3-dimensional numerical analysis of friction stir welding of copper and aluminum

Journal of Mechanical Science and Technology - A time dependent Eulerian thermal/material flow model of friction stir welding was developed and applied to the dissimilar joining of pure copper and...     

Prediction of Uniaxial Compressive Strength of Underground Formations From Sonic Log Parameters

Selecting the most appropriate bit for any hole section is the key feature in achieving superior drilling performance. This feature has an enormous influence on the optimized performance of drilling and also economically affects the process greatly. The most important factor to correctly select a bit is formation physical characteristics, mainly rock compressive strength. Different sources can be used to obtain rock strength along the wellbore, such as logs, cutting and rock mechanical test, or even drilling data. The use of empirical correlations based on logs is often the only way to estimate strength in many situations due to the absence of cores for laboratory tests. In this study, one of the Iranian oil fields was selected to be analyzed. The goal was calculating the compressive strength from sonic log parameters. In order to develop an exponential correlation, log, drilling data, and backward simulation were used. Log data included sonic, neutron, density, and gamma ray logs. The correlation developed is applicable to determine the quantity of compressive strength of underground formations in absence of cores.     

The Development of a New Sonic Correlation for UCS Estimation from Drilling Data

Abstract

One of the most important characteristics of rocks in drilling operations is unconfined rock strength (UCS), which is critical in different aspects of drilling operations. Several laboratory-based correlations have been generated for specific rocks to estimate UCS from physical properties (such as transient time, porosity, and Young's modulus) of the rocks. In drilling analysis, when UCS information is required and direct methods for estimation of UCS are not available, it is common to use correlations that have been developed for other formations with the same or similar lithology. Obviously, the results of estimations based on UCS correlations for other formations will not be accurate and can affect subsequent analyses. Therefore, it is highly recommended to generate a correlation for the formation of interest, though it is not always possible to reach this goal from experimental works on core samples retrieved from the formation.

In this study, a sonic correlation that shows that it can provide relatively better global estimation of UCS for limestone rocks is modified for one of the Iranian carbonate formations by determining new coefficients for the correlation based on drilling data. For this purpose, the drilling information recorded in mud logging data is analyzed to backward simulate the drilling process based on a modified penetration rate model and calculate the rock strengths of the formation. The apparent rock strength log generated from this calculation proceeds quality-controlled steps according to statistical and pattern recognition methods to eliminate the noises and fluctuations that normally exist while working with field data. Then, a new correlation is developed from the formation response to sonic logs and apparent rock strength log. Because this new correlation is originally generated for the formation of interest, UCS is estimated more accurately and analyses dependent on UCS show fewer errors.     

Rheology, morphology and tensile properties of reactive compatibilized polyethylene/polystyrene blends via Friedel–Crafts alkylation reaction

Attempts were made to study the effect of reactive compatibilization via Friedel?CCrafts alkylation reaction, using AlCl₃ as a catalyst, on rheology, morphology, and mechanical properties of polyethylene/polystyrene (PE/PS) blends. The results of linear viscoelastic measurements in conjunction with the results of the mixing torque variation indicated that PS showed much more degradation than that of PE in the presence of AlCl₃. It was also found that while for PE-rich blends, the viscosity, and storage modulus increased by reactive compatibilization, they decreased for PS-rich blends. The variation of viscosity and storage modulus for 50/50 blend was found to be dependent on frequency ranges showing the competitive effects of PE?Cg?CPS copolymer formation and PS degradation. The results of morphological studies showed that reactive compatibilization decreased the particle size and particle-size distribution broadness because of in situ graft copolymer formation. Reactive compatibilization enhanced the tensile strength and elongation at break for PE-rich blends. It was demonstrated that there is a close interrelationship between rheology, morphology, and mechanical properties of reactive compatiblized PE/PS blends. It was also demonstrated that rheological behaviors have a reliable sensitivity to follow the structural and morphological changes during compatibilization process, so that, those information can be used to predict the morphology as well as mechanical properties of the blends.     

