Determination of the Fe content of embedded Cu-rich particles in ferritic alloys using energy-filtered TEM

A novel technique for the quantification of the iron content of copper precipitates in ferritic steels is presented. Energy-filtered (EF) imaging has been used to extract elemental maps with high spatial resolution. These maps contain enough information to attempt the quantification of the signal produced by the precipitates when either a line profile is measured across them or the whole image signal is integrated. Assumptions such as sphericity of the precipitates and composition variations are discussed. Special attention to the assessment of drift on the information extracted from EF images has been taken. Minimum detectability and optimum acquisition conditions are discussed.     

Propagation in fretting fatigue from a surface defect

This paper analyses the growth of cracks in fretting fatigue from an initial flaw at the surface. Different crack growth laws are used in order to take into consideration the particular behaviour of short cracks. This methodology is applied to estimate life in various fretting fatigue tests with spherical contact characterized by two different geometries. The material used in the experiments is Al7075. The two geometries present significant differences in the evolution of the stresses, crack growth, etc. which are discussed. The approaches used to model short crack growth give different results, some of them being in good agreement with the experiments.     

Approximate Expressions to Evaluate the Performance in Butene-1 Purification Units

1 INTRODUCTIONSelective hydrogenatioll of small amounts of butynes and butadiene is industrially employedfor obtaining high purity butene-l used as co-monomer in the production of linear low-densitypolyethyene.For this purpose,the content of vinylacetylene.butyne-l and 1,3-butadiene presentin the process stream should be reduced to a few tens of ppm.     

High-Frequency Induction Hardening with Controlled Capacitors-Discharge Pulse-Operation Processes

Induction hardening processes with power pulses obtained by means of capacitors-discharge high-frequency generators are discussed. The process is characterized by high-power densities and heating times on the order of some tens or hundreds of milliseconds together with cooling rates obtained by self-quenching without the use of auxiliary means. The possibility of obtaining the most favorable transient temperature distribution in the workpieces by controlling the shape of the pulses and therefore the variable time rate energy supply is examined. The influence of shape of pulses and discharge circuit's electrical parameters on the heating and cooling transients has been analyzed by a thermal model which allows prediction of the depths of hardening. Measurements from hardening tests carried out on steel samples varying the pulse shapes are given in support of the calculation results.     

Optical characterization and applications of a dual-cure photopolymerizable system

The optical response of a photopolymerizable formulation consisting of a bisphenol A epoxy acrylate oligomer, a divinyl ether, and a photoinitiator system containing Rose Bengal was studied by recording holographic gratings. This blend is sensitive to blue-green light. Single- and double-exposure volume phase holograms were recorded. In addition to these examples, surface depth measurements were made by means of a holographic contour technique.     

The role of 3' UTRs in the mechanisms for segregating mitochondrial proteins

The mitochondrial proteome, meant as the collection of proteins localized in the mitochondrion, whose fundamental function is the energy production for the life of the cell, is estimated to be constituted by at least 1000 proteins. Since the mitochondrial genome codes only for 13 polypeptides, in practice all of them are coded by nuclear genes and are imported in the mitochondrion by means of a sophisticated mechanism of sorting that is not completely known. Most classified mitochondrial proteins are synthesized as precursors with an amino-terminal extension (leader peptide), provided with peculiar physical and structural characteristics that are responsible for the recognition and import system. However, there is experimental evidence that complementary or alternative import systems exist. In particular, the 3' UnTranslated Regions (UTRs) of the mRNAs may be involved, through their secondary structure, in the mechanisms of recognition and localization. In this paper, the information content of different human mRNA sequences has been analyzed, and the results show that a significative short-term correlation exists in the 3' UTR sequences of the mRNA's coding for the proteins provided with leader peptides, probably representing the structural constraints that are necessary to the sorting machinery.     

An experimental study on the applicability of evolutionary algorithms to craniofacial superimposition in forensic identification

Photographic supra-projection is a forensic process that aims to identify a missing person from a photograph and a skull found. One of the crucial tasks throughout all this process is the craniofacial superimposition which tries to find a good fit between a 3D model of the skull and the 2D photo of the face. This photographic supra-projection stage is usually carried out manually by forensic anthropologists. It is thus very time consuming and presents several difficulties. In this paper, we aim to demonstrate that real-coded evolutionary algorithms are suitable approaches to tackle craniofacial superimposition. To do so, we first formulate this complex task in forensic identification as a numerical optimization problem. Then, we adapt three different evolutionary algorithms to solve it: two variants of a real-coded genetic algorithm and the state of the art evolution strategy CMA-ES. We also consider an existing binary-coded genetic algorithm as a baseline. Results on several superimposition problems of real-world identification cases solved by the Physical Anthropology lab at the University of Granada (Spain) are considered to test our proposals.     

The k-simultaneous consensus problem

This paper introduces and investigates the k-simultaneous consensus task: each process participates at the same time in k independent consensus instances until it decides in any one of them. It is shown that the k-simultaneous consensus task is equivalent to the k-set agreement task in the wait-free read/write shared memory model, and furthermore k-simultaneous consensus possesses properties that k-set does not. In particular we show that the multivalued version and the binary version of the k-simultaneous consensus task are wait-free equivalent. These equivalences are independent of the number of processes. Interestingly, this provides us with a new characterization of the k-set agreement task that is based on the fundamental binary consensus problem.     

Possible production of ceramic tiles from marine dredging spoils alone and mixed with other waste materials

Dredging spoils, due to their composition could be considered a new potential source for the production of monolithic ceramics. Nevertheless, abundance of coloured oxides in these materials preclude the possibility of obtaining white products, but not that of producing ceramics with a good mechanical behaviour. As goal of the present research we have produced and studied samples using not only dredging spoils alone, but also mixtures with other waste materials such as bottom ashes from an incinerator of municipal solid waste, incinerated seawage sludge from a municipal seawage treatment plant and steelworks slag. Blending of different components was done by attrition milling. Powders were pressed into specimens which were air sintered in a muffle furnace and their shrinkage on firing was determined. Water absorption, density, strength, hardness, fracture toughness, thermal expansion coefficient of the fired bodies were measured; XRD and SEM images were also examined. The fired samples were finally tested in acidic environment in order to evaluate their elution behaviour and consequently their environmental compatibility. It is observed that, although the shrinkage on firing is too high for the production of tiles, in all the compositions studied the sintering procedure leads to fine microstructures, good mechanical properties and to a limitation of the release of many of the most hazardous metals contained in the starting powders.     

Constructive nonlinear anti-windup design for exponentially unstable linear plants

In this paper we give a constructive method for anti-windup design for general linear saturated plants with exponentially unstable modes. The constructive solution is independent of the controller dynamics so that the size of the (necessarily bounded) operating region in the exponentially unstable directions of the plant state space is large. Desirable properties of the closed-loop are formally proved and shown to induce a very desirable behavior on a MIMO example with two exponentially unstable modes.