Performance Analysis of Gate-Stack Dual-Material DG MOSFET Using Work-Function Modulation Technique for Lower Technology Nodes

Silicon - Short channel effects (SCEs) along with mobility degradation has a great impact on CMOS technology below 100 nm. These effects can be overcome by using gate and channel...     

Performance Evaluation of Stacked Gate Oxide/High K Spacers Based Gate All Around Device Architectures at 10 nm Technology Node

Silicon - In this paper, we have done performance evaluation of different Gate All Around (GAA) FET device structures using gate-oxide stacking and spacers of different materials including dual and...     

Bioprocess Scale-up for Acetohydroxamic Acid Production by Hyperactive Acyltransferase of Immobilized Rhodococcus Pyridinivorans

Catalysis Letters - In this study, Rhodococcus pyridinivorans cells containing hyperactive acyltransferase was immobilized on various macromolecules based-polymeric matrices and used to improve...     

Analytical Modeling for Translating Statistical Changes to Circuit Variability by Ultra-Deep Submicron Digital Circuit Design

This paper presents a physics-based compact gate delay model that includes all short-channel phenomena prevalent at the ultra-deep submicron technology node of 32 nm. To simplify calculations, the proposed model is connected to a compact α-power law-based (Sakurai-Newton) model. The model has been tested on a wide range of supply voltages. The model accurately predicts nominal delays and the delays under process variations. It has been shown that at lower technology nodes, the delay is more sensitive to threshold voltage variations, specifically at the sub-threshold operating region as compared with effective channel length variations above the threshold region.     

Synthesis and characterization of magnetic nanocomposites of fullerene‐containing polyurethane films for microwave applications

Novel nanocomposites of barium hexaferrite‐ and fullerene‐containing polyurethane were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffractometry, and energy‐dispersive X‐ray diffraction. The nanoparticles showed good dispersion in the polyurethane matrix. Their thermal, mechanical, and electromagnetic absorbance properties were studied. The complex permeability and permittivity were measured in the frequency range of 8.2–12.4 GHz. The maximum reflection loss of the nanocomposites was found to increase with increasing the ferrite content from 1% to 5%, with maximum value of −7.5 dB at only 5% composition. The incorporation of nanofiller not only imparts mechanical strength to the nanocomposite but also shows good radar‐absorbing properties at only 5% filler concentration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Lignin Depolymerization and Conversion: A Review of Thermochemical Methods

The structure of lignin suggests that it can be a valuable source of chemicals, particularly phenolics. However, lignin depolymerization with selective bond cleavage is the major challenge for converting it into value‐added chemicals. Pyrolysis (thermolysis), gasification, hydrogenolysis, chemical oxidation, and hydrolysis under supercritical conditions are the major thermochemical methods studied with regard to lignin depolymerization. Pyrolytic oil and syngases are the primary products obtained from pyrolysis and gasification. A significant amount of char is also produced during pyrolysis. Thermal treatment in a hydrogen environment seems very promising for converting lignin to liquid fuel and chemicals like phenols, while oxidation can produce phenolic aldehydes. Reaction severity, solvents, and catalysts are the factors of prime importance that control yield and composition of the product.     

The Structures of Gd(III) Chelates Conjugated at the Periphery of 3-(1’-Hexyloxy)ethyl-3-devinylpyropheophorbide-a (HPPH) Have a Significant Impact on the Imaging and Therapy of Cancer

3-(1’-Hexyloxyethyl)-3-devinyl-pyropheophorbide-a (HPPH or Photochlor), a tumor-avid chlorophyll-a derivative currently undergoing human clinical trials, was conjugated at various peripheral positions (position-17 or 20) of HPPH with either Gd(III)-aminobenzyl-DTPA (Gd(III) DTPA) or Gd(III)-aminoethylamido-DOTA (Gd(III) DOTA). The corresponding conjugates were evaluated for in vitro PDT efficacy, T₁, T₂ relaxivities, in vivo fluorescence, and MR imaging under similar treatment parameters. Among these analogs, the water-soluble Gd(III)-aminoethylamido-DOTA linked at position-17 of HPPH, i. e., HPPH-17-Gd(III) DOTA, demonstrated strong potential for tumor imaging by both MR and fluorescence, while maintaining the PDT efficacy in BALB/c mice bearing Colon-26 tumors (7/10 mice were tumor free on day 60). In contrast to Gd(III) DTPA (Magnevist) and Gd(III) DOTA (Dotarem), the HPPH-Gd(III) DOTA retains in the tumor for a long period of time (24 to 48 h) and provides an option of fluorescence-guided cancer therapy. Thus, a single agent can be used for cancer-imaging and therapy. However, further detailed pharmacokinetic, pharmacodynamic, and toxicological studies of the conjugate are required before initiating Phase I human clinical trials.     

Thermo-rheological analysis of various chain extended recycled poly(ethylene terephthalate)

Three chain extenders, pyromellitic dianhydride (PMDA), ethylene carbonate (EC), and a polymeric-epoxide, were investigated for improving recycled p(ethylene terephthalate) (r-PET) properties with melt extrusion. The amount of additives and processing temperatures were also varied to check for melt degradation. Small amplitude oscillatory shear experiments were performed to probe rheological changes with different chain extenders. Capillary rheometry with haul-off was also performed to measure extensional viscosity and melt strength. Higher loadings of the chain extenders were found to improve properties of r-PET. These chain extenders definitely increased melt viscosities when incorporated at the higher level of the ranges examined, matching that of virgin PET. EC addition resulted in high shear thinning of the polymer. Epoxy and PMDA added to r-PET produced products with the same extensional viscosity as v-PET. Haul-off experiments demonstrate superior performance by epoxy-modified r-PET compared to v-PET.     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.