Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. II: Effects of dilution,cooling rate,and nucleating agent addition on growth rate

Non-isothermal crystallization growth rates of nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane were determined experimentally by thermal optical microscopy. Adipic acid was used as the nucleating agent. The non-isothermal growth rates of the nucleated and non-nucleated systems were compared with experimentally determined isothermal growth rates. The Lauritzen and Hoffman growth rate equation, originally developed for isothermal crystallization, was modified to describe the non-isothermal growth. The modified Lauritzen-Hoffman equation was used to predict isothermal growth rates from non-isothermal crystallization for the nucleated and non-nucleated polymer-diluent mixtures. This study is the first to deal with polymer-diluent-nucleating agent systems vital to membrane production.     

Circulating fluidized bed combustion of a high-sulphur eastern canadian coal

Combustion tests were carried out with Minto coal in combination with three different limestones in the University of British Columbia (UBC) pilot scale (152 mm square x 7.3 m tall) circulating fluidized bed combustion (CFBC) unit. Operating conditions were chosen to be typical of those employed in large-scale CFBC power boilers. Recycling of fine particles captured by the secondary cyclone was found to be of considerable importance in increasing sulphur capture, enhancing combustion efficiency and reducing the amount of calcium sulphide in the solids residues. NO_x emissions increased as the Ca:S ratio increased. Local gas concentrations inside the reactor were strongly influenced by the core-annulus solids distribution patterns which characterize circulating fluidized beds.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

Development of density distributions in injection molded amorphous engineering plastics. Part I

The gapwise density distributions of the injection molded specimens of two engineering thermoplastics, i.e., poly(phenylene ether) and poly(ether imide), were characterized employing the density gradient column technique. The samples were molded using a 40t Van Dorn injection molding machine. The effects of the thermal history on the density distribution of unconstrained quenched specimens were also investigated. In addition, various material properties, such as pressure-volume-temperature, isothermal contraction, and pressure induced densification behavior were characterized, for the two resins employed in this study. The moldings of the two resins exhibited different trends in their density distributions. These findings were explained in terms of the competing effects of cooling rate and the pressure history experienced by the engineering plastic resins during the molding cycle. The data collected were also used as input to mathematical modeling of density distributions in injection molded articles, which is reported in Part II of this article.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

An interactive lung field segmentation scheme with automated capability

Feasible clinical application of any automated segmenting methodology demands more than just accuracy. Amendment to the automated delineation is necessary when the algorithm fails, however, integrated solution to such a scenario is largely absent in literature. Hence in this survey we devised an architecture that does both the automated and interactive lung field localizations using a single segmenting engine—random walker algorithm—so that intuitive amendment is only necessary when the automated generated delineation is unsatisfactory. The algorithm proceeds by first extracting 18 intensity profiles running horizontally, each of them equally spacing apart, and in each intensity profile three extreme points denoting the two lungs and the esophagus are determined through profile matching. This done, the algorithm removes profiles that do not intersect with the lung, and the rest of the extreme points are plugged into random walker algorithm to perform segmentation. The achieved accuracy in localization by the above was 0.8875 in terms of overlap measure (the maximum value for this parameter is 1) over 341 images. In the case where unsatisfactory delineation prompts amendment necessary, the user can interactively segment the lung by just a shift on some of the previous-determined points to the desired locations, and random walker algorithm is run again with the amended input. By such a fusion, the benefits of both the automated and interactive segmentation are shared in a single architecture.     

Biodegradation of estrogen conjugates by bacteria isolated from river sediments

The objective of this study was to investigate the ability of E. coli in river sediments to degrade estrogen conjugates. Biodegradation experiments on glucuronide estrogens (E1-GLU, E2-GLU and E3-GLU) using E. coli, non-E. coli bacteria as well as sediment crude extracts were carried out in batch mode. A pure identified E. coli strain (KCTC 2571) was used for comparison of enzyme activity. The results showed that the degradation rate of estrogen conjugates by KCTC 2571 and E. coli isolated from sediments followed a similar trend. Fecal bacteria showed a high ability to deconjugate glucuronided estrogens. Approximately 50% of glucuronide moieties were cleaved within 4 h of contact time in experiments using pure E. coli. The degradation rate was slower in experiments using crude extracts of sediments, and conjugated estrogens were not completely degraded even after 12 h of reaction. These results provide a clear understanding of the fate and behavior of estrogen by bacteria in the environment.     

Pitchfork bifurcation and flip-flop operation with a coupled nonlinear system

A ring cavity system consisting of two hybrid Michelson interferometers coupled together with feedback is constructed. This system shows spatial bifurcation and can be utilized as an all-optical flip-flop device. We demonstrate experimentally a flip-flop operation by use of only a positive pulse in this system.     

Preparation of PbTiO3 thin films using an alkoxide-alkanolamine sol-gel system

The stable range of PbTiO₃ sol and the processing conditions of uniform thin films were investigated using a solution of titanium isopropoxide, three kinds of alkanolamines (monoethanolamine, diethanolamine, triethanolamine), lead acetate trihydrate and isopropanol. Depending on the sol state with various alkanolamine/alkoxide molar ratios, diethanolamine (DEA) was very effective in preparing uniform and dense oxide films through room-temperature reaction, owing to its superior stability during the hydrolysis and condensation reaction. Perovskite PbTiO₃ thin films were obtained on oxidized silicon wafer above 550 °C and completely pure films were obtained at 650 °C using DEA as a complexing agent. The dielectric constant and loss tangent of these thin films fired at 650 °C for 30 min were found to be 240 and 0.01 at 1 kHz, respectively.