Optimization of annealing cycle parameters of dual phase and interstitial free steels by multiobjective genetic algorithms

Data-driven models have been constructed for Dual Phase (DP) and Interstitials Free (IF) steels using an evolutionary approach. DP steel data are utilized from an existing database, while for the IF steels, data generated at an integrated steel plant have been used. The objective function for Ultimate Tensile Strength (UTS) and % elongation, created as data-driven models, is simultaneously optimized for an optimum strength-ductility balance and the results indicate the possibilities of developing steels with better mechanical properties than what are known to have been existing so far.     

Efficient and 1,8-diiodooctane-free ternary organic solar cells fabricated via nanoscale morphology tuning using small-molecule dye additive

The ternary strategy for incorporating multiple photon-sensitive components into a single junction has emerged as an effective method for optimizing the nanoscale morphology and improving the device performance of organic solar cells (OSCs).In this study,efficient and stable ternary OSCs were achieved by introducing the small-molecule dye (5E,5'E)-5,5'-(4',4″-(1,2-diphenylethene-1,2-diyl)bis(biphenyl-4',4-diyl))bis(methan-1-yl-1-ylidene)bis(3-ethyl-2-thioxothia zolidin-4-one) (BTPERn) into poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiopheneco-3-fluorothieno[3,4-b]thiophene-2-carboxylate] (PTB7-Th):[6,6]-phenyl C71 butyric acid methyl ester (PC71BM) blend films processed using a 1,8-diiodooctane (DIO)-free solvent.The incorporation of BTPE-Rn enhanced the short-circuit current density and fill factor of the ternary OSCs compared with those of binary OSCs.An investigation of the optical,electronic,and morphological properties of the ternary blends indicated that the third component of BTPE-Rn not only promoted the photon utilization of blends through the energy-transfer process but also improved the electron mobility of the blends owing to the fullerene-rich nanophase optimization.More importantly,this ternary strategy of utilizing a small-molecule dye to replace the photounstable DIO additive enhanced the operational stability of the OSCs.     

Nanowire encapsulation with polymer for electrical isolation and enhanced optical properties

Light management and electrical isolation are essential for the majority of optoelectronic nanowire (NW) devices.Here,we present a cost-effective technique,based on vapor-phase deposition of parylene-C and subsequent annealing,that provides conformal encapsulation,anti-reflective coating,improved optical properties,and electrical insulation for GaAs nanowires.The process presented allows facile encapsulation and insulation that is suitable for any nanowire structure.In particular,the parylene-C encapsulation functions as an efficient antireflection coating for the nanowires,with reflectivity down to ＜1％ in the visible spectrum.Furthermore,the parylene-C coating increases photoluminescence intensity,suggesting improved light guiding to the NWs.Finally,based on this process,a NW LED was fabricated,which showed good diode performance and a clear electroluminescence signal.We believe the process can expand the fabrication possibilities and improve the performance of optoelectronic nanowire devices.     

Challenges in Liquid‐Phase Exfoliation,Processing, and Assembly of Pristine Graphene

Recent developments in the exfoliation, dispersion, and processing of pristine graphene (i.e., non‐oxidized graphene) are described. General metrics are outlined that can be used to assess the quality and processability of various “graphene” products, as well as metrics that determine the potential for industrial scale‐up. The pristine graphene production process is categorized from a chemical engineering point of view with three key steps: i) pretreatment, ii) exfoliation, and iii) separation. How pristine graphene colloidal stability is distinct from the exfoliation step and is dependent upon graphene interactions with solvents and dispersants are extensively reviewed. Finally, the challenges and opportunities of using pristine graphene as nanofillers in polymer composites, as well as as building blocks for macrostructure assemblies are summarized in the context of large‐scale production.     

Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W–Cu Composites

Tungsten is of industrial relevance due its outstanding intrinsic properties (e.g., highest melting‐point of all elements) and therefore difficult to 3D‐print by conventional methods. Here, tungsten micro‐lattices are produced by room‐temperature extrusion‐based 3D‐printing of an ink comprising WO₃–0.5%NiO submicron powders, followed by H₂‐reduction and Ni‐activated sintering. The green bodies underwent isotropic linear shrinkage of ≈50% during the thermal treatment resulting in micro‐lattices, with overall 35–60% open‐porosity, consisting of 95–100% dense W–0.5%Ni struts having ≈80–300 μm diameter. Ball‐milling the powders and inks reduced the sintering temperature needed to achieve full densification from 1400 to 1200 °C and enabled the ink to be extruded through finer nozzles (200 μm). Partial sintering of the struts is achieved when NiO is omitted from the ink, with submicron interconnected‐porosity of ≈34%. Several tungsten micro‐lattices are infiltrated with molten copper at 1300 °C under vacuum, resulting in dense, anisotropic W–Cu composites with 40–65% tungsten volume fraction. Partially sintered struts (containing nickel) with submicron open porosity are also infiltrated with Cu, resulting in co‐continuous W–Cu composites with wide W struts/Cu channels at the lattice scale (hundreds of micrometers), and fine W–Cu interpenetrating network at the strut scale (hundreds of nanometers) allowing for the design of anisotropic mechanical and electrical properties.

     

Inhibition of neuronal calcium channels by a novel peptide spider toxin, DW13.3

Peptide toxins have proved to be useful agents, both in discriminating between different components of native calcium channel currents and in the molecular isolation and designation of their cloned channel counterparts. Here, we describe the isolation and characterization of the biochemical and physiological properties of a novel 74-amino acid peptide toxin (DW13.3) extracted from the venom of the spider Filistata hibernalis. The subtype specificity of DW13.3 was investigated using calcium channel currents recorded from two separate expression systems and several different cultured mammalian cell preparations. Overall, DW13.3 potently blocked all native calcium channel currents studied, with the exception of T-type currents recorded from GH3 cells. Examination of transiently expressed calcium channels in oocytes showed that DW13.3 had the highest affinity for alpha1A, followed by alpha1B > alpha1C > alpha1E. The affinity of DW13.3 for alpha1B N-type currents varied by 10-fold between expressed channels and native currents. Although block occurred in a similar 1:1 manner for all subtypes, DW13.3 produced a partial block of both alpha1A currents and P-type currents in cerebellar Purkinje cells. Selective occlusion of the P/Q-type channel ligand omega-conotoxin MVIIC (but not omega-agatoxin IVA) from its binding site in Purkinje neurons suggests that DW13.3 binds to a site close to the pore of the channel. The inhibition of different subtypes of calcium channels by DW13.3 reflects a common "macro" binding site present on all calcium channels except T-type.     

Polyphosphoinositide synthesis in human neutrophils. Effects of a low metabolic energy state

Phosphatidylinositol (PtdIns) synthesis and polyphosphoinositide (PPI) formation were measured as the incorporation of [32P]orthophosphate ([32P]Pi) or [3H]inositol into non-stimulated intact human neutrophil membrane phospholipids. The rate of PtdIns "de novo" synthesis appeared to be a slow mechanism when compared to the rapid incorporation of [32P]Pi into PPIs. Of the "de novo" synthesized [3H]PtdIns, 70% was further phosphorylated to PPI. Nevertheless, this PPI pool represented less than 0.01% of the total nmols of PPIs formed evaluated as [32P]Pi labeling, indicating that PPI formation mainly involves a no "de novo" synthesized phosphatidylinositol pool. When evaluated at short incubation times, oscillations in the formation of PPIs were detected. A rapid phase was characterized after 30 s of incubation with [32P]Pi Phosphorylation levels returned to an equilibrium state within a minute, and the second phase peaked at 5 min., returning to equilibrium at 15 min. The fluctuant kinetics though not the equilibrium level of PPI formation, could be abolished by neomycin. On the other hand, a selective inhibition of the rapid phase of PPI synthesis occurred in the presence of the tyrosine kinase inhibitor genistein. When the incorporations of [gamma-32P]-adenosine triphosphate (ATP) or [32P]Pi into human neutrophil particulate fraction membranes were evaluated, PPIs synthesis showed fluctuations independently of the precursor used. Noticeably, [32P]from [32P]Pi was incorporated more efficiently into PPIs than that from [gamma-32P]ATP, when evaluated in parallel using equal specific activities for both radiolabeled precursors and under non-ATP synthesizing conditions. Moreover, the incorporation of [32P]Pi into particulate fraction PPIs was not abolished by high concentrations of non-radiolabeled ATP, and metabolically inhibited PMNs showed high rates of PPI synthesis. These data suggest that PPI formation is not necessarily a futile cycle in PMNs.     