Improving performance in delay/disruption tolerant networks through passive relay points

In this paper, we study the case of a limited number of mobile nodes trying to communicate in a large geographic area, forming a delay/disruption tolerant network (DTN). In such networks the mobile nodes are disconnected for significantly long periods of time. Traditional routing protocols proposed for mobile ad hoc networks or mesh networks, which assume at least one path between each source and destination, are ineffective in DTNs. One approach to improve communication is through gossip based protocols because these protocols do not rely on a fixed path. Another approach is to control the movement of the mobile nodes and/or use special mobile nodes called ferry nodes. Others try to employ a fixed infrastructure including stationary relay points. One scheme in stationary relay point approach is to use base stations as relay points which need their own power supply. In this paper, we study a passive approach where mobile nodes deposit/retrieve messages to/ from known stationary locations in the geographic region. Messages are delivered from a source by being deposited at one or more locations that are later visited by the destination. A proposed implementation of our approach using read/writable passive Radio Frequency Identification (RFID) tags, one per point location, is considered in this work. Passive RFID technology is desirable because it operates wirelessly and without the need for attached power. Our simulation results indicate that our approach can achieve competitive message delay and delivery rates. We also demonstrate several techniques for optimizing the stationary relay node placement, namely relay pruning, probability based relay distribution and a genetic algorithm; the genetic algorithm is shown to provide the best solutions to this problem.     

Co-liquefaction of swine manure with waste vegetable oil for enhanced bio-oil production

Waste vegetable oil was co-liquefied with swine manure to determine the bio-oil potential in this study. The result shows that co-liquefaction of waste vegetable oil with swine manure can improve the bio-oil production and decarboxylation of waste vegetable oil. The weight ratio of swine manure to waste vegetable oil exerted a great effect on both the yield and quality of the bio-oil. The optimum weight ratio of swine manure to waste cooking oil was 1:3, where a maximum oil yield of 80% was obtained with higher calorific value up to 38 MJ/kg.     

ANALYSIS OF A GEODESIC DOME SOLAR FRUIT DRYER

This paper analyzes use of geodesic domes as low cost and practical solar energy drying systems, especially for developing countries. A geodesic dome solar fruit dryer was designed, constructed and tested for drying grapes. The structure was constructed using wooden members, covered with transparent tedlar plastic and a black absorber inner shell. Fresh air is heated in the space between the outer shell and the absorber sheet. The hot air then passes through the fruits on the trays and exits from the top. The dryer was tested for drying grapes under two different modes, namely natural convection and forced air flow. In addition, theoretical results were obtained by thermal-electrical simulation and considering the heat and mass transfer phenomena between the air and the grapes.     

An investigation on the role of GMA grafting degree on the efficiency of PET/PP-<Emphasis Type="Italic">g</Emphasis>-GMA reactive blending: morphology and mechanical properties

Glycidyl methacrylate (GMA) has been grafted on polypropylene (PP) with the aid of styrene (St) comonomer, by changing dicumyl peroxide initiator content, GMA level, and St concentration. The performance of the resulting PP-g-GMA reactive material towards static and dynamic mechanical properties of poly (ethylene terephthalate) (PET) was monitored in terms of grafting reaction variables and compatibilizer content. Fourier transform infrared spectroscopy, scanning electron microscopy, mechanical properties, melt flow rate, and impact strength analyses were applied to correlate structural changes due to grafting (or undesired chain scission) with blends’ properties. The competition between the desired reaction, i.e., GMA grafting onto PP chain, and undesired chain scission of PP macroradicals due to thermal degradation, was discussed based on torque–time curves and mechanical properties. Manipulation of grafting variables was responsible for a special behavior over properties, means that optimal or ascending/descending trends, which noticed high sensitivity of PET toughening to GMA grafting efficiency.