Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.     

Cellulose nanocomposites based on silane reinforced 3-butynoate-substituted zirconium-oxocluster copolymers: Mechanical,thermal and hydrophobic properties

Silica based cellulose nanocomposites obtained from (3-mercaptopropyl)trimethoxysilane or vinyltrimethoxysilane and 3-butynoate-substituted zirconium-oxoclusters were prepared and their surface morphology, wettability, and thermo-mechanical properties were studied. The composites showed a hydrophobic surface, high strength, and resistance to thermal degradation and aging; in comparison to the untreated paper they required a higher temperature to activate combustion and generated less heat during all thermal processes.     

Texture anisotropy technique in brain degenerative diseases

Structural alterations anisotropy-based measured for different areas for the most common types of dementia diseases could be a biomarker of brain impairment. The current work aims to assess whether texture anisotropy can discriminate both healthy versus Alzheimer’s and Pick’s patients based on regional evaluation while maintaining high predictive power. The investigated area is reduced from the whole-brain surface to three major lobes (i.e., frontal, temporal and parietal). A predictive model was proposed to associate a disease with a specific area in the brain based on the anisotropy values. Simultaneous analysis of 1680 measurements from 105 brain magnetic resonance images acquired as T2w and PD sequences was performed to establish the significance of the model. The cerebral calcinosis disease has been used as artificial ground truth. The association based on textural anisotropy between targeted diseases and control patients was performed by using Pearson’s correlation coefficients. A new proposed consistency index investigated the texture anisotropy relevance for all image’s types and all analyzed classes and regions. The validation study is based on area under the receiver-operating characteristic curve that depicted the overall diagnostic performance of the texture anisotropy in each region. The proposed model demonstrated that texture anisotropy is accurate solution in diagnosis of Alzheimer’s and Pick’s diseases when the investigated area is reduced to major lobes, with sensitivity >90% and specificity >80%.

     

Magnetic resonance butterfly coils: Design and application for hyperpolarized C studies

Hyperpolarized ¹³C magnetic resonance spectroscopy in pig models enables cardiac metabolism assessment and provides a powerful tool for heart physiology studies, although the low molar concentration of derivate metabolites gives rise to technological limitations in terms of data quality. The design of dedicated coils capable of providing large field of view with high Signal-to-Noise Ratio (SNR) data is of fundamental importance.     

Effect of the fuel injection strategy on the combustion process in a PFI boosted spark-ignition engine

In this paper, the effect of different fuel injection strategies on the combustion process was investigated in a boosted port fuel injection spark-ignition engine. The experiments were performed on a partially transparent single-cylinder engine, equipped with a four-valve head and boost device. Single and double fuel injection strategies were tested in the open-valve condition. Moreover, two fuel injection pressures were considered. Optical techniques based on 2D-digital imaging were used to follow the flame propagation in the combustion chamber. In particular, the diffusion-controlled flames near valves and on cylinder walls due to the fuel film burning were studied. Two-colour pyrometry was employed to measure soot concentration. In-cylinder optical investigations were correlated to the engine parameters and to the exhaust emissions.     

Studies on physico-chemical and antibacterial properties of grafted pullulans solutions

The physico-chemical properties of three grafted pullulans (P) having linked poly(3-acrylamidopropyl)trimethylammonium chloride (pAPTAC) as side chains (P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 with 22.53, 29.05, and 34.51 (wt.%) of pAPTAC content in polymer, respectively) and possessing polyelectrolyte character were determined by light scattering analysis. All grafted pullulan aqueous solutions were tested in the presence of 0.5 M NaCl, KCl, NaNO₃ or KNO₃. The biggest associations were recorded in 0.5 M NaCl aqueous solutions for P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 according to the maximum values for R_g extracted from MALLS (multiangle laser light scattering) measurements. Also, the dominant conformation in salted solution of these polyelectrolytes was random coil as Debye plot analysis revealed. Antibacterial activity was tested by Kirby–Bauer diffusion method and all grafted pullulans dissolved in aqueous solutions of 0.5 M NaCl have developed inhibition zone against Staphylococcus aureus (ATCC 25923).     

Questioning the Living/Nonliving Dichotomy: Evidence From a Patient With an Unusual Semantic Dissociation.

In this article the authors describe a patient (J.P.) whose category-specific naming deficit eluded the classical dichotomies between living versus nonliving items or visual versus functional attributes. At age 22, he had herpes simplex encephalitis followed by a left temporal lobectomy. J.P. was tested on measures of visual perception, category naming, fluency, and name-picture matching. He showed a severe impairment naming and identifying fruits, vegetables, and musical instruments. His performance with animals and birds was spared inconsistently, meaning that even the preserved categories were, at some point, affected. J.P.'s unusual deficit supports the hypothesis that semantic knowledge is organized in the brain on the basis of object properties, which can cut across the living-nonliving categorical distinction. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Characterisation of surface oxidation of nickel-titanium alloy by ion-beam and electrochemical techniques

The passivating effects produced on Ni₄₉Ti₅₁ (at.%) shape memory alloy by electropolishing in methanol-sulphuric acid electrolyte or thermal treatment in air are investigated with ion-beam techniques (secondary ion mass spectrometry (SIMS) and mass resolved ion scattering spectrometry (MARISS)) and electrochemical techniques (polarisation curves, photocurrent spectroscopy and impedance). Electropolishing produces a limited passivation due to formation of a thin layer of amorphous TiO₂, which causes only a slight hindrance to the oxygen evolution reaction. Thermal treatment in air at 450 °C causes a more substantial passivation due to formation of a thick oxide layer, estimated at about 80 nm for a 16 h treatment on the basis of weight increase, disregarding roughness. Data indicate that the film produced by thermal oxidation has probably a duplex structure, with a porous outer layer with inclusions of Ni species and a compact inner layer, in contact with the substrate, consisting of (essentially) nickel free TiO₂ rutile.     

Small Cells in Cellular Networks: Challenges of Future HetNets

Due to their low cost and easy deployment, small cells provide a viable and cost-effective way of improving the cellular coverage and capacity both for homes and enterprises, both in metropolitan and rural areas. Stimulated by their attractive features and advantages, the ongoing development and deployment of small cells by manufacturers and mobile network operators have seen a surge in recent years. Together with macro-cells, they form, what are called Heterogeneous Networks or HetNets. However, the successful rollout and operation of small cells are still facing significan issues. In this paper the need for, challenges and solutions of small cell deployments are analyzed. This analysis is conducted with respect to self-organizing features, interference coordination, energy efficiency and spectrum efficiency. The analysis is complemented with numerical results based on system simulations in Macro-only and HetNet scenarios and also on real measurements performed on an mobile operator network. Results show the clear improvement that a HetNet brings in term of user throughput and also the amunt of spectrum waste that is present in nowadays’ operator networks.