A Water‐Soluble Mechanochromic Luminescent Pyrene Derivative Exhibiting Recovery of the Initial Photoluminescence Color in a High‐Humidity Environment

Switching of the luminescence properties of molecular materials in response to mechanical stimulation is of fundamental interest and also has a range of potential applications. Herein, a water‐soluble mechanochromic luminescent pyrene derivative having two hydrophilic dendrons is reported. This pyrene derivative is the first example of a mechanochromic luminescent organic compound that responds to relative humidity. Mechanical stimulation (grinding) of this pyrene derivative in the solid state results in a change of the photoluminescence from yellow to green. Subsequent exposure to water vapor induces recovery of the initial yellow photoluminescence. The color change is reversible through at least ten cycles. It is also demonstrated that this compound can be applied as a mechano‐sensing material in frictional wear testing for grease, owing to its immiscibility in non‐polar solvents and its non‐crystalline behavior. Transmission electron microscope and atomic force microscope observations of samples prepared from dilute aqueous solutions of the pyrene derivative on suitable substrates, together with dynamic light scattering measurements for the compound in aqueous solution, indicate that this amphiphilic dumbbell‐shaped molecule forms micelles in water.     

Effects of surface treatments of superdrawn polyoxymethylene fibers on adhesion to epoxy resins

Strong adhesion in the superdrawn polyoxymethylene (POM) fiber/epoxy matrix system was achieved with surface treatments, 2H-hexafluoro-2-propanol (HFP) treatment, and surface phenolation of the fiber. HFP produced micropits for mechanical interlocking with the matrix. Surface phenolation formed active layers leading to interfacial miscibility. © 1996 John Wiley & Sons, Inc.     

Experimental study of impingement cooling by heat sinks with thin longitudinal fins for LSI packages

This paper reports on the impingement cooling characteristics of a heat sink with thin longitudinal fins of 0.2 mm thickness, which are spaced with a fin-pitch in the range 0.5 mm to 2.0 mm. The air cooling of the heat sink comes from a slot-shaped orifice positioned above the heat-sink center. The breadth of the gap between the fin tops and the inlet orifice is in the range 0 mm to 10 mm. The thermal resistance of the thin longitudinal fins used is about 50% to 57% that of the thick longitudinal fins now in commercial use. The cooling performance of the thin-plate fins is almost the same as that of optimally arranged pin-fins with the same total surface area. A maximum value of six times the heat transfer rate of a single flat plate having the same base area was observed for the thin-plate fins. A comparison of cooling performance between impingement and channel flow systems was conducted. The performance of impingement cooling systems is almost unaffected by the breadth of the gap between the fin tops and the inlet orifice (or, for channel cooling, the upper wall). On the other hand, the performance of channel-cooling systems decreases significantly as the gap widens. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(7): 449–459, 1996     

Hydrogen and carbon dioxide adsorption with tetra‐n‐butyl ammonium semi‐clathrate hydrates for gas separations

Gas adsorption rates of H₂, CO₂, and H₂‐CO₂ gas mixture (H₂/CO₂ = 3.4) with tetra‐n‐butyl ammonium salt (bromide, chloride, and fluoride) semi‐clathrate hydrate particles were measured at 269 K to assess their properties for gas separation. Equilibrium gas occupancies in the S‐cages of the particles were in order of (high to low) for hexagonal structure‐I, tetragonal structure‐I, and superlattice of cubic structure‐I structures with the maximum fractional occupancy by CO₂ being about 40%. The CO₂ diffusion rate depended on the anion size of the salt, which is attributed to distortion of the S‐cage that is close to the molecular size of CO₂. Simulations of semi‐clathrate hydrate particles with theory showed that H₂/CO₂ selectivities could be as high as 36 (3.0 mol% TBAF) and that selectivities for an ideal membrane (3.3 mol% TBAF) could be >100 (269 K, 0.3–4.5 MPa). Semi‐clathrate hydrates have wide application as separation media for gas mixtures. © 2014 American Institute of Chemical Engineers AIChE J, 61: 992–1003, 2015     

Immobilization of glucose oxidase on nonwoven fabrics with bombyx mori silk fibroin gel

The enzyme glucose oxidase (GOD) was immobilized on the nonwoven fabrics, which have excellent properties in diffusivity of substrates, mechanical strength, and handling, with Bombyx mori silk fibroin gel. The nonwoven fabrics of silk fibroin, viscose rayon, poly-ethyleneterephthalate, 6-nylon, and polypropylene with activated surface by fluoline treatment were used. The stabilities of GOD to heat or pH changes were much improved by the immobilization as well as the case of the GOD immobilized in the silk fibroin membrane. Among nonwoven fabrics, silk fibroin was the most excellent support material for the immobilization of GOD although all nonwoven fabrics used here are able to be used as the support materials. The increase of the sensitivity was observed when the glucose sensor was made with the GOD immobilized on nonwoven silk fabrics as four times compared with the case of the GOD immobilized in the silk fibroin membrane.     

