates, suggesting that the two lipases can be employed for different applications.     

Formulation of a Biodegradable Detergent for Cleaning Oily Residues Generated during Industrial Processes

The use of toxic petroleum-based heavy oils is common in industrial processes. The cleaning of machines, equipment, and other surface covered in these oils is achieved with expensive products that are often also toxic and harmful to both the health of workers and the environment. The present paper proposes the development of a sustainable biodetergent made from plant-based materials. Tests were performed to determine the properties of the biodetergent in terms of its surfactant and emulsifying capacities, stability, toxicity, and the removal of heavy oil from glass plates and metallic surfaces. The formulation was composed of a natural solvent (cottonseed oil), a plant-based surfactant agent (saponin), and two natural stabilizers (carboxymethylcellulose and glycerine). The formulation was stable, nontoxic, and highly efficient, removing 100% of the heavy oil from glass and metallic surfaces. This solution developed in this study could be used in diverse industries with the need to clean machines and parts encrusted with oil and grease as well as the cleaning of floors covered with petroleum-based residues. A preliminary analysis of the economic feasibility of using the detergent was carried out at a Brazilian power plant. Besides the reduction in environmental impact due to the use of a nontoxic, biodegradable product as well as the reduction in health risks to workers associated with toxic cleaning products, this new product can have a considerable impact on the market as an environmentally friendly solution.     

Stress and strain distribution in demineralized enamel: A micro‐CT based finite element study

Physiological oral mechanical forces may play a role on the progression of enamel carious lesions to cavitation. Thus, the aim of this study was to describe, by 3D finite element analysis, stress, and strain patterns in sound and carious enamel after a simulated occlusal load. Micro‐CT based models were created and meshed with tetrahedral elements (based on an extracted third molar), namely: a sound (ST) and a carious tooth (CT). For the CT, enamel material properties were assigned according to the micro‐CT gray values. Below the threshold corresponding to the enamel lesion (2.5 g/cm³) lower and isotropic elastic modulus was assigned (E = 18 GPa against E₁ = 80 GPa, E₂ = E₃ = 20 GPa for sound enamel). Both models were imported into a FE solver where boundary conditions were assigned and a pressure load (500 MPa) was applied at the occlusal surface. A linear static analysis was performed, considering anisotropy in sound enamel. ST showed a more efficient transfer of maximum principal stress from enamel to the dentin layer, while for the CT, enamel layer was subjected to higher and concentrated loads. Maximum principal strain distributions were seen at the carious enamel surface, especially at the central fossa, correlating to the enamel cavity seen at the original micro‐CT model. It is possible to conclude that demineralized enamel compromises appropriate stress transfer from enamel to dentin, contributing to the odds of fracture and cavitation. Enamel fracture over a dentin lesion may happen as one of the normal pathways to caries progression and may act as a confounding factor during clinical diagnostic decisions. Microsc. Res. Tech. 78:865–872, 2015. © 2015 Wiley Periodicals, Inc.     

Coordination‐Assisted Bioorthogonal Chemistry: Orthogonal Tetrazine Ligation with Vinylboronic Acid and a Strained Alkene

Bioorthogonal chemistry can be used for the selective modification of biomolecules without interfering with any other functionality that might be present. Recent developments in the field include orthogonal bioorthogonal reactions to modify multiple biomolecules simultaneously. During our research, we observed that the reaction rates for the bioorthogonal inverse‐electron‐demand Diels–Alder (iEDDA) reactions between nonstrained vinylboronic acids (VBAs) and dipyridyl‐s‐tetrazines were exceptionally higher than those between VBAs and tetrazines bearing a methyl or phenyl substituent. As VBAs are mild Lewis acids, we hypothesised that coordination of the pyridyl nitrogen atom to the boronic acid promoted tetrazine ligation. Herein, we explore the molecular basis and scope of VBA–tetrazine ligation in more detail and benefit from its unique reactivity in the simultaneous orthogonal tetrazine labelling of two proteins modified with VBA and norbornene, a widely used strained alkene. We further show that the two orthogonal iEDDA reactions can be performed in living cells by labelling the proteasome by using a nonselective probe equipped with a VBA and a subunit‐selective VBA bearing a norbornene moiety.     

Anticorrosive painting for a wide spectrum of marine atmospheres: Environmental-friendly versus traditional paint systems

This work presents some of the main results obtained in different marine atmospheres by Working Groups 1 and 2 (dedicated to anticorrosive protection of steel by paint coatings) of the Ibero-American PATINA network, developed in the context of the CYTED Programme. As marine atmospheres it includes natural atmospheres with a salinity level above S1 classification of ISO standard 9223 (>3 mg Cl⁻ m⁻² day⁻¹), and sulphur dioxide contamination only up to classification P1 of the same standard (maximum of 35 mg SO₂ m⁻² day⁻¹). Consideration is also made of accelerated tests traditionally used to assess the anticorrosive behaviour of the substrate/paint coatings contemplated in the study, namely salt spray, artificial weathering and different cycles involving ultraviolet radiation, humidity, temperature and different contamination conditions. The substrates were steel, hot-dip galvanised steel and electrogalvanised steel (Zincorr^® sheet). The paint systems applied on these substrates, with or without pretreatments, were solventborne, waterborne, high solid and powder paint systems. As a result it has been possible to conclude which of the studied anticorrosive coating types were the most suitable for each of the different types of marine atmospheres considered in the study.     

Microbiological characterization of randomly selected Portuguese raw milk cheeses with reference to food safety

Seventy raw milk cheeses made in different regions of Portugal, both hard and soft varieties, made with cow's, ewe's, or goat's milk or combinations of these, were sampled within their quoted shelf lives for microbiological safety. On the basis of the presence or numbers of Escherichia coli, E. coli O157, Staphylococcus aureus, Salmonella, and Listeria monocytogenes, cheeses were categorized as satisfactory, acceptable, unsatisfactory, or unacceptable and potentially hazardous. Twenty-two of the 70 cheeses were classified as satisfactory or acceptable. Thirty-seven of the cheeses were considered unsatisfactory because of the presence of E. coli, S. aureus, or both, while 11 of the cheeses were graded as unacceptable and potentially hazardous because of the presence of excessive numbers of S. aureus, E. coli, or L. monocytogenes and the presence of Salmonella in three of these. All cheeses graded as unacceptable and potentially hazardous were soft or semisoft cheeses made with ewe's and goat's milk, with the exception of two hard cheeses made with cow's milk. E. coli O157 was not detected in any of the cheeses. According to the present results, it seems that the presence or counts of pathogenic or indicator organisms in raw milk cheeses cannot be related to the processing conditions, milk type, or region of production.