Identical locations transmission electron microscopy study of Pt/C electrocatalyst degradation during oxygen reduction reaction

The degradation mechanisms of Pt nanoparticles supported on Carbon have been characterized during oxygen reduction reaction (ORR) conditions using IL-TEM. A TEM grid is used as the sole working electrode allowing a direct correlation between the electrochemical response and the TEM analysis. We mainly observe a decrease in nanoparticle size with some particle disappearance and some particle sintering after potential cycling simulating the start-up and shut-down of a fuel cell. The observation of nanoparticles with reduced particle size provides evidence that dissolution phenomena are the main cause of degradation in Pt/C electrocatalysts, under ORR conditions.     

Electrodialytic removal of cadmium from wastewater sludge

This paper presents for the first time laboratory results demonstrating electrodialytic removal of Cd from wastewater sludge, which is a method originally developed for soil remediation. During the remediation a stirred suspension of wastewater sludge was exposed to an electric dc field. The liquid/solid (ml/g fresh sludge) ratio was between 1.4 and 2. Three experiments were performed where the sludge was suspended in distilled water, citric acid or HNO3. The experimental conditions were otherwise identical. The Cd removal in the three experiments was 69, 70 and 67%, respectively, thus the removal was approximately the same. Chemical extraction experiments with acidic solutions showed that 5-10 times more Cd could be extracted from decomposed sludge than from fresh sludge. It is likely that the mobilization of Cd during decomposition of the sludge contributes to the efficient removal of Cd by the electrodialytic method. Extraction experiments and electrodialytic remediation using distilled water as enhancement agent showed that 0.3% Cd could be extracted from decomposed sludge during 1 week in closed flasks, whereas 69% was removed during 2 weeks of electrodialytic remediation in a stirred solution in contact with atmospheric air. A combination of aerobic decomposition and electrodialytic treatment could be a promising method for Cd removal from wastewater sludge, and thus Cd could be removed without the addition of chemicals to the sludge.     

Comparison of proteomic biomarker panels in urine and serum for ovarian cancer diagnosis

Purpose : The purposes of this study were to confirm previously found candidate epithelial ovarian cancer biomarkers in urine and to compare a paired serum biomarker panel and a urine biomarker panel from the same study cohort with regard to the receiver operating characteristic curve (ROC) area under the ROC curve (AUC) values. Experimental design : Four significant urine biomarkers were confirmed among 130 pelvic mass patients in the present study. The four biomarkers form a potential urine biomarker panel. From the same study cohort, the potential urine biomarker panel was compared to a serum biomarker panel, consisting of seven proteins/peptides, OvaRI. Results : Multivariate analysis of the urine panel demonstrated a significant differentiation (p<0.0001) between epithelial ovarian cancer patients and patients with benign ovarian pelvic masses. The ROC AUC of the urine panel was 0.84 and the ROC AUC of OvaRI was 0.83. Combining the urine panel with OvaRI demonstrated a significant contribution from both, for urine peaks, OR=2.12 and for OvaRI, OR=1.39; the ROC AUC of this model was 0.88. Conclusions and clinical relevance : We demonstrated that both urine and serum can be used individually or in combination to potentially aid in ovarian cancer diagnostics. Urine proteomic profiling could provide biomarkers for the non‐invasive test required in clinical practice.     

Cellulose‐Based Microparticles for Magnetically Controlled Optical Modulation and Sensing

Responsive materials with birefringent optical properties have been exploited for the manipulation of light in several modern electronic devices. While electrical fields are often utilized to achieve optical modulation, magnetic stimuli may offer an enticing complementary approach for controlling and manipulating light remotely. Here, the synthesis and characterization of magnetically responsive birefringent microparticles with unusual magneto‐optical properties are reported. These functional microparticles are prepared via a microfluidic emulsification process, in which water‐based droplets are generated in a flow‐focusing device and stretched into anisotropic shapes before conversion into particles via photopolymerization. Birefringence properties are achieved by aligning cellulose nanocrystals within the microparticles during droplet stretching, whereas magnetic responsiveness results from the addition of superparamagnetic nanoparticles to the initial droplet template. When suspended in a fluid, the microparticles can be controllably manipulated via an external magnetic field to result in unique magneto‐optical coupling effects. Using a remotely actuated magnetic field coupled to a polarized optical microscope, these microparticles can be employed to convert magnetic into optical signals or to estimate the viscosity of the suspending fluid through magnetically driven microrheology.     

