LIGA micro-openings for coherence characterization of X-rays

Infinitely thin opaque screens serving for diaphragms as defined in the visible-light optics are not feasible for operation with X-ray beams due to their high penetrability. Micro-openings of predicted sidewall shape in a gold layer up to 140 μm thick which would provide low transparency, are proposed. The proposed micro-openings were made using the LIGA technique and tested successfully at photon energies of up to 25 keV. The micro-openings can be used as targets for coherence X-ray pattern or, if long interference tails are avoided by means of the advanced sidewall shape, as X-ray beam collimators.     

Effects of estrogen-induced hyperlipidemia on the erythrocyte membrane in chicks

The effects of estrogen-induced hyperlipidemia on plasma lipid peroxidation, fatty acid composition and osmotic fragility of erythrocytes in chickens were studied. Young male chickens implanted with estrogen for three wk developed a marked hyperlipidemia. Plasma levels of triglyceride, cholesterol and phospholipid were elevated 68-, four- and 24-fold, respectively, over controls. There was also a two-fold increase in plasma lipid peroxidation measured by the thiobarbituric acid test. Vitamin E supplement (1,000 IU/kg diet) reduced the plasma lipid peroxidation to the control level, but had no effect on the plasma lipid content. Estrogen-induced hyperlipidemia resulted in changes in the fatty acid composition of membrane lipids of erythrocytes. The major changes were an increase in oleic acid from 10.0% to 14.2% and a decrease in linoleic acid from 31.3% to 26.0%. The erytrocytes with an altered membrane fatty acid composition were found to have an increased osmotic fragility. It was apparent that there was a direct correlation between the oleic acid content and the osmotic fragility of erythrocytes.     

Constructing and applying higher order textons: Estimating breast cancer risk

Texture analysis based on textons is extended by introducing a method for computing textons of arbitrary order. First-, second- and third-order textons are applied to classify screening mammograms as to indicate a low or high risk of breast cancer. First-order textons are found to provide better estimates of breast cancer risk than other orders on their own but the combination of first- and second-order textons outperforms first-order textons alone and other combinations of two orders. Combining all three orders of textons does not improve classification. This example indicates that including higher-order textons has the potential to improve classification performance.     

Open annotations on multimedia Web resources

Many Web portals allow users to associate additional information with existing multimedia resources such as images, audio, and video. However, these portals are usually closed systems and user-generated annotations are almost always kept locked up and remain inaccessible to the Web of Data. We believe that an important step to take is the integration of multimedia annotations and the Linked Data principles. We present the current state of the Open Annotation Model, explain our design rationale, and describe how the model can represent user annotations on multimedia Web resources. Applying this model in Web portals and devices, which support user annotations, should allow clients to easily publish and consume, thus exchange annotations on multimedia Web resources via common Web standards.     

Epsilon Flock: a model migration language

Model-driven engineering introduces additional challenges for controlling and managing software evolution. Today, tools exist for generating model editors and for managing models with transformation, validation, merging and weaving. There is limited support, however, for model migration—a development activity in which instance models are updated in response to metamodel evolution. In this paper, we propose conservative copy—a style of model transformation that we believe is well-suited to model migration—and Epsilon Flock—a compact model-to-model transformation language tailored for model migration. The proposed structures are evaluated by comparing the conciseness of model migration strategies written in different styles of transformation language, using several examples of evolution taken from UML and the graphical modelling framework.     

Structure of resorcinol,phenol, and furan resins by MALDI‐TOF mass spectrometry and 13C NMR

