Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Available and Waiting Times for Cognitive Radios

Cognitive radios (CRs) have been recently proposed for the problem of spectrum scarcity. The principle of CRs?? operation is based on the opportunistic access to the frequency spectrum mainly dedicated to primary users (PUs). The statistical time pattern of PUs?? channel usage and arrival can affect the usability of specific frequency bands for CRs. In this note, the effect of the arrival rate and channel holding time of PUs on the available times for CRs is analyzed. To this end, first, based on Poissonian arrivals, the available time for CRs is calculated. Then, assuming a gamma distribution for the inter-arrival times and a uniform distribution of channel holding time of PU in these intervals, the probability density function and moments of the available time for CRs are derived. Next, the effect of PUs statistical parameters on the average number of packets and the average symbol rate that a CR can transmit is analyzed. Also, taking that CR needs at least T seconds, the average waiting time is calculated.     

Copper Ion Recovery from Mine Water by Ion Flotation

Solutions containing copper ions are produced at copper mines due to its dissolution from ores and dumps. It is important to recover these ions to prevent this toxic element from entering the environment and because it could be economical. We investigated the use of ion flotation for extracting Cu ions from diluted mine water from the Veshnaveh Mine in Qom, Iran. Experiments were conducted using floatation cells at pH 6, 9, and 12 with diluted solutions containing 10 mg L^?1 of Cu. Sodium dodecyl sulfate and hexadecyl trimethyl ammonium bromide (HTAB) were used as collectors and methyl isobutyl carbinol (MIBC) and ethanol were used as frothers. The best result was achieved by maximizing Cu ion recovery and minimizing water recovery at pH 12, using 100 mg L^?1 of HTAB and 0.1 % (v/v) of MIBC. Copper and water recovery were 79 and 24 %, respectively.     

Reservoir volume optimization and performance evaluation of rooftop catchment systems in arid regions: A case study of Birjand,Iran

This study evaluated the performance of rooftop catchment systems in securing non-potable water supply in Birjand, located in an arid area in southeastern Iran. The rooftop catchment systems at seven study sites of different residential buildings were simulated for dry, normal, and wet water years, using 31-year rainfall records. The trial and error approach and mass diagram method were employed to optimize the volume of reservoirs in five different operation scenarios. Results showed that, during the dry water year from 2000 to 2001, for reservoirs with volumes of 200–20000 L, the proportion of days that could be secured for non-portable water supply was on average computed to be 16.4%–32.6% across all study sites. During the normal water year from 2009 to 2010 and the wet water year from 1995 to 1996, for reservoirs with volumes of 200–20000 L, the proportions were 20.8%–69.6% and 26.8%–80.3%, respectively. Therefore, a rooftop catchment system showed a high potential to meet a significant portion of non-potable water demand in the Birjand climatic region. Reservoir volume optimization using the mass diagram method produced results consistent with those obtained with the trial and error approach, except at sites #1, #2, and #5. At these sites, the trial and error approach performed better than the mass diagram method due to relatively high water consumption. It is concluded that the rooftop catchment system is applicable under the same climatic conditions as the study area, and it can be used as a drought mitigation strategy as well.     

Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method

In this study, thermal and small-scale effects on the flapwise bending vibrations of a rotating nanoplate, which can be the basis of nano-turbine design, have been analyzed. The nano-turbine is made of an orthotropic nanoplate with a setting angle that is modeled based on the classical plate theory (CPT) with cantilever boundary conditions. The axial forces are also included in the model as the true spatial variation due to the rotation and temperature change. The governing equations and boundary conditions are derived according to Hamilton's principle and the governing equations are solved with the aid of the generalized differential quadrature method. The effects of small-scale parameter, nondimensional angular velocity, temperature change, and setting angles in the first four nondimensional frequencies are discussed. Due to the consideration of the rotating effects, results of this study are applicable in nano-machines, such as nano-motors, nano-rotor, and other rotating nano-structures. Also, by considering the effect of thermal loading on rotation of a nanoplate, the results are useful in the design of nano-turbines.     

A quantitative approach to study solid state phase coarsening in solder alloys using combined phase-field modeling and experimental observation

In the present work, a quantitative phase-field approach is introduced to study the phase-coarsening phenomena in solder alloys, Pb-Sn alloy here. The most important part of this work is to introduce a simple and versatile approach to quantify the experimental and simulation data, without putting into difficulties corresponding to the stochastic nature of phenomenon, in order to compute unknown physical data required to perform numerical simulation. For this purpose, at first, the evolution of microstructure vs. time is studied experimentally by the conventional optical microscopy. Then, unknown physical data, the interface mobility here, is computed by fitting the time evolution of the total interface perimeter of the simulation results to that of the experimental data. In fact, by this approach, the physical data is computed such that it will be applied to predict reality in the subsequent simulations, i.e., the presented method can be accounted as the calibration of the corresponding mathematical model and numerical method. The validity of the presented approach is supported by comparing simulation data to experimental ones.     

Mechanism of Martensitic to Equiaxed Microstructure Evolution during Hot Deformation of a Near-Alpha Ti Alloy

Metallurgical and Materials Transactions A - In this study, mechanisms of microstructural evolution during hot deformation of Ti-1100 were investigated by EBSD analysis. Misorientation angle...