Growth/no growth interfaces of Bacillus cereus, Staphylococcus aureus and Salmonella enteritidis in model systems based on water activity, pH, temperature and ethanol concentration

This study focuses its attention on the boundary between the growth and no growth of three strains ofSalmonella enteritidis , Bacillus cereus and Staphylococcus aureus in the presence of growth controlling factors such as temperature, pH, water activity (A_w) and ethanol concentration. Preliminarly, the minimal values of pH, A_wand temperature, and the maximum ethanol concentrations allowing the growth of the considered micro-organisms were determined. The calculation of these values enabled the use of logistic model to evaluate the growth/no growth boundary for the bacteria in relation to the considered independent variables. The location of the growth/no-growth boundaries for S. enteritidis and Staph. aureus were strongly affected, at the same ethanol concentration, by temperature, pH and A_w. Among the considered species, Staph. aureus was endowed with the highest sensitivity to low pH values whileB. cereus's growth/no growth interface, was quite unaffected by the combination of the stresses, when the physico–chemical conditions were above the minimum for growth. The effects of temperature, A_wand ethanol on the limitation of growth of the considered species were not merely additive. It was possible to identify the combinations of such factors preventing the growth of Salmonella enteritidis, Staph. aureus and B. cereus.     

Relationship between peptide selectivities of human transporters associated with antigen processing and HLA class I molecules

Efficiency of presentation of a peptide epitope by a MHC class I molecule depends on two parameters: its binding to the MHC molecule and its generation by intracellular Ag processing. In contrast to the former parameter, the mechanisms underlying peptide selection in Ag processing are poorly understood. Peptide translocation by the TAP transporter is required for presentation of most epitopes and may modulate peptide supply to MHC class I molecules. To study the role of human TAP for peptide presentation by individual HLA class I molecules, we generated artificial neural networks capable of predicting the affinity of TAP for random sequence 9-mer peptides. Using neural network-based predictions of TAP affinity, we found that peptides eluted from three different HLA class I molecules had higher TAP affinities than control peptides with equal binding affinities for the same HLA class I molecules, suggesting that human TAP may contribute to epitope selection. In simulated TAP binding experiments with 408 HLA class I binding peptides, HLA class I molecules differed significantly with respect to TAP affinities of their ligands. As a result, some class I molecules, especially HLA-B27, may be particularly efficient in presentation of cytosolic peptides with low concentrations, while most class I molecules may predominantly present abundant cytosolic peptides.     

Corrosion behaviour of the extruded and unidirectionally solidified AlAl4Ca eutectic alloy in a neutral sodium chloride solution

The corrosion behaviour of extruded and unidirectionally solidified AlAl₄Ca eutectic alloy in a neutral sodium chloride solution has been compared with the behaviour of commercially pure Al and AlCu alloy. From both anodic and cathodic cyclic linear potentiodynamic measurements and from S.E.M. observations it was possible to point out that the corrosion behaviour of unidirectionally solidified alloy is substantially equal to that of the extruded alloy, slightly different from that of commercially pure Al and better than AlCu alloy. Therefore, the use of this new lamellae-reinforced AlAl₄Ca composite is promising, even though from the corrosion point of view further studies involving different techniques and conditions (solutions, temperature, surface state, stress, etc.) should be undertaken.     

A study of the behaviour of titanium in acidic solution. Part 1 — Anodic behaviour and behaviour in “ababdoned” conditions

Despite numerous investigations into the corrosion behaviour of Ti and its alloys there are numerous discrepancies in literature with respect to the type of the tetravalent ion formed during the dissolution of titanium in aerated acid solutions; the same applies to the thermodynamical data concerning a possible redox reaction between titanium ions having different valencies. It is for this reason that the authors make an attempt at showing the importance of the formation of tetravalent titanium ions during the spontaneous passivation of titanium in acidic solutions. In this context they start by studying the anodic behaviour of titanium, in order to work out a basis for the evaluation of specimens of different origin. The studies are carried out in aerated and deoxygenated sulfuric acid, with and without external polarization. The anodic behaviour is then interpreted in terms of the mixed potential theory.     

Transformations of mercury in the terrestrial isopod Porcellio scaber (Crustacea)

