Citywide: Supporting Interactive Digital Experiences Across Physical Space

The Citywide project is exploring ways in which technology can provide people with rich and engaging digital experiences as they move through physical space, including historical experiences, performances and games. This paper describes some initial results and experiences with this project based upon two prototype demonstrators. In the first, we describe an application in which a search party explores an archaeological site, uncovering enacted scenes within the virtual world that are of a historical relevance to their particular physical location. In the second, we describe a museum experience where participants explore an outdoors location, hunting for buried virtual artifacts that they then bring back to a museum for a more detailed study. Our demonstrators employ a varied set of devices, including mobile wireless interfaces for locating hotspots of virtual activity when outdoors, to give different experiences of the virtual world depending upon location, task, available equipment and accuracy of tracking. We conclude by discussing some of the potential advantages of using an underlying shared virtual world to support interactive experiences across extended physical settings.     

Effect of Niobium on Microstructure of Cast AISI H13 Hot Work Tool Steel

The effect of niobium addition on the microstructure of cast AISI H13 hot work tool steel was evaluated by using EDX analyzer attached to the scanning electron microscope. The volume percent of eutectic area and eutectic cell size and also volume percent of different carbides of new steel, which is heat treated under different conditions, are also determined. The results show that the a niobium addition modifies the cast structure of Nb-alloyed hot work tool steel, and reduces the size and volume of eutectic cells, and increases the maximum hardness of the steel.     

Uncertainty based distributed generation expansion planning in electricity markets

Decision making under uncertainty is a difficult task in most areas. The distributed generation expansion planning is certainly one of the problems where it is difficult to find an optimal solution for, due to the existence of various uncertain parameters that affect the optimal solution. This paper presents a distributed generation planning strategy based on the multi-objective decision making (MODM) approach under uncertainties. The proposed strategy achieves a Pareto set of locations, sizes, and typical types, for new DG installations in a case-study power network (as the result of a multi-objective optimization). The technical constraints of DG units are also considered in the MODM process. The effects of the uncertain parameters on choosing the best plan(s) are considered using robustness, flexibility, and risk exposure attributes. This aim is performed based on a composite index which is weighted sum of the three mentioned attributes. This paper considers four categories of uncertain parameters including the peak loading factor, electricity market price, and investment and operating costs for the DG long-term planning.     

Attitude of Iranian physicians and nurses toward a clinical decision support system for pulmonary embolism and deep vein thrombosis

This research project sought to design and implement a computerized clinical decision support system (CDSS) that was able to identify patients who were at risk of pulmonary embolism (PE) and deep vein thrombosis (DVT), as well as produce reminders for prophylactic action for these diseases. The main purpose of the CDSS was to attempt to reduce the morbidity and mortality caused by embolism and thrombosis in patients admitted to hospitals. After implementation of this system in one of the large educational hospitals of Iran, a standard questionnaire was used, and interviews were conducted with physicians and nurses to evaluate the performance of the designed system for reducing the incidence of pulmonary embolism and thrombosis. From physicians and nurses’ point of view, a system which assists the medical staff in making better decisions regarding patient care, and also reminds pulmonary embolism and thrombosis preventive procedures with timely warnings, can influence patient care quality improvement and lead to the improved performance of the medical staff in preventing the incidence of pulmonary embolism and thrombosis.     

High Input Impedance NMOS-based Phase Shifter with Minimum Number of Passive Elements

In this paper, a new voltage-mode (VM) first-order phase shifter (all-pass filter) employing only four NMOS transistors and minimum number of passive elements (i.e. one resistor and one capacitor) is proposed. The proposed VM phase shifter has high input impedance and does not require passive element matching constraints. Moreover, since only two NMOS transistors are stacked between positive and negative supply voltages, the proposed circuit is suitable for low-voltage operation. Electronic tunability can be provided easily by replacing the employed resistor with an NMOS transistor operating in triode region. Simulation results based on 0.18 μm TSMC CMOS parameters with ±0.9 V supply voltages are given to demonstrate the performance of the proposed phase shifter.     

Numerical simulation and optimization of steam-assisted gravity drainage with temperature,rate, and well distance control using an efficient hybrid optimization technique

Steam-assisted gravity drainage (SAGD) is a thermal enhanced oil recovery technique through drilling of two horizontal wells. Effects of steam injection temperature, well rates, and their distance on oil recovery were analyzed and optimized. Steam temperature and well distances remarkably affect SAGD performance. Four metaheuristic algorithms (particle swarm optimization (PSO), imperialist competitive algorithm, cultural algorithm, and Bees algorithm) and pattern search optimization algorithm (PSA) are used for optimization. PSO performs better than other metaheuristics and PSA is the fastest one, while it is probable to be trapped in local optimums. Hybrid PSO-PS is proposed that starts with PSO and proceeds with PSA, and tested in an SAGD project and showed excellence over other techniques.     

Effect of parameters on roll dynamic response of an articulated vehicle carrying liquids

Directional response and roll stability characteristics of a partly filled tractor semi-trailer vehicle, with cylindrical tank, under different parameters and conditions are investigated. The effective parameters and conditions in the stability of a tractor semi-trailer carrying liquid can be considered as filled volume, kinematic viscosity of liquid cargo and vehicle steering input. The dynamic interaction of liquid cargo with the tractor semi-trailer vehicle is evaluated by integrating a dynamic slosh model of the partly filled tank with five-degrees-offreedom of a tractor semi-trailer tank model. The dynamic fluid slosh within the tank is modeled using three-dimensional Navier-Stokes equations, coupled with the volume-of-fluid equations and analyzed using FLUENT software. The coupled tank-vehicle model is subsequently analyzed to determine the roll stability characteristics for different conditions and maneuvers. The results show effects of parameter variations on roll stability of the vehicle carrying liquid and also fluid’s behavior in interaction with a vehicle’s dynamics.     

Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.