Biocompatibility and Mechanical Stability of Nanopatterned Titanium Films on Stainless Steel Vascular Stents

Nanoporous ceramic coatings such as titania are promoted to produce drug-free cardiovascular stents with a low risk of in-stent restenosis (ISR) because of their selectivity towards vascular cell proliferation. The brittle coatings applied on stents are prone to cracking because they are subjected to plastic deformation during implantation. This study aims to overcome this problem by using a unique process without refraining from biocompatibility. Accordingly, a titanium film with 1 µm thickness was deposited on 316 LVM stainless-steel sheets using magnetron sputtering. Then, the samples were anodized to produce nanoporous oxide. The nanoporous oxide was removed by ultrasonication, leaving an approximately 500 nm metallic titanium layer with a nanopatterned surface. XPS studies revealed the presence of a 5 nm-thick TiO₂ surface layer with a trace amount of fluorinated titanium on nanopatterned surfaces. Oxygen plasma treatment of the nanopatterned surface produced an additional 5 nm-thick fluoride-free oxide layer. The samples did not exhibit any cracking or spallation during plastic deformation. Cell viability studies showed that nanopatterned surfaces stimulate endothelial cell proliferation while reducing the proliferation of smooth muscle cells. Plasma treatment further accelerated the proliferation of endothelial cells. Activation of blood platelets did not occur on oxygen plasma-treated, fluoride-free nanopatterned surfaces. The presented surface treatment method can also be applied to other stent materials such as CoCr, nitinol, and orthopedic implants.     

Electrolyte/Structure?Dependent Cocktail Mediation Enabling High?Rate/Low?Plateau Metal Sulfide Anodes for Sodium Storage

As promising anodes for sodium-ion batteries, metal sulfides ubiquitously suffer from low-rate and high-plateau issues, greatly hindering their application in f...     

Evaluation of damage to light structures erected on a fill material rich in expansive soil

The paper reports a study of the cause of defects in light structures and the toppling of a wall constructed on a fill material rich in Ankara clay. Laboratory tests were carried out on vertical and horizontal samples from boreholes and a trial pit was excavated near the damaged structures. The results showed that in the vicinity of the toppled wall, swelling pressures in the horizontal direction were greater than those measured in the vertical direction. The swelling properties of the fill material were higher than those of original Ankara clay as determined previously by other investigators, suggesting that breakdown of the cementing bonds and a change in the fabric are the main factors affecting the swelling pressure of disturbed and compacted expansive soils. The calculations to predict uplift showed a good agreement with the observations in the damaged structures. It is concluded that swelling was the main cause of the damage to the light structures at the study site and resulted from the highly expansive nature of the fill material, poor drainage, the semi-arid climate, poor construction methods and ineffective precautions. Some recommendations for minimizing the effects of swelling at the study site are briefly outlined.     

Hierarchical behavior categorization using correlation based adaptive resonance theory

This paper introduces a new model for robot behavior categorization. Correlation based adaptive resonance theory (CobART) networks are integrated hierarchically in order to develop an adequate categorization, and to elicit various behaviors performed by the robot. The proposed model is developed by adding a second layer CobART network which receives first layer CobART network categories as an input, and back-propagates the matching information to the first layer networks. The first layer CobART networks categorize self-behavior data of a robot or an object in the environment while the second layer CobART network categorizes the robot's behavior with respect to its effect on the object. Experiments show that the proposed model generates reasonable categorization of behaviors being tested. Moreover, it can learn different forms of the behaviors, and it can detect the relations between them. In essence, the model has an expandable architecture and it contains reusable parts. The first layer CobART networks can be integrated with other CobART networks for another categorization task. Hence, the model presents a way to reveal all behaviors performed by the robot at the same time.     

Dyeing properties of textiles by Turkish hazelnut (Corylus colurna): leaves,coat, shell and dice

Turkey has a great number of hazelnut trees that possess nutritious components. However, only the inside part of the hazelnut is used as a nutrient, while the rest of it is waste. This study suggests that the waste parts of the Turkish hazelnut could be used as a natural dye for dyeing textile fabrics. The dyeing properties of the leaves, coat, shell and dice of the hazelnut were studied on wool, cotton and viscose fabric by using three different mordants: copper sulphate, iron sulphate and aluminium sulphate. The selected dyed fibre sample surfaces were observed using a scanning electron microscope. The colour strength (K/S), light, washing, rubbing, and perspiration fastness levels of the dyed fabrics were investigated. The experimental natural dyeing results indicate that waste hazelnut‐based products can be used as a natural dye for textile coloration.     

Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al₂NiTi and AlNiTi, and zones 2 and 3 to NiAl.     

Chemical and microbiological status and volatile profiles of mouldy Civil cheese,a Turkish mould‐ripened variety

The objective of this study is to characterise the gross chemical and microbiological status and identify the volatile compounds of mouldy Civil cheeses. A total of forty‐one samples were surveyed, and gross compositional status of the cheeses was (as mean values): 6.5 for pH, 6.2% for fat‐in‐dry matter, 51.8% for moisture and 15.3% for water‐soluble nitrogen (as% of total nitrogen). Chemical composition of the cheese samples varied widely. Mouldy Civil cheese has similar pH values and moisture contents when compared with blue‐type cheeses, but it has distinct feature for fat contents. The microbiological counts of the samples were found to be high and some samples contained coliform bacteria. A total of 95 volatiles, including esters (28), acids (6), ketones (12), aldehydes (3), alcohols (15), terpenes (10), sulphur compounds (3) and miscellaneous (18), were identified in the volatile fractions of the cheeses, and principal volatile groups were esters, alcohols and ketones.     

Maximization of heat transfer density rate from a single row of rhombic tubes cooled by forced convection based on constructal design

The heat transfer density rate from a row of rhombic tubes cooled by forced convection is maximized based on constructal design. A row of parallel rhombic tubes are placed in a fixed volume, the horizontal axis of the tubes is kept constant while the vertical axis of the tubes and the spacing between the tubes are changed to facilitate the heat flow from the tubes to the coolant. The tubes are kept at constant temperature and the incoming free‐stream flow is induced by constant pressure drop. For steady, two‐dimensional, incompressible, and laminar forced convection, the governing equations are solved numerically by finite volume method with SIMPLE algorithm. The dimensionless pressure drop (Bejan number, Be) ranging from 10 ³ to 10 ⁵, the range of the vertical axis of the tube is 0.2 ≤ B ≤ 2, and the working fluid is air ( Pr = 0.71). The results show that the optimal spacing decreases and the maximum heat transfer density increases as the Bejan number increases for all vertical axes of the tube. Bejan number and the bluntness of the tube have a significant effect of the flow structure (separation and vortex formation) around the tubes at the optimal spacings.