Double-walled reformer tubes using high-temperature thermal storage of molten-salt/MgO composite for solar cavity-type reformer

Composite materials with alkali carbonate and magnesia have been examined for high-temperature thermal storage in solar tubular reformers. The concept of a double-walled reactor tube involves packing a molten-salt/ceramic composite material into the annular region between internal catalyst tube and exterior solar-absorber wall. In this paper, the shape and interior structure of the reactor tube are newly designed for use in solar cavity-type reformers using straight reactor tubes. Na₂CO₃, K₂CO₃, and Li₂CO₃ composite materials with magnesia were tested as thermal storage media for CO₂ reforming of methane during cooling mode of the reactor tube at a laboratory scale. The efficiency of Na₂CO₃/MgO composite with various MgO contents was also estimated. Composite materials of Na₂CO₃ 80–90 wt% and MgO 20–10 wt% were successfully delayed the cooling of the catalyst bed and sustained methane conversion at >90%. A solar cavity-type reformer consisting of multiple straight reactor tubes is expected to enable stable operation of the solar reforming process under fluctuating solar insolation during cloud passage.     

Highly conductive, undoped ZnO thin films deposited by electron-cyclotron-resonance plasma sputtering on silica glass substrate

The electrical and optical properties of undoped ZnO films deposited by electron cyclotron resonance (ECR) plasma sputtering at room temperature were characterized. The lowest resistivity we achieved was 2.6 × 10^− 3 Ωcm with optical transmittance at visible wavelengths higher than 85%. The X-ray diffraction (002) peak was weak and the rocking curve was asymmetrical, indicating that oxygen vacancies prevented large crystalline domains from forming. At low argon-sputtering-gas pressure, carrier concentration and Hall mobility increased with increasing argon pressure. When the optimum pressure (40 mPa) was exceeded, however, Hall mobility and optical transmittance were severely reduced, which indicated that excess Zn atoms were populated at the interstitials of the network. Admitting only 0.67 mPa of O₂ gas during deposition deteriorated resistivity over 1 MΩcm due to high excitation efficiency in the ECR plasma. Deposition under a higher magnetic field produced lower resistivities.     

Analysis of time-dependent deformation of a CFRP mirror under hot and humid conditions

The long-term micro-dimensional stability of a carbon fiber reinforced plastic (CFRP) mirror was investigated in terms of creep deformation, moisture swelling and self-shrinkage. A 4-point bending creep test was carried out using specimens made from pitch-based high-modulus CFRP laminates to obtain a creep constant based on linear viscoelasticity, and we then investigated the weight change and geometrical change during a moisture absorption test using a CFRP specimen. The anisotropic diffusivities and coefficients of moisture expansion (CMEs) in CFRP laminates were obtained by fitting analytical data into the experimental data. Finally, the shrinkage behavior caused by physical aging of the polymeric material was examined using a fiber Bragg grating (FBG) sensor embedded in the neat resin specimen. Applying these results, we analyzed the geometrical changes in a CFRP mirror that resulted from time-dependent deformation by the mirror’s weight, moisture absorption and physical aging, respectively. We discuss which factor is dominant in the deformation of CFRP mirrors under various conditions.     

Detection of short tandem repeat (STR) polymorphisms by microchip electrophoresis for individual identification of cattle

A simple and rapid detection of short tandem repeat (STR) markers was studied as a screening test for individual identification of cattle. DNAs were extracted from eight commercial beef samples by a proteinase K-boil method followed by purification with 2-propanol precipitation. Five STR markers, known to be highly polymorphic, were amplified by PCR and analyzed both by a conventional sequencing analysis (SEQ) and by a proposed microchip electrophoresis (MEP). Every marker revealed high polymorphism, such as 5-9 alleles in SEQ analysis, and 4-6 alleles in MEP analysis. This simple and rapid MEP analysis is expected to be an effective screening tool with use of confirmatory SEQ analysis.     

Application of an absorption-based surface plasmon resonance principle to the development of SPR ammonium ion and enzyme sensors

Two new types of surface plasmon resonance (SPR) sensors that can determine the concentration of ammonium cations and urea were realized based on the previously reported theory of the absorption-based SPR measurement method. The change of the dielectric constant caused by the change of the light absorption characteristics of dyes incorporated in a sensing membrane phase is utilized in these SPR sensors. The determination of ions using the SPR sensor was realized by detecting the SPR signals of the minimum reflectance related to the change of absorption spectra of the dye in the ion optode membrane consisting of an ammonium-selective ionophore (TD19C6) and a lipophilic cationic dye (KD-M11) that shows absorption spectral changes due to protonation and deprotonation. A SPR enzyme sensor that can determine the concentration of urea was prepared by the combination of this ion optode membrane and an enzyme membrane based on urease. With the newly developed SPR sensors, the intensity changes of the reflectance at the fixed SPR resonance angle are monitored, which is different from conventional SPR sensors where usually the change of the SPR resonance angles is detected. In a continuous-flow experiment using the SPR ion sensor for NH4+ ion determination, a dynamic measurement range from 10(-5) to 10(-2) M was achieved. In the case of the enzyme-based SPR urea sensor, a dynamic range from 10(-4) to 10(-1) M was observed in a stopped-flow batch arrangement. It is expected that this sensing technique can be applied for the SPR-based detection of a wide range of low molecular weight analytes.     

