Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

Tri-amelia and phocomelia with multiple malformations resembling Roberts syndrome in a fetus: is it a variant or a new syndrome?

An initial Bentall operation was performed on a patient aged 38 years with annuloaortic ectasia and aortic regurgitation. An echocardiogram and RI angiogram revealed a perigraft aortic aneurysm on the same patient aged 45 years. The aneurysm gradually developed and the maximum diameter reached 90 mm in size. The Redo-Bentall operation (Piehler modification) was successfully done once again on the same patient aged 56 years. The anastmosis between the right coronary orifice and the graft was detached on all sides. The anastmosis between the left coronary orifice and the graft was detached two thirds of all sides.     

注入种子CuBr激光器中的光谱控制

报道了采用注入种子方法．对ＣｕＢｒ激光器进行激光模式控制的实验结果。实现了单纵模ＣｕＢｒ激光脉冲的注入放大，获得了功率为１００ｍＷ水平的窄线宽铜激光辐射．在理论上分析了短脉冲高增益激光器中注入种子过程，讨论了在注入种子ＣｕＢｒ激光器中进行光谱控制的实验结果．     

隧洞开挖网络进度的优化研究

本文以单项工程为研究对象,以隧洞工程为例,研究了单项工程施工所需用的时间。文中以施工单位所具有的资源,结合施工工作环境、作业空间为约束条件,以费用最小为目标函数,建立了优化模型。由资源的工作性能指标,利用模糊数学原理,对资源间的匹配程度作了定量分析,并进一步推出了不同匹配程度的资源对作业时间的影响的计算式。并从影响各工序完工时间的因素的随机性出发,利用数理统计理论,由各工序的细分活动的规律推出了各工序的完工需用时间的概率表达式,解决了工期与置信度间的关系。最后结合工程实例,求出了一定置信度下,不同资源供应时的最优工期。     

Nicalon-fibre-reinforced silicon-carbide composites via polymer solution infiltration and chemical vapour infiltration

A new, faster process was developed for the fabrication of Nicalon-fibre-reinforced SiC composites by combining polymer solution infiltration (PSI) and chemical vapour infiltration (CVI). The process led to the near-net-shape fabrication of fibre-reinforced ceramic-matrix composites and reduced infiltration time. Typical flexural strength and fracture toughness of these composites were 296 MPa and 10.9 MPa m^1/2 at room temperature (RT) and 252 MPa and 9.6 MPa m^1/2 at 1000 °C, respectively. The composites exhibited load-carrying capability after crack initiation.     

Low-Energy Digit-Serial/Parallel Finite Field Multipliers

Digit-serial architectures are best suited for systems requiring moderate sample rate and where area and power consumption are critical. This paper presents a new approach for designing digit-serial/parallel finite field multipliers. This approach combines both array-type and parallel multiplication algorithms, where the digit-level array-type algorithm minimizes the latency for one multiplication operation and the parallel architecture inside of each digit cell reduces both the cycle-time as well as the switching activities, hence power consumption. By appropriately constraining the feasible primitive polynomials, the mod p(x) operation involved in finite field multiplication can be performed in a more efficient way. As a result, the computation delay and energy consumption of one finite field multiplication using the proposed digit-serial/parallel architectures are significantly less than of those obtained by folding the parallel semi-systolic multipliers. Furthermore, their energy-delay products are reduced by a even larger percentage. Therefore, the proposed digit-serial/parallel architectures are attractive for both low-energy and high-performance applications.     

“勇士号”遥控移动式作业机器人

介绍了８６３智能机器人型号之一－以核工业为应用背景的“勇士号”遥控移动式机器人的作业内容及其主要功能指标，分析了该型号的总体设计思想，同时概括总结了其操作性能，移动性能及计算机系统等方面的技术特点。     

氩离子激光掺铒光纤的双稳态

分析了掺铒光纤双稳态（ＥＤＦＯＢ）的工作原理、工作条件和特性，并利用氩离子激光（５１４．５ｎｍ）实现了ＥＤＦＯＢ的低功率（＜１０ｍＷ）运转。实验与理论结果基本相符。     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。