Molecular Nanowire Bonding to Epitaxial Single‐Layer MoS2 by an On‐Surface Ullmann Coupling Reaction

Lateral heterostructures consisting of 2D transition metal dichalcogenides (TMDCs) directly interfaced with molecular networks or nanowires can be used to construct new hybrid materials with interesting electronic and spintronic properties. However, chemical methods for selective and controllable bond formation between 2D materials and organic molecular networks need to be developed. As a demonstration of a self‐assembled organic nanowire‐TMDC system, a method to link and interconnect epitaxial single‐layer MoS₂ flakes with organic molecules is demonstrated. Whereas pristine epitaxial single‐layer MoS₂ has no affinity for molecular attachment, it is found that single‐layer MoS₂ will selectively bind the organic molecule 2,8‐dibromodibenzothiophene (DBDBT) in a surface‐assisted Ullmann coupling reaction when the MoS₂ has been activated by pre‐exposing it to hydrogen. Atom‐resolved scanning tunneling microscopy (STM) imaging is used to analyze the bonding of the nanowires, and thereby it is revealed that selective bonding takes place on a specific S atom at the corner site between the two types of zig‐zag edges available in a hexagonal single layer MoS₂ sheet. The method reported here successfully combining synthesis of epitaxial TMDCs and Ullmann coupling reactions on surfaces may open up new synthesis routes for 2D organic‐TMDC hybrid materials.     

Peptides Derived from Histone 3 and Modified at Position 18 Inhibit Histone Demethylase KDM6 Enzymes

The KDM6 subfamily of histone lysine demethylases has recently been implicated as a putative target in the treatment of a number of diseases; this makes the availability of potent and selective inhibitors important. Due to high sequence similarity of the catalytic domain of Jumonji C histone demethylases, the development of small‐molecule, family‐specific inhibitors has, however, proven challenging. One approach to achieve the selective inhibition of these enzymes is the use of peptides derived from the substrate, the histone 3 C terminus. Here we used computational methods to optimize such inhibitors of the KDM6 family. Through natural amino acid substitution, it is shown that a K18I variant of a histone H3 derived peptide significantly increases affinity towards the KDM6 enzymes. The crystal structure of KDM6B in complex with a histone 3 derived K18I peptide reveals a tighter fit of the isoleucine side chain, compared with that of the arginine. As a consequence, the peptide R17 residue also has increased hydrophilic interactions. These interactions of the optimized peptide are likely to be responsible for the increased affinity to the KDM6 enzymes.     

Scaling factors for channel width variations in tree-like flow field patterns for polymer electrolyte membrane fuel cells - An experimental study

To have a uniform distribution of reactants is an advantage to a fuel cell. We report results for such a distributor with tree-like flow field plates (FFP). Numerical simulations have shown that the width scaling parameters of tree-like patterns in FFPs used in polymer electrolyte membrane fuel cells (PEMFC) reduces the viscous dissipation in the channels. In this study, experimental investigations were conducted on a 2-layer FF plate possessing a tree-like FF pattern which was CNC milled on high-quality graphite. Three FF designs of different width scaling parameters were employed. I–V curves, power curves and impedance spectra were generated at 70%, 60% and 50% relative humidity (25 cm² active area), and compared to those obtained from a conventional 1-channel serpentine FF. It was found that the FF design, with a width scaling factor of 0.917 in the inlet and 0.925 in the outlet pattern, exhibited the best peak power out of the three designs (only 11% - 0.08 W/cm² lower than reference serpentine FF). Results showed that a reduction of the viscous dissipation in the flow pattern was not directly linked to a PEMFC performance increase. It was found that water accumulation, together with a slight increase in single PEMFC resistance, were the main reasons for the reduced power density. As further improvements, a reduction of the number of branching generation levels and width scaling factor were recommended.     

Distribution of heat exchange in optimum diabatic distillation columns

We improved our model for minimization of entropy production rate in diabatic tray distillation. The entropy production rate had contributions from heat and mass transfer on the trays and from heat exchangers connected to the trays. The area of the heat exchangers were not used as free variables, but calculated from four different area distribution rules. The total heat exchange area and its distribution over the column had a significant effect on the entropy production rate in the system. In the limit of infinitely large forces, the results of an adiabatic column were obtained, as expected. As the forces became smaller, the distribution of the area became more important. The area distribution rule with constant average force in each heat exchanger had the lowest entropy production rate of the rules used. Possible consequences for column design were discussed, and a sketch with the characteristics of an optimum distillation column was presented. Two minimization algorithms were used with similar outcome; the Matlab^® function fmincon being the fastest.     

Implementation of a GIS-based management tool for conservation of biodiversity within the municipality of Oslo, Norway

Tools to effectively apply biological information in daily physical planning cases are viewed as essential in order to preserve and manage natural habitats in highly pressured urban areas. This paper describes a GIS-based management tool for conservation and management of biodiversity and the process of implementation in the capital of Oslo, Norway. The main objective of this multi-agency effort is to ensure a sustainable and responsible management of the biodiversity within the municipality. A political decision on the state level encourages all municipalities to survey and classify their biological diversity according to a scale of importance within 2003. Furthermore the results from the survey were encouraged to be implemented in the daily physical planning at a local level. The assignment called for structured, classified and accessible information about the biological resources of the municipality. The electronic tool presented makes it possible to combine biological information with any other information that is relevant for a planning issue. We believe the GIS-based management tool has a strong potential to be transferred to other municipalities in Norway as well as to other countries with organised environmental management systems at both local, regional and national levels.