Synthesis and characterization of hydrophilic nanocomposite coating on glass substrate

Hydrophilic coatings based on 3‐glicidoxy propyl trimethoxy silane (GPTMS) and polyethylene glycol (PEG) were prepared with the incorporation of tetramethoxysilane (TMOS) and silica nanoparticle colloidal suspension by a sol–gel process. Characterization of the coatings has been performed by Fourier Transform Infrared (FTIR) and Attenuated Total Reflectance Infrared (ATR‐IR) techniques. Morphological properties were characterized by Scanning Electron Microscopy (SEM). The distribution of Si atoms in the hybrid system was obtained by Si mapping. The particle size in sol solution of the coating was measured by light scattering analyzer. Optical properties were characterized by using UV–vis spectrophotometer. The hydrophilicity of the coating was determined by contact angle measurements, and also the results have been confirmed by surface energy and water uptake investigations. The obtained results indicate that the surfactants affected the contact angles remarkably but did not change the transparency. It has been found that applying silica nano particles leads to coatings with different properties than those using TMOS, while siloxane contents were the same in these two set of coatings. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5322–5329, 2006     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

Performance evaluation of an importance sampling technique in a Jackson network

Importance sampling is a technique that is commonly used to speed up Monte Carlo simulation of rare events. However, little is known regarding the design of efficient importance sampling algorithms in the context of queueing networks. The standard approach, which simulates the system using an a priori fixed change of measure suggested by large deviation analysis, has been shown to fail in even the simplest network settings. Estimating probabilities associated with rare events has been a topic of great importance in queueing theory, and in applied probability at large. In this article, we analyse the performance of an importance sampling estimator for a rare event probability in a Jackson network. This article carries out strict deadlines to a two-node Jackson network with feedback whose arrival and service rates are modulated by an exogenous finite state Markov process. We have estimated the probability of network blocking for various sets of parameters, and also the probability of missing the deadline of customers for different loads and deadlines. We have finally shown that the probability of total population overflow may be affected by various deadline values, service rates and arrival rates.     

On detecting co-resident cloud instances using network flow watermarking techniques

Virtualization is the cornerstone of the developing third-party compute industry, allowing cloud providers to instantiate multiple virtual machines (VMs) on a single set of physical resources. Customers utilize cloud resources alongside unknown and untrusted parties, creating the co-resident threat—unless perfect isolation is provided by the virtual hypervisor, there exists the possibility for unauthorized access to sensitive customer information through the exploitation of covert side channels. This paper presents co-resident watermarking, a traffic analysis attack that allows a malicious co-resident VM to inject a watermark signature into the network flow of a target instance. This watermark can be used to exfiltrate and broadcast co-residency data from the physical machine, compromising isolation without reliance on internal side channels. As a result, our approach is difficult to defend against without costly underutilization of the physical machine. We evaluate co-resident watermarkingunder a large variety of conditions, system loads and hardware configurations, from a local laboratory environment to production cloud environments (Futuregrid and the University of Oregon’s ACISS). We demonstrate the ability to initiate a covert channel of 4 bits per second, and we can confirm co-residency with a target VM instance in $<$ 10 s. We also show that passive load measurement of the target and subsequent behavior profiling is possible with this attack. We go on to consider the detectability of co-resident watermarking, extending our scheme to create a subtler watermarking attack by imitating legitimate cloud customer behavior. Our investigation demonstrates the need for the careful design of hardware to be used in the cloud.     

On the stability issues of switched singular time‐delay systems with slow switching based on average dwell‐time

The issue of exponential stability analysis of continuous‐time switched singular systems consisting of a family of stable and unstable subsystems with time‐varying delay is investigated in this paper. It is very difficult to analyze the stability of such systems because of the existence of time‐delay and unstable subsystems. In this regard, on the basis of the free‐weighting matrix approach, by constructing the new Lyapunov‐like Krasovskii functional, and using the average dwell‐time approach, delay‐dependent sufficient conditions are derived and formulated in terms of LMIs to check the exponential stability of such systems. This paper also highlights the relationship between the average dwell‐time of the switched singular time‐delay system, its stability, exponential convergence rate of differential states, and algebraic states. Finally, a numerical example is given to confirm the analytical results and illustrate the effectiveness of the proposed strategy. Copyright © 2012 John Wiley & Sons, Ltd.     