The biological cycle of mercury in the terrestrial isopod Porcellio scaber was investigated. Testing the possibility of in vivo Hg(2+) methylation was divided into two methodologically different parts. Firstly, concentrations of total mercury and MeHg in isopods P. scaber and their environment from a Hg-unpolluted area were measured by the use of validated methods (CV AAS, CV AFS). The data obtained show that the percentage of MeHg in leaves, soil and faeces was less than 1%. In contrast, the percentage of MeHg in gut and hepatopancreas was increased to 14 and 77%, respectively, indicating methylation of Hg(2+) in the gut and its further accumulation in glands. To confirm this assumption, the second methodology was applied-a radiotracer technique with 203Hg(2+) of high specific activity. There are few radiotracer techniques for Hg-methylation assays; for our work we chose the method of Czuba et al. which includes alkaline leaching of Hg species, their extraction into dithizone-toluene, followed by specific separation of Hg dithizonates by thin-layer chromatography and gamma counting. All steps of the analytical protocol were checked and optimised by the use of aqueous solutions of 203Hg(2+) and Me(203)Hg(+). The most important finding was that cleaning-up the extract through a florisil column is not appropriate, because the column retains different percentages of Hg(2+) and MeHg(+) and consequently affects the accuracy of the final result. This optimised protocol was then applied to Hg transformation studies in the terrestrial isopod P. scaber. Leaching Hg species from P. scaber fed with 203Hg(2+) or Me(203)Hg(+) dosed food was completely efficient only at elevated temperatures. Preliminary results of methylation/demethlytion studies are rather variable but they show that both processes (Hg(2+)<-->MeHg(+)) take place in the isopod P. scaber. Additionally, an assessment of the mass balance of Hg in isopods P. scaber exposed to 203Hg(2+) indicates that volatile Hg species are also formed.     

分析泄漏功率攻击采用90nm CMOS技术的加密器件

在电子商务与电子银行等应用中,安全要求越来越严格.虽然加密技术提供了强健的算法,但这些算法的物理实现一般会通过器件电气运行中的物理现象,泄漏一些信息,攻击者会利用它来探测密钥.     

Evaluating mechanical properties and degradation of YTZP dental implants

Lately new biomedical grade yttria stabilized zirconia (YTZP) dental implants have appeared in the implantology market. This material has better aesthetical properties than conventional titanium used for implants but long term behaviour of these new implants is not yet well known. The aim of this paper is to quantify the mechanical response of YTZP dental implants previously degraded under different time conditions and compare the toughness and fatigue strength with titanium implants. Mechanical response has been studied by means of mechanical testing following the ISO 14801 for Standards for dental implants and by finite element analysis. Accelerated hydrothermal degradation has been achieved by means of water vapour and studied by X-ray diffraction and nanoindentation tests. The results show that the degradation suffered by YTZP dental implants will not have a significant effect on the mechanical behaviour. Otherwise the fracture toughness of YTZP ceramics is still insufficient in certain implantation conditions.     

Comparison of shear strength tests on AV119 epoxy-joined ceramics

The results of an experimental investigation on epoxy-joined CVD SiC and alumina tested in shear and apparent shear mode by four different configurations are presented. Ceramics have been joined by an epoxy adhesive (AV119), which is not to be considered as the final joining material for high temperature applications, but just as a model brittle joining material chosen to obtain several joined samples in a reasonable time. Advantages and disadvantages of each configuration are discussed and compared to results obtained with the same epoxy-joined carbon/carbon composites, tested by the same shear tests.     

Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results

Microwaves at 2.45 GHz have been applied to ignite the combustion synthesis of compacted Ti–Si–C powders mixtures, having 1:1:1 atomic ratio, in order to join SiC-based components. A mixture of different refractory phases such as TiC and TiSi₂ were obtained. Depending on the synthesis conditions, no residual silicon in the joint was detected, suggesting the suitability of the here proposed experimental joining approach for nuclear plants and high temperature applications. A simplified model was developed with the aim of obtaining a deeper understanding of the here proposed rapid, almost pressure-less and localized heating joining method. Experimental and numerical simulation results demonstrate that joining of SiC can be rapidly obtained with minimization of heat affected zones in the SiC substrates. Maximum apparent shear strength values of the joints ranged from 9.9 to 45.1 MPa, depending on the process conditions.     

Flavonoid pattern of sage (Salvia officinalis L.) unifloral honey

The aim of the present paper was to determine the flavonoids in monofloral sage (Salvia officinalis L.) honey which is characteristic and specific for the area of Croatian coast and islands. For that purpose 38 sage honey samples from two production seasons were analysed. After specific pollen content determination, and analyses of selected physicochemical parameters which confirmed that samples are in compliance with national and international regulations and can be regarded as unifloral sage honeys, flavonoid fraction was isolated and analysed using RP-HPLC/DAD method. The HPLC analysis showed that all examined sage honey samples contain quercetin (3,3′,4′,5,7-pentahydroxyflavone), luteolin (3′,4′,5,7-tetrahydroxyflavone), kaempferol (3,4′,5,7-tetrahydroxyflavone), apigenin (4′,5,7-trihydroxyflavone), chrysin (5,7-dihydroxyflavone) and galangin (3,5,7-trihydroxyflavone), as well as p-coumaric (trans-4-hydroxycinnamic acid) and caffeic acid (3,4-dihydroxycinnamic acid). Total amount of identified flavonoids varied from 109.4 μg/100 g of honey to 589.9 μg/100 g of honey, with the average of 288.5 μg/100 g of honey. All analysed honey samples showed common and specific flavonoid profile which could be the basis for differentiating sage from other monofloral honeys.