The structure of traditional, linear phenol–resorcinol–formaldehyde (PRF) resins, urea‐branched PRF resins, and phenol–resorcinol–furfural (PRFuran) resins has been investigated in depth by both matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) mass spectroscopy and ¹³C NMR. The structure of a variety of oligomers has been obtained, and the structures present in each of the three types of resins related to the very different percentages of resorcinol needed for their equal performance as adhesives. The oligomers type and species distribution appeared very different for each case. PRF resins performance is improved by maximizing either the proportion of resorcinol‐containing oligomers or methylol‐groups containing oligomers, even without any resorcinol, or both. It is equally obtained by the minimization of the relative proportion of the low reactivity Phenol (CH₂ Phenol) species in which resorcinol is not present, this being the most important parameter. This can be obtained by more effective use of the resorcinol by just modifying the resin manufacturing procedure. This parameter instead does not appear to be determinant in PRFuran resins. In these, it is the higher molecular weight of furfural in relation to formaldehyde that engenders for the same manufacturing procedure a correspondingly lower proportion of resorcinol in the resin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2665–2674, 2004     

Der Sicherheitsaspekt beim Eintrag von Schüttgütern in Behälter

Safety aspects of charging bulk material into vessels or containers . The safe charging of bulk material requires a careful analysis of the potential sources of danger which can result from the physical properties of the materials and the design and construction material of plant and equipment. The method adopted in this analysis is illustrated and explained for selected examples. Criteria for safe charging methods are compiled and explained. A selection of proven charging equipment is listed and technically evaluated with respect to safety and operating criteria. Steps that must be taken to avoid charging errors are discussed. Special problems encountered on connecting pressureless charging devices to pressure vessels are outlined explained. The utilization of inert gas as a preferred method of explosion protection is discussed. Various methods are compared, and their application to special problems in charging bulk material is illustrated.     

Evolution-in-materio: solving computational problems using carbon nanotube–polymer composites

Evolution-in-materio uses evolutionary algorithms to exploit properties of materials to solve computational problems without requiring a detailed understanding of such properties. We show that using a purpose-built hardware platform called Mecobo, it is possible to solve computational problems by evolving voltages and signals applied to an electrode array covered with a carbon nanotube–polymer composite. We demonstrate for the first time that this methodology can be applied to function optimization and also to the tone discriminator problem (TDP). For function optimization, we evaluate the approach on a suite of optimization benchmarks and obtain results that in some cases come very close to the global optimum or are comparable with those obtained using well-known software-based evolutionary approach. We also obtain good results in comparison with prior work on the tone discriminator problem. In the case of the TDP we also investigated the relative merits of different mixtures of materials and organizations of electrode array.     

Hierarchical classification in text mining for sentiment analysis of online news

Sentiment analysis in text mining is a challenging task. Sentiment is subtly reflected by the tone and affective content of a writer’s words. Conventional text mining techniques, which are based on keyword frequencies, usually run short of accurately detecting such subjective information implied in the text. In this paper, we evaluate several popular classification algorithms, along with three filtering schemes. The filtering schemes progressively shrink the original dataset with respect to the contextual polarity and frequent terms of a document. We call this approach “hierarchical classification”. The effects of the approach in different combination of classification algorithms and filtering schemes are discussed over three sets of controversial online news articles where binary and multi-class classifications are applied. Meanwhile we use two methods to test this hierarchical classification model, and also have a comparison of the two methods.     

Experimental study of stable surfaces for anti-slug control in multi-phase flow

Severe slugging flow is always challenging in oil & gas production, especially for the current offshore based production. The slugging flow can cause a lot of problems, such as those relevant to production safety, fatigue as well as capability. As one typical phenomenon in multi-phase flow dynamics, the slug can be avoided or eliminated by proper facility design or control of operational conditions. Based on a testing facility which can emulate a pipeline-riser or a gas-lifted production well in a scaled-down manner, this paper experimentally studies the correlations of key operational parameters with severe slugging flows. These correlations are reflected through an obtained stable surface in the parameter space, which is a natural extension of the bifurcation plot. The maximal production opportunity without compromising the stability is also studied. Relevant studies have already showed that the capability, performance and efficiency of anti-slug control can be dramatically improved if these stable surfaces can be experimentally determined beforehand. The paper concludes that obtaining the stable surface on the new developed map can significantly improve the production rate in a control scheme. Even though the production rate can be further improved by moving the stable surface using advanced control strategies, the constant inputs can in some cases be preferable due to the easier implementation.