Characterization of leakage current on diamond Schottky barrier diodes using thermionic-field emission modeling

A diamond vertical Schottky barrier diode (SBD) with nonepitaxial crystallites (NCs) exhibits high leakage current in both its forward and its reverse characteristics. A shunt path current through the grain boundary of the NCs is the dominant mechanism. The defectless device shows a low leakage current of less than 10^− 11 A/cm², and the device yield corresponds to the density of the NCs. The reverse leakage current of the defectless device increases with the reverse field. The leakage current of the diamond SBD is in good agreement with the tunneling model described by thermionic-field emission (TFE) rather than the conventionally used barrier-lowering model. The TFE current dominates when the reverse electric field is larger than 1.2 MV/cm, and current density reaches 10^− 6 A/cm², even at 1.6 MV/cm, which is lower than the avalanche limit.     

Mass screening for neuroblastoma at 6 months of age: difficult to justify

BACKGROUND/PURPOSE: A statistical analysis of the mass screening for neuroblastoma in Japan based on a population study rarely has been reported. This study aims to evaluate retrospectively the effectiveness of mass screening at 6 months of age using the available population data. METHODS: The data on the neuroblastoma cases registered by the Committee for Pediatric Solid Malignant Tumors in the Kyushu area were analyzed based on both screened and unscreened populations in the Kyushu area. RESULTS: From 1988 to 1992, the cumulative incidence of neuroblastoma in children less than 5 years of age was 82 in 484,599 for screened children, and 11 in 92,966 for unscreened children, respectively. Fourteen of the 82 screened patients had negative findings at 6 months of age (MS-negative cases). No significant difference was observed in the cumulative mortality rates from neuroblastoma in children younger than 5 years of age between the screened children and the unscreened children. Six of seven patients who died among the screened children were MS-negative cases with stage III or IV disease. In addition, no significant difference was found in the cumulative mortality rates from the neuroblastoma cases in patients less than 5 years of age between the children screened from 1988 to 1992 (7 of 484,599) and all children from 1980 to 1984 (14 of 668,084). CONCLUSIONS:These findings suggests that the majority of the patients detected by mass screening had a favorable prognosis, and, mass screening in Japan for children less than 6 months of age was not observed to reduce the incidence and mortality from neuroblastoma. Therefore, mass screening at 6 months of age was not found to improve substantially the prognosis of patients with unfavorable neuroblastoma identified over 1 year of age, which is the primary purpose of such mass screening for neuroblastoma.     

Development of a simulation program for estimating hospital incomes under the prospective payment system

A prospective payment system based on diagnosis procedure combination (DPC/PPS) was introduced to acute care hospitals in Japan in April 2003. In order to increase hospital income, hospitals must shorten the average length of stay (ALOS) and increase the number of patients. We constructed a simulation program for evaluating the relationships among ALOS, bed occupation rate (BOR) and hospital income of hospitals in which DPC/PPS has been introduced. This program can precisely evaluate the hospital income by regulating the ALOS and the number of patients for each DPC. By using this program, it is possible to predict the optimum ALOS and optimum number of inpatients for each DPC in order to increase hospital income.     

Characterisation of disulfide-bond dynamics in non-native states of lysozyme and its disulfide deletion mutants by NMR

This report describes NMR-spectroscopic investigations of the conformational dynamics of disulfide bonds in hen-egg-white lysozyme substitution mutants. The following four systems have been investigated: 2SS(alpha), a lysozyme variant that contains C64A, C76A, C80A and C94A substitutions, was studied in water at pH 2 and 3.8 and in urea (8 M, pH 2); 2SS(beta) lysozyme, which has C6S, C30A, C115A and C127A substitutions, was studied in water (pH 2) and urea (8 M, pH 2). The NMR analysis of heteronuclear 15N-relaxation rates shows that the barrier to disulfide-bond isomerisation can vary substantially in different lysozyme mutants and depends on the residual structure present in these states. The investigations reveal cooperativity in the modulation of micro- to millisecond dynamics that is due to the presence of multiple disulfide bridges in lysozyme. Mutation of cysteines in one of the two structural domains substantially diminishes the barrier to rotational isomerisation in the other domain. However, the interactions between hydrophobic clusters within and across the domains remains intact.     

Web-based delivery of medical multimedia contents using an MPEG-4 system

Moving picture expert group compression standard version 4 (MPEG-4) is a standard for video coding aimed at multimedia applications. MPEG-4 was developed to enable high compression rate in a low bitrate transmission via the Internet or mobile telecommunications. Although these characteristics of MPEG-4 are suitable for telemedicine, little is known about the possibility of using this technology in the field of telemedicine. We evaluated the quality of MPEG-4-encoded medical video streams and compared them with original analogue videos and audio-video-interleave (AVI) files. Although MPEG-4 video streams have the advantage of small file size, they were found to be inferior to original videos and AVI files in terms of smoothness of motion pictures, sharpness of images and clearness of sound. Illegibility of characters was a major problem in MPEG-4 files. The score for total impression of MPEG-4 files was significantly lower than those for AVI files. The results of this study suggest that the quality of MPEG-4-encoded video streams is not adequate for telemedicine.