The structural,morphological, optical and gas-sensing properties of Mn3O4 thin films grown by successive ionic layer adsorption and reaction technique

Journal of Materials Science: Materials in Electronics - In this study, Mn3O4 thin films were grown by Successive Ionic Layer Adsorption and Reaction Technique (SILAR) with 20 and 50...     

The effect of aggregation on the nonlinear optical absorption performance of indium and gallium phthalocyanines in a solution and co-polymer host

The nonlinear optical properties (NLO) of Pcs can be modified by substituting different metal atoms into the ring or altering peripheral and axial functionalities. In this study, nonlinear optical absorption properties of tetra-substituted gallium and indium phthalocyanine complexes both in solution and polymeric film have been investigated by open aperture Z-scan measurements with nanosecond pulses at 532 nm. All investigated compounds exhibited reverse saturable absorption for both solution and film experiments. The investigated compounds in the solution showed better nonlinear optical absorption properties than polymeric films. The observed nonlinear optical absorption differences depending on the aggregation are discussed using the ultrafast dynamics and decay processes of excited states found from femtosecond pump-probe spectroscopy with white light continuum experiments.     

Measurements of Thermal Conductivity Variations with Temperature for the Organic Analog of the Nonmetal–Nonmetal System: Urea–4-Bromo-2-Nitroaniline

Thermal conductivity variations with temperature for solid phases in the Urea (U)–[X] mol pct 4-bromo-2-nitroaniline (BNA) system (X = 0, 2, 45, 89.9, and 100) were measured using the radial heat flow method. From graphs of thermal conductivity variations with temperature, the thermal conductivities of the solid phases at their melting temperature and temperature coefficients for the U–[X] mol pct BNA system (X  =  0, 2, 45, 89.9, and 100) were found to be 0.26, 0.55, 0.46, 0.38, and 0.23 W/Km and 0.007781, 0.005552, 0.002058, 0.002188, and 0.002811 K^?1, respectively. The ratios of thermal conductivity of the liquid phase to thermal conductivity of the solid phase in the U–[X] mol pct BNA system (X  =  0, 2, 45, 89.9, and 100) were also measured to be 0.30, 0.44, 0.46, 0.49, and 0.51, respectively, with a Bridgman-type directional solidification apparatus at their melting temperature.     

Solid–Liquid Interfacial Energy of Solid Neopentylglycol Solution in Equilibrium with Neopentylglycol–Aminomethylpropanediol Eutectic Liquid

The grain boundary groove shapes for solid neopentylglycol solution (NPG-40 mol pct AMPD) in equilibrium with the neopentylglycol (NPG)–aminomethylpropanediol (AMPD) eutectic liquid (NPG-42.2 mol pct AMPD) have been directly observed using a horizontal linear temperature gradient apparatus. From the observed grain boundary groove shapes, the Gibbs–Thomson coefficient (Г) and solid–liquid interfacial energy (σ _SL) of solid NPG solution have been determined to be (7.4 ± 0.7) × 10^?8 K m and (6.4 ± 1.0) × 10^?3 J m^?2, respectively. The grain boundary energy of solid NPG solution has been determined to be (12.5 ± 1.0) × 10^?3 J m^?2 from the observed grain boundary groove shapes. The ratio of thermal conductivity of equilibrated eutectic liquid to thermal conductivity of solid NPG solution has also been determined to be 0.48.     

Renal excretory responses produced by the delta opioid agonist, BW373U86, in conscious rats

This study compared the traditional two-compartment (fat mass or FM; fat free mass or FFM) hydrodensitometric method of body composition measurement, which is based on body density, with three (FM, total body water or TBW, fat free dry mass)- and four (FM, TBW, bone mineral mass or BMM, residual)-compartment models in highly trained men (n = 12), sedentary men (n = 12), highly trained women (n = 12), and sedentary women (n = 12). The means and variances for the relative body fat (%BF) differences between the two- and three-compartment models [2.2 +/- 1.6 (SD) % BF; n = 48] were significantly greater (P 相似文献   

Modifying the structure of red mud by simple treatments for high and stable performance in COx-free hydrogen production from ammonia

Red mud (RM) modified by various treatments was used as a catalyst for ammonia decomposition. Catalytic activity measurements performed at 500 °C and differential conversions illustrated that the rate increases with a decrease in the size of Fe₃N_y nanoparticles formed during activation in NH₃ flow. Measurements at 700 °C showed that a catalyst prepared by digesting RM in 6 M HCl followed by calcination at 900 °C provides a stable ammonia conversion of 98.8 ± 0.5% for more than 70 h at a space velocity of 120 000 cm³ NH₃ h^?1 g_cat^?1. This rate is premier among all iron-based catalysts in terms of both activity and stability and even on par with the performance of other non-noble metal catalysts. Detailed characterization indicated Fe₃N_y species readily available on the surface as the active species. Results provided here enable the utilization of RM as an environmentally-friendly, highly efficient, and almost cost-free catalyst for CO_x-free hydrogen production.     

HANDS: a multimodal dataset for modeling toward human grasp intent inference in prosthetic hands

Intelligent Service Robotics - Upper limb and hand functionality is critical to many activities of daily living, and the amputation of one can lead to significant functionality loss for...