Modification of fast-cure ethylene–propylene diene terpolymer rubber by maleic anhydride and effect of electron donor

Grafting of maleic anhydride (MA) onto fast-cure ethylene–propylene diene terpolymer rubber was studied. The effect of the amount of the MA, initiator (dicumyl peroxide), and electron donor (stearamide) on graft content are described. The potentiometric method and Fourier transform infrared spectroscopy are used to obtained the graft content. The stearamide suppresses the side reactions, such as crosslinking and chain scission. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 1–5, 1998     

Biogenic Amine Contents in Non-alcoholic Beers: Screening and Optimization of Derivatization

A rapid, sensitive, and reproducible high-performance liquid chromatographic procedure for the determination of nine biogenic amines in non-alcoholic beers was developed by an optimized benzoylation procedure. A Plackett–Burman factorial design was used in order to screen the statistically significant variables. The significant factors of biogenic amine benzoylation, reagent volume and pH, were optimized by a complete factorial response surface design, and optimal reaction conditions were generated. The optimized method showed good linearity (correlation coefficients > 0.997) and good recoveries (from 88.6 to 104.7 %). The repeatability and reproducibility of method were >3.9 and >4.6 %, respectively. Moreover, the detection limits of biogenic amines were calculated between 0.05 and 0.15 μg/ml in wine samples. The optimized method has been applied to the determination of biogenic amine contents of non-alcoholic beers consumed in Iran. Their values ranged from 0 to 2.56 mg/l, no significant differences (p?>?0.05) were observed between the analyzed samples, and none of these samples surpass the toxic levels reported in the literature.     

Theoretical calculation simulation studies of ABV nuclear reactor coupled with desalination system

In this paper, research has been conducted on the floating type nuclear power plant named as ABV reactor which is designed for district heating, power, and sea water desalination by OKBM facility at Russia. This reactor was tested under different thermal loads during the designing phase, and three modules have been investigated. Theoretical calculations and simulation studies have been performed on these three modules having specifications as ABV‐6M with 47MW_th, ABV‐6 with 38MW_th, and ABV‐3 with 18MW_th.The results obtained from these modules have been calculated mathematically and verified by simulation. We have compared the originally derived data of ABV desalination system with our theoretical and simulation analysis. The results from two desalination techniques including RO and RO + MED have been calculated and are presented in this paper with details. The results obtained from both analysis show that the efficiency of ABV nuclear reactor desalination system increases with the decrease in corresponding water cost ratio. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical investigation of plasma dynamical behavior and halo current analysis

In this paper, a novel system has been developed for plasma disruption conditions followed by downward vertical displacement. During the disruption, size and orientation of plasma decreases, which gives the halo current circulated around each contacting point in radial as well as in poloidal directions. Therefore, a new mathematical model has been developed, which gives the interaction forces of halo current, vertical, and radial plasma dynamical behavior (linear and nonlinear). This theoretical approach showed that the tokamak plasma has two connecting points in order to distinguish between the stable and unstable position. This model can particularly give the magnetic field change points and changing of flux, which are more convenient in order to discuss the static and tilting position of plasma behavior. Numerical techniques have been calculated in terms of plasma dynamical behavior, that is, Electromagnetic/plasma, Vertical Displacement Event (VDE) stages, and initial interaction between the forces under specific time interval. The objective of the research is to developed theoretical and computational model in order to investigate the dynamical behavior of plasma under disruption conditions. This is the novel method, and no work has been reported so far. Copyright © 2015 John Wiley & Sons, Ltd.     

Dynamic mechanical study of epoxy,epoxy/glass,and glass/epoxy/wood hybrid composites aged in various media

It was proposed and subsequently established that wrapping of red oak wood crossties with epoxy impregnated glass fiber composites will impart longer service life and better stiffness and strength characteristics to these hybrid ties than conventional ones and will help them better withstand environmental extremes. The objective was to understand the degrading effects of aqueous (distilled water), saline (NaCl), acidic (HCl), and alkaline (NaOH) solutions, as well as accelerated aging and freeze/thaw cycling environments on the dynamic and static mechanical properties of these hybrid materials (i.e., wood, wrapped with fiber reinforced resin) and their components. Also micrographs of composite samples, obtained through scanning electron microscopy (SEM), were studied to determine the failure mechanism of composite specimens aged in different environments. Results showed that immersion in aging media lowered the glass transition temperature (T_g) and enhanced apparent phase separation in the samples because of polymer plasticization. In water immersion, the T_g and the stiffness increased with time owing to continued resin curing. At ambient temperature, sustained load had little effect on the mechanical behavior of the aged samples. The extent of degradation was the least for samples aged in salt solution. Soaking in room‐temperature acid solution was most damaging to pure red oak wood samples. Six‐cycle aging did not damage the neat resin or the hybrid samples, whereas it damaged pure wood specimens. Therefore, the composite wrapping around the wood core of the hybrid sample protected it sufficiently, thereby preventing damage to the hybrid specimen during the aging process. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

A new approach to investigate scratch morphology and appearance of an automotive coating containing nano-SiO2 and polysiloxane additives

Attempts have been carried out to verify whether gonio-spectrophotometry could be utilized as a new scratch testing approach to investigate scratch morphology and its effect on appearance of an acrylic-melamine clearcoat separately containing nano-silica or polysiloxane additives. The results of gonio-spectrophotometry/colorimetry illustrated that this new approach is capable of differentiating between plastic and fracture types scratches. Furthermore, this approach was found to be suitable for analyzing the self healing abilities of such coatings. The accuracy and reproducibility of such results were checked against the results of scanning electron microscope (SEM) and illustrated great potential as a new approach for such studies.     

Kinetics of Dehydration of Green Alfalfa

ABSTRACT

Artificial drying is an important step in processing of green crops in order to preserve their freshness and nutrients for longer time at relatively lower costs. Forage crops, tea and tobacco are the major green crops where the commercial drying is a major operation in their processing. Fresh green alfalfa at about 75 to 80% moisture is subjected to drying in different types of dryers.ln the case of alfalfa, the raw material consists of leaves, stems, chops and fine stems, each varying distinctly in their physical and structural characteristics. The moisture content is reduced from initial level to about 10%. The drying air temperatures range from 40 b 800°C; the lower temperatures are used inconveyor dryers whereas high temperatures are used in rotary drum drycn.The results on drying behavior, and changes in physico-chemical propedes during drying for components of green alfalfa over the temperature range of 40 m 800°C are presented in this paper. The optimum temperature for drying from the stand point of color and protein solubility was found to be 175°C.     

Production of propionic acid in a fermented dairy beverage

A dairy beverage containing propionic acid was produced using the adjunct starter cultures with Lactobacillus acidophilus and Propionibacterium freudenreichii ssp. shermanii. The impacts of temperature (30, 35 and 40 °C) and inoculation ratio (1:2, 1:4 and 1:8) on propionic acid production and viability of micro‐organisms were studied. The incubation temperature had a significant adverse (P < 0.05) effect on the viability of P. freudenreichii and propionic acid production. Maximum amount of produced propionic acid (in 1:4–30 °C treatment) was 0.77%w/w. P. freudenreichii and L. acidophilus counts remained high (9 × 10⁶ and 1.5 × 10⁶ cfu/mL, respectively) after cold storage.