Fetal heart rate patterns in postasphyxiated fetal lambs with brain damage

OBJECTIVE: We previously showed that in asphyxiated fetal lambs the duration of hypotension correlated well with the severity of histologic damage to the brain, whereas the duration of bradycardia did not. This study compares fetal heart rate patterns with the degree of histologic damage to the brain. STUDY DESIGN: Twelve chronically instrumented near-term fetal lambs were subjected to asphyxia by umbilical cord occlusion until fetal arterial pH was <6. 9 and base excess was <-20 mEq/L. An additional 4 fetuses served as sham-asphyxia controls. Fetal heart rate (from electrocardiogram), arterial blood pressure, fetal breathing movements, and electrocorticogram were continuously monitored before, during, and for 72 hours after asphyxia. Fetal brain histologic features were categorized as mild (group 1, n = 5), moderate (group 2, n = 4), and severe (group 3, n = 3). Long-term fetal heart rate variability expressed as amplitude range was assessed visually every 5 minutes from 30 minutes before asphyxia until 2 hours of recovery and at 6, 12, 24, 48, and 72 hours of recovery. RESULTS: Long-term fetal heart rate variability amplitude decreased from 32 +/- 17 beats/min (mean +/- SEM) preocclusion to 4 +/- 13 beats/min at the end of occlusion (P <.001) without significant differences among the 3 groups. During 10 to 45 minutes of recovery, the long-term variability of group 1 was significantly greater than that of groups 2 and 3. At 24 to 72 hours of recovery, the long-term variability of groups 1 and 2 was significantly higher than that of group 3, which was almost 0. The "checkmark" and sinusoidal fetal heart rate patterns were observed during the recovery period in groups 2 and 3. CONCLUSIONS: Decreased long-term fetal heart rate variability and the "checkmark" and sinusoidal fetal heart rate patterns were indicators of the severity of asphyxial histologic damage in the fetal brain.     

Treatment of articular cartilage defects of the knee with autologous chondrocyte implantation

alpha 1-Adrenergic receptor-mediated responses are overwhelming in adult rat hepatocytes. Inversely, beta-responses are predominant over alpha 1-responses in the hepatocytes that have been cultured at a low cell density (10(4) cells/cm2) for 24 h. The insulin-EGF-induced DNA synthesis in the beta-response-dominant hepatocytes was doubled by beta-agonists or cAMP-generating agents added far behind (16-20 h) the addition of insulin/EGF; i.e., immediately before the entry into the S-phase of the cell cycle. Agonists of alpha 1-adrenergic or other Ca2+, mobilising receptors added to the alpha 1-response-dominant hepatocytes increased DNA synthesis only if they were added within 1-2 h after the addition of insulin/EGF, at the early stage of G1-phase. Agonists of "non-dominant" receptors were rather antagonistic to agonists of "dominant" receptors. Thus, agonists of alpha 1-adrenergic (and other Ca2+ mobilising) receptors and agonists of beta-adrenergic (and other cAMP-generating) receptors acted as comitogens in their own particular manners in the presence of growth factors in hepatocytes in which the respective receptor functions were dominant.