Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Three-dimensional scanner of a pipe with tilt detection

The 3D quantitative measurement system for a sewer pipe is introduced. Two parallel lasers are rotated by the motor and draw the two annular streaks on the inside surface of the pipe. The circular laser streaks are recorded by the CCD camera. The measurement of the cross-section is established by analyzing the recorded streaks. The tilt of the robot against the axis of the pipe is detected by the deviation between two parallel lasers. It enables us to measure the vertical cross section of the pipe regardless the tilt of the system to the pipe. Experimental result shows the feasibility of the system. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Gradually intractable problems and nondeterministic log-space lower bounds

The paper places five different problems (thek-pebble game problem, two problems aboutk finite automata, the reachability problem for Petri nets withk tokens, and the teachability problem for graphs whose k-dimensional edge sets are described by Cartesian products ofk factors) into the hierarchyNL _k of problems solvable by nondeterministic Turing machines ink-log₂ n space (and binary tape alphabet, to avoid tape speed-up). The results, when combined with the conjecture thatNL _i contains problems that requireO(n ^k ) deterministic time, show that these problems, while inP for every fixed value ofk, have polynomial deterministic time complexities with the degree of the polynomial growing linearly with the parameterk, and hence are, in this sense, gradually intractable.     

Imitating others by composition of primitive actions: A neuro-dynamic model

This paper introduces a novel neuro-dynamical model that accounts for possible mechanisms of action imitation and learning. It is considered that imitation learning requires at least two classes of generalization. One is generalization over sensory–motor trajectory variances, and the other class is on cognitive level which concerns on more qualitative understanding of compositional actions by own and others which do not necessarily depend on exact trajectories. This paper describes a possible model dealing with these classes of generalization by focusing on the problem of action compositionality. The model was evaluated in the experiments using a small humanoid robot. The robot was trained with a set of different actions concerning object manipulations which can be decomposed into sequences of action primitives. Then the robot was asked to imitate a novel compositional action demonstrated by a human subject which are composed from prior-learned action primitives. The results showed that the novel action can be successfully imitated by decomposing and composing it with the primitives by means of organizing unified intentional representation hosted by mirror neurons even though the trajectory-level appearance is different between the ones of observed and those of self-generated.     

Morphological characteristics of flood refugia of cobble-bed vegetation

Periodic flooding alters riverine vegetation community composition; moderate flood disturbance maintains communities at an early seral stage, whereas severe floods may remove entire communities. After disturbance, plants may recolonize riverbeds from refugia.Here, we investigated the morphological characteristics of refugia where riverine plants survived large floods. At three sites, plant communities growing on cobble-bars were surveyed, and the hydraulic characteristics of each site were analyzed. The populations of an indicator plant, Anaphalis margaritacea sub-species yedoensis (Franch. et Savat.) were assessed after major floods in 2004 and 2009. At each survey, the particle size and bed composition were measured, and the critical shear-stress required to move particles at each site was calculated. A one-dimensional flow and the average and local shear-stress at ten different discharges, including that of the largest flood were calculated. The results demonstrate that the A. margaritacea community is maintained at locations where the local shear-stress at peak discharge in large-floods does not exceed a critical value. These conditions were achieved in locations with particular morphological characteristics, where the river is not constrained by levees and is restricted by a downstream narrow-pass; in this reach river width increases with discharge thus limiting the increase in water depth with increasing discharge and allowing the establishment of refugia where plant species may survive large floods.Flooding and reestablishment from refugia maintain a characteristic riverbed community in equilibrium.     

Structure,transport properties,and dielectric properties of lactic acid/pyruvic acid aqueous solution in a biofuel cell: A molecular simulation study

Molecular dynamics (MD) simulation of lactic acid (L‐acid) and pyruvic acid (P‐acid) in a physiological salt solution has been performed, which is used as the electrolyte in a sort of biofuel cell working on a human skin. The structure, frequency distribution of molecules, dielectric properties, rotational correlation functions, and diffusion coefficients have been calculated. The anomalous behavior of dielectric constants for the lower concentration of L‐acid and P‐acid has been obtained from MD. The anomalous dielectric constant is discussed in relation with the various physical properties of the solution including the life time of the interaction in the solution. MD results suggest that the anomalous behavior is supposed to be attributed to the difference of interactions between ions in the lower and higher concentration region. POLYM. ENG. SCI., 59:2474–2478, 2019. © 2019 Society of Plastics Engineers     

Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.     

Lamellar eutectic growth with anisotropic interphase boundaries: Experimental study using the rotating directional solidification method

We report on an experimental study of the effects of interphase boundary anisotropy on eutectic microstructures using a new methodology called rotating directional solidification (RDS), which consists of rotating a thin sample with respect to a fixed unidirectional thermal gradient. The systems used are thin, large eutectic grains of the CBr₄–C₂Cl₆ and In–In₂Bi lamellar eutectic alloys. The shape of the observed RDS lamellar trajectories turns out to be a reproducible eutectic-grain-dependent feature, in agreement with the theoretical prediction that these trajectories are approximately homothetic to the Wulff form of the interphase boundary in the sample plane. We show that different modes of lamellar growth, ranging from quasi-isotropic to (crystallographically) locked, exist in different eutectic grains of the two alloys studied. A detailed characterisation of these modes is given, with particular attention to the as-yet poorly understood aspects of locked lamellar growth.     

A theory of thin lamellar eutectic growth with anisotropic interphase boundaries

We present a semiempirical theory of the effects of an orientation dependence of the surface free energy of interphase boundaries (interphase boundary anisotropy) on lamellar eutectic growth in thin samples. We show that, to a good approximation, thin lamellar eutectic patterns with a strong interphase boundary anisotropy travel along the growth front at such a velocity – or, equivalently, at such an inclination angle of the lamellae left behind in the solid – that the surface tension force of the interphase boundary is nearly parallel to the applied thermal gradient. This explains, among other things, the crystallographic locking of lamellar eutectic patterns that occurs in those eutectic grains, which have cusp singularities in the Wulff plot of the interphase boundary. Based on this theory, we show that the rotating directional solidification method, by which a thin sample is rotated with respect to a fixed unidirectional thermal gradient, must yield eutectic lamellae whose trajectories are nearly homothetic to the two-dimensional Wulff form of the interphase boundary. This opens up new possibilities for the experimental study of interphase boundary anisotropy in eutectic alloys.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.