Suppressive effect of corticosteroids on the gene expression of interleukin-5 and eosinophil activation in asthmatics

Although cortico steroids are effective anti-inflammatory agents in ameliorating asthma symptoms and bronchial hperreactivity, their mechanism of action is unknown. Interleukin (IL)-5 is known to play a key role in regulating eosinophil proliferation and activation. Therefore, we examined the changes of IL-5 mRNA expressions in PBMC semi-quantitatively with RT-PCR as well as serum ECP levels and MCH-PC20 values in asthmatics before and after being treated with corticosteroids. The results revealed that there were significant decrease in the level of IL-5 mRNA and serum ECP concentration after therapy (P < 0.05) and there was remarkable improvement in the values of MCH-PC20 and FEV1% (P < 0.05). It was also found that the changes of serum ECP levels or MCH-PC20 values were accompanied by a reduction in IL-5 mRNA expression (r = 0.5426 or 0.4857, P < 0.05). These results suggested that the therapeutic effects of corticosteroids in asthma may result from modulation of IL-5 gene expression with consequent inhibition of eosinophil activation.     

威海市污水处理深海排放工程的设计

威海市污水处理深海排放工程是为改善其水域环境而建设的一英包括市区排水系统，污水预处理厂，输水管道和海洋放流管系统在内的完整而典型的工程，因此其工程设计扣的经验将会对同类项目的设计与工程建设有所借鉴。     

A Linear Cross-Coupled Control System for High-Speed Machining

We present a linear cross-coupled controller to improve highspeed contouring accuracy independently of tracking accuracy in a biaxial machine tool feed drive servomechanism. Unlike conventional cross-coupled controllers, the cross-coupled controller presented here is a linear system, so it is very easy to perform the stability and steady-state error analysis, and to optimise the controller parameters. The proposed controller is evaluated experimentally on a CNC LOM machine and compared to an uncoupled controller and a conventional cross-coupled controller. Controller performance is evaluated for a circular contour at a feedrate of 30 m min _1 . The experimental results show that the proposed controller can greatly reduce the contour error at large feedrates. The linear cross-coupled controller is simple to implement and is practical.     

光纤检漏系统

本文介绍一种新型的光纤检漏系统,通过对待测件内气体状态分析,确定采用比较法充压检漏技术和先进的光纤技术,研制成既具有高检测灵敏度又稳定可靠的检漏系统。该系统已成功地用于工业生产中,对水库大坝仪器实现了在线充压检漏,保证产品质量。     

既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

点阴极电场辅助阳极连接中的紧密接触面积和电流

用等效电路的方法研究了点阴极情况下的电场辅助阳极连接效应，计算了连接电流，连接孕育期和紧密接触面积，本文结果表明，连接初期电流迅速衰减，随后缓慢变小，直至某一稳定值，孕育期随温度上升指数下降，连接温度高时，孕育期将难以观察到；待连接表面之间紧密接触面积随时间延长而非线性扩展，紧密接触区域增大时，其边界向外推进速度渐小，而接触面积增加渐快。     

二氧化碳增油技术在孤岛油田的应用

介绍了二氧化碳增油机理和二氧化碳增油技术在孤岛油田的应用情况。现场应用表明 ,二氧化碳非混相驱油是封闭小断块油田的有效增产措施 ,二氧化碳酸化 (压裂 )助排能起到缩短排液时间 ,保护油气层的作用     

水力喷射径向水平井生产管的工艺评定与检验

在URRS系统施工过程中 ,生产管处于多种变化复杂的应力和变形状态下 ,若出现失稳、渗漏、刺穿和断裂等事故 ,将造成巨大经济损失。为此 ,开展了水力喷射径向水平井用生产管的焊接方法、焊接设备、焊接工艺过程和焊接接头力学性能评定方法的试验研究。通过研究和试验 ,管材基本上实现了国产化 ,与之相匹配的焊接材料、焊接工艺以及质量检测技术已基本配套和规范化 ,形成了一套稳定的、可靠性较高且能完全满足现场工况的施工体系和质量保证体系     

Theory and design of a tapered line distributed photodetector

We present the theory and design of a tapered line distributed photodetector (TLDP). In the previously demonstrated velocity-matched distributed photodetector (VMDP), high electrical bandwidth is achieved by proper termination in the input end to absorb reverse traveling waves, sacrificing one-half of the quantum efficiency. By utilizing the tapered line structure and phase matching between optical waves and microwaves in our analyzed structure, a traveling-wave photodetector is more realizable and ultrahigh bandwidth can be attained due to removal of the extra input dummy load that sacrifices one-half of the total quantum efficiency. To investigate the advantages of TLDP over VMDP, we calculate their electrical bandwidth performances by using an analytic photodistributed current model. We adopted low-temperature-grown (LTG) GaAs-based metal-semiconductor-metal (MSM) traveling-wave photodetectors as example unit active devices in the analytic bandwidth calculation for their high-speed and high-power performances. Both VMDP and TLDP in our simulation are assumed to be transferred onto glass substrates, which would achieve high microwave velocity/impedance and make radiation loss negligible. The simulated bandwidth of a properly designed LTG GaAs MSM TLDP is /spl sim/325 GHz, which is higher than the simulated bandwidth of the LTG GaAs MSM VMDP with an open-circuit input end (/spl sim/240 GHz) and is almost comparable to the simulated bandwidth of an input-terminated LTG GaAs MSM VMDP (/spl sim/330 GHz). This proposed method can be applied to the design of high-bandwidth distributed photodetectors for radio-frequency photonic systems and optoelectronic generation of high-power microwaves and millimeter waves.