Patterning of Non-Linear Optical Crystals in Glass by Laser-Induced Crystallization

This paper reports recent progress in the patterning of non-linear optical crystals on the glass surface by laser irradiation. Two techniques for the writing of crystal lines have been developed, i.e., rare-earth (samarium) atom heat processing and transition metal atom heat processing, in which a continuous wave Nd:YAG laser (wavelength: λ=1064 nm) is irradiated to the glasses containing rare-earth (RE: Sm³⁺, Dy³⁺) ions or transition metal (TM: Ni²⁺, Fe²⁺, V⁴⁺) ions. The writing of crystal lines such as β-BaB₂O₄, Sm _x Bi_{1− x} BO₃, and Ba₂TiGe₂O₈ showing second harmonic generations has been successful. It is clarified from the azimuthal dependence of second harmonic intensity and polarized micro-Raman scattering spectra that crystal lines consist of highly oriented crystals along the crystal line growth direction. It is also possible to write two-dimensional crystal bending or curved lines by just changing the laser scanning direction. The mechanism of the laser-induced crystallization has been proposed.     

Mechanical and moisture-dependent swelling properties of compressed Japanese cedar

In this research, five groups of compressed wood specimens were investigated, four made from compressed Japanese cedar (Cryptomeria japonica D. Don) with compression ratios (CR) of 33%, 50%, 67% and 70%, and one without compressing for control purpose. The measurements of moisture-dependent swelling of the specimens were carried out in the R, T and L directions, with typical strain values of 10%, 1.5% and 0.1% respectively corresponding to the CR = 67%. Mechanical property tests of the compressed wood were also undertaken. Material properties obtained cover radial and tangential swelling strain rates, shear moduli in LR, LT and RT planes, Young’s moduli in the L, R, T directions and Poisson ratios in all planes. The Young’s moduli along the longitudinal and radial directions have been increased by over 300% in relation to the CR of 70%.     

Mobilization and Leaching of Natural and Water Dispersible Colloids in Aggregated Volcanic Ash Soil Columns

Colloid-facilitated transport enhances migration of strongly sorbing compounds (e.g., radionuclides, phosphorus, heavy metals) in soil and groundwater. Mobilization, transport and deposition of soil colloids are the underlying processes governing colloid-facilitated contaminant transport. Although significant progress has been made in simulating mobilization and transport/deposition of model colloids in different collector systems, it may be inadequate for the prediction of natural colloidal behavior in the subsurface. This study quantifies the leaching of natural volcanic ash soil colloids (NC) as well as the simultaneous transport of applied water dispersible soil colloids (WDC) in aggregated volcanic ash soil columns. Two water-saturated soil columns were irrigated with artificial irrigation water (AIW) at an intensity of 80 mm/hr for 60 hours. Two additional columns were irrigated at the same intensity, but a colloidal suspension of 5 mg/L was applied after 20 hours for a period of 20 hours. Effluent colloid concentrations were measured in each experiment. HYDRUS-1D was used for the simulation and estimation of colloid transport parameters. The results clearly showed different kinetics for applied colloid transport and natural colloid leaching. Transport of applied WDC followed first-order attachment kinetics, while the two-site equilibrium/kinetic model with equal fractions of equilibrium and kinetic sites best described the leaching of NC. Coupling these best model approaches well predicted the simultaneous leaching of natural and applied colloids, hereby providing a useful tool for the design of colloid-based in-situ soil remediation systems.     

Evaluating a behavioral demand response trial in Japan: evidence from the summer of 2013

This paper presents results from a behavioral demand response trial targeted to both grid and residential peak hours, in which weekly feedback via paper-based reports, real-time feedback via an in-home display, 30-minute tiered rate, and email prompts are adopted to almost 230 residential customers of a condominium in Funabashi, a city located in Greater Tokyo. Through a randomized experiment, we find that the peak saving impact during grid peak hours (1–4 pm, weekdays only) was 11.6 %, given that all the four interventions provided all at once. In addition, the results show that the variation in peak saving effects by household characteristics exists, and the variation differs among packages of peak saving interventions. Furthermore, we analyzed how much informational elements in weekly reports are considered as useful by residential customers. These results suggest that feedback-based approaches for peak saving can promote households’ energy conservation behavior.