A model for the adsorption of single metal ion solutes in aqueous solution onto activated carbon produced from pecan shells

Adsorption isotherms for activated carbon made from pecan shells have been obtained at 25 °C and an approximate pH of 3 for a number of metal ion solutes. It was found that the Slips and Freundlich equations were satisfactory for explaining the experimental data. The correlation of metal ion adsorption with the solute parameters of metal ion electronegativity and first stability constant of the metal hydroxide was investigated. In the case of most of the metal ions studied, higher electronegativities and stability constants corresponded to the higher adsorption levels of metal ions onto the activated carbon. A correlation was developed that predicts the constants of the Freundlich equation from the selected parameters of the metal ions, and thus can predict the adsorption isotherms at constant pH. The developed correlation gives results with acceptable deviations from experimental data. A procedure is proposed for obtaining similar correlations for different conditions (temperature, pH, carbon type and dosage). The ratio of equivalent metal ions adsorbed to protons released is calculated for the studied metal ions over a range of concentrations. In most cases, particularly at low concentrations, this ratio is close to one, confirming that ion exchange of one proton with one equivalent metal ion is the dominant reaction mechanism.     

Simulation of clinker grinding circuits of cement plant based on process models calibrated using GA search method简

Particle size distributions of obtained samples from several sampling campaigns were determined and raw data were mass balanced before being used in simulation studies.After determination of breakage function,selection function,Bond work index,residence time distribution parameters,and Whiten＇s model parameters for air separators and diaphragms between the two compartments of tube ball mills,performance of the circuits was simulated for given throughputs and feed particle size distribution.Whiten＇s model parameters were determined by GA（genetic algorithm） toolbox of MATLAB software.Based on implemented models for modeling and simulation,optimization of circuits was carried out.It increased nearly 10.5% and 15.8% in fresh feed capacity input to each tube ball mill.In addition,circulating load ratios of circuits are modified to 118% and 127% from low level of 57% and 22%,respectively,and also cut points of air separators are adjusted at 30 and 40 μm from high range of 53 and 97 μm,respectively.All applications helped in well-operation and energy consumption reduction of equipments.     

Quantifying nonclassicality of correlations based on the concept of nondisruptive local state identification

A bipartite state is classical with respect to party A if and only if party A can perform nondisruptive local state identification (NDLID) by a projective measurement. Motivated by this we introduce a class of quantum correlation measures for an arbitrary bipartite state. The measures utilize the general Schatten p-norm to quantify the amount of departure from the necessary and sufficient condition of classicality of correlations provided by the concept of NDLID. We show that for the case of Hilbert–Schmidt norm, i.e., \(p=2\), a closed formula is available for an arbitrary bipartite state. The reliability of the proposed measures is checked from the information-theoretic perspective. Also, the monotonicity behavior of these measures under LOCC is exemplified. The results reveal that for the general pure bipartite states these measures have an upper bound which is an entanglement monotone in its own right. This enables us to introduce a new measure of entanglement, for a general bipartite state, by convex roof construction. Some examples and comparison with other quantum correlation measures are also provided.     

Using mobile node speed changes for movement direction change prediction in a realistic category of mobility models

In order to evaluate performance of protocols for ad hoc networks, the protocols have to be tested under realistic conditions. These conditions may include a reasonable transmission range, a limited buffer size, and realistic movement of mobile users (mobility models). In this paper, we propose a new and realistic type of random mobility models in which the mobile node has to decelerate to reach the point of direction change and accelerates with a defined acceleration to reach its intended speed. This realistic mobility model is proposed based on random mobility models. In reality, mobile objects tend to change their speed when they are going to change their direction, i.e. decelerate when approaching a direction change point and accelerate when they start their movement in a new direction. Therefore, in this paper, we implement this behavior in random mobility models which lack such specification. In fact, this paper represents our effort to use this accelerated movement to anticipate a probable direction change of a mobile node with reasonable confidence. The simulation type of this paper is based on traces produced by a mobility trace generator tool. We use a data mining concept called association rule mining to find any possible correlations between accelerated movement of mobile node and the probability that mobile node wants to change its direction. We calculate confidence and lift parameters for this matter, and simulate this mobility model based on random mobility models. These simulations show a meaningful correlation between occurrence of an accelerated movement and event of mobile node's direction change.