A MIP based heuristic for capacitated MRP systems

Although Material Requirements Planning (MRP) is the most widely used production planning tool in today’s manufacturing companies, its inability to perform an exhaustive capacity planning, lack of a comprehensive and integrated shop floor extension and using constant and inflated lead times necessitate intelligent methods for developing cost effective production plans. A single optimization model might be employed to overcome these limitations, but it would be intractable to use it in large manufacturing systems. Hence, in this paper, we propose a heuristic method called Capacity Allocater and Scheduler, CAS, to eliminate drawbacks of MRP systems and provide solutions for large-scale instances. The CAS procedure, based on iteratively solving relaxed Mixed Integer Programming (MIP) models, is built on a lot sizing and scheduling framework, which considers both supply alternatives and lot size restrictions simultaneously. Finally, we give a detailed numerical example to demonstrate how CAS may be used in practice, and provide our concluding remarks.     

Effect of Bicarbonate Salts and Sequential Using of Frying Oil on Acrylamide and 5-Hydroxymethylfurfural Contents in Coated Fried Chicken Meat

In this research, the effect of different bicarbonate salts (sodium and ammonium) and their doses (0, 1, 2, and 3 g/100 g raw material) in the coating batter formula use and the sequential use of frying oil (1st, 2nd, 3rd, and 4th) on 5-hydroxymethylfurfural and acrylamide contents in coated fried chicken meat. The addition of sodium bicarbonate was efficient for reducing acrylamide content, but it increased browning and 5-hydroxymethylfurfural content compared to the control. When increasing the doses of sodium and ammonium bicarbonate from 1 to 3 g/100 g of raw material, the acrylamide content of samples did not change significantly, although adding sodium bicarbonate significantly reduced the acrylamide content as a control. These research results showed that using about 1 g/100 g raw material sodium bicarbonate rather than ammonium bicarbonate and as little frying oil as possible use during the production of coated and fried meat results in lower contents of 5-hydroxymethylfurfural and acrylamide.     

A new acylated and oleanane-type triterpenoid saponin from Gypsophila arrostii roots

A new acylated and triterpenoidal saponin, named GS1, was isolated from the roots of Gypsophila arrostii Guss. On the basis of acid hydrolysis, comprehensive spectroscopic analyses and comparison with spectral data of known compounds, its structure was established as 3-O-β-D-xylopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyranosyl-{21-O-[(E)-3,4,5trimethoxycinnamoyl]}21-hydroxygypsogenin 28-O-β-D-glucopyranosyl-(1→2)- [β-D-arabinopyranosyl-(1→3)]-β-D-xylopyranosyl-(1→3]-α-L-rhamnopyranosyl ester. This article deals with the isolation and structural elucidation of new acylated and oleanane-type saponin.     

Fracture load and microcrack comparison of crowns manufactured from tooth‐shaped and traditional blocks

This study intended to analyze microcracks and fractographic markings on the surface of all ceramic crowns after milling and compare the fracture loads. 90 crowns were manufactured from two feldspathic (Priticrown‐Pr and Vita Mark II‐Vi) and a lithium disilicate (EmaxCAD‐Em) blocks (n = 30). Two groups (n = 15) were prepared for each ceramic. In the first group, crowns were analyzed twice via the fluorescent penetrant method for microcrack detection, after the manufacturing process and thermal cycles. The load to fracture test was applied at a crosshead speed of 0.5 mm/min until catastrophic failure. Second group crowns were directly cemented onto the Co‐Cr dies following the manufacturing process and loaded to fracture. Fractographic markings were analyzed through scanning electron microscope. Spearman correlation analysis, Kruskal–Wallis H test, Mann–Whitney U test, and Wilcoxon Signed Rank test were applied (α = .05). Fracture loads of Em crowns were higher than other groups (p < .05), with and without the aging procedure. Except for second group Pr (r = ?.532), no significant relationship was found between microcrack numbers and fracture loads (p > .05). Thermal cycling did not affect microcrack numbers and fracture loads (p > .05). Tooth‐shaped multilayered Pr blocks did not provide an advantage in terms of microcrack and fracture loads.     

Composition dependences of thermodynamical properties associated with Pb-free ternary,quaternary, and quinary solder systems

In the present study, Chou’s General Solution Model (GSM) has been used to predict the enthalpy and partial enthalpies of mixing of the liquid Ag–In–Sn ternary, Ag–In–Sn–Zn quaternary, and Ag–Au–In–Sn–Zn quinary systems. These are of technical importance to optimize lead-free solder alloys, in selected cross-sections: x_In/x_Sn = 0.5/0.5 (ternary), Au–In_0.1–Sn_0.8–Zn_0.1, Ag–In_0.1–Sn_0.8–Zn_0.1 (quaternary), and t = x_Au/x_In = 1, x_In = x_Sn = x_Zn (quinary) at 1173, 773, and 773 K, respectively. Moreover, the activity of In content in the ternary alloy system Ag–In–Sn has been calculated and its result is compared with that determined from the experiment, while the activities of Ag contents associated with the alloys mentioned above have been calculated. The other traditional models such as of Colinet, Kohler, Muggianu, Toop, and Hillert are also included in calculations. Comparing those calculated from the proposed GSM with those determined from experimental measurements, it is seen that this model becomes considerably realistic in computerization for estimating thermodynamic properties in multicomponent systems.     

Quinoxaline derivatives as long wavelength photosensitizers in photoinitiated cationic polymerization of diaryliodonium salts

The present paper is focused on visible light initiated cationic polymerizations. Photoinitiated polymerization of representative vinyl ether and oxirane monomers using two quinoxaline derivatives; namely (2-(2,3-dihydrobenzo [b][1,4]dioxin-6-yl)-3-(2,3-dihydrobenzo[b]-[1,4]dioxin-7-yl)-5-(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-8-(2,3-dihydrothieno[3,4-b][1,4]dioxin-7yl) quinoxaline) (DBQEd) and 2,3,5,8-tetra(thiophen-2-yl)quinoxaline (TTQ) are studied. Novel dyes based on the quinoxaline skeleton are employed as efficient photosensitizers in cationic photopolymerizations. Polymerizations were initiated at room temperature upon irradiation with long-wavelength UV and visible lights in the presence of diphenyliodonium hexafluorophosphate (Ph₂I⁺PF₆^?). The progress of the polymerizations was monitored by optical pyrometry (OP). Solar irradiation is also employed to carry out the cationic polymerization of a diepoxide monomer in the presence of air.     

Estimated anthropometric measurements of Turkish adults and effects of age and geographical regions

The purpose of this paper is to estimate the anthropometric characteristics of the Turkish population by geographical region, age and gender. A survey of 4205 samples consisting of 2263 male and 1942 female civilian subjects was done in the year of 2007. It contains data from all seven geographical regions of Turkey and from all age groups. In the study, height and weight of the subjects were measured by age. Then, these data were used for estimating anthropometric measurements of the Turkish population. The main result of this study is the anthropometric measurements table for Turkey which shows 37 measurements that are commonly used in industry. The anthropometric measurements that are used to make the designs fit human shape and the human/machine or human/environment interface should be updated through time due to changing body types over time (secular trends) due to numerous factors. In this study, we not only update these variables, which are 30 years old, but also investigate the age and region effects on stature and weight of Turkish population.Relevance to industry: During the design phase of a product, incorporating anthropometric information would yield more efficient designs, which are more user friendly, safer and enable higher performance and productivity. So the anthropometric measurements table that is extracted from this study can be used by industry to produce better human oriented products for Turkish population.