Laser surface texturing of ceramics and ceramic composite materials – A review

The surface texturing of ceramics is generally performed through acid-based etching and machining; however, laser texturing may be considered as a more precise, reproducible and eco-friendly process. Furthermore, laser ablation may be used to produce complex patterns on ceramic surfaces, thus offering new surface engineering opportunities. The studies so far conducted on this topic have mainly been application-driven, and since a wide variety of lasers have been used for surface texturing, it is difficult to have a comprehensive understanding of this technique applied to ceramics and ceramic composite materials. Laser texturing requires a great deal of knowledge of the material and the laser source parameters to optimise the process in order to obtain the expected results. It is therefore important to expand the research on the laser texturing of ceramics and CMCs in order to build a relevant amount of literature that can be used to identify the most appropriate parameters for each application. This review provides an overview of most of the technological aspects considered relevant for the laser surface texturing of ceramics and CMCs, and includes the fundamentals of laser-material interactions and a summary of the used equipment and parameters. Furthermore, most of the techniques related to the modifications of surface material induced by a laser are critically reviewed, and the new horizons that are opening up, in the context of the modification of surfaces to improve the performances of materials for several applications, are discussed.     

Laser surface nanostructuring for reliable Si3N4/Si3N4 and Si3N4/Invar joined components

IR pulsed laser radiation in air was applied to Si₃N₄ and Invar to obtain reliable Si₃N₄/Si₃N₄ and Si₃N₄/Invar adhesive bonded components. The laser pre-treatment produced a homogeneous nanostructured oxide layer on the surfaces, which effectively increased the adhesion at the adhesive/adherends interface and led to cohesive failure in the joining material. The mechanical strength of Si₃N₄/ Si₃N₄ and Si₃N₄/Invar joined components was measured, with and without laser nanostructuring, before and after thermal cycling from room temperature to 50?K, and it resulted that the exposure to extremely low temperatures did not affect the mechanical integrity of the joints. It was also demonstrated that this laser pre-treatment did not alter the mechanical properties of the ceramic substrate.     

A comparative study of photocatalytically active nanocrystalline tetragonal zyrcon-type and monoclinic scheelite-type bismuth vanadate

Monoclinic scheelite-type BiVO₄ is currently considered as one of the most promising non-titania photocatalysts, wheras tetragonal zircon-type BiVO₄ is still poorly understood. Herein, a new and simple synthetic approach was applied and nanostructured single-phase zircon-type BiVO₄ was successfully prepared by a controllable ethylene-glycol colloidal route. In addition, nanostructured monoclinic scheelite-type BiVO₄ powders were also fabricated through annealing of the as-prepared samples. A comparative study of the two BiVO₄ polymorphs was conducted and it turned out that the novel synthetic approach had a significant impact on porosity and photocatalytic performance of zircon-structured BiVO₄. All the prepared materials, as-prepared and annealed, were mesoporous, while measured values of specific surface area of some zircon-structured samples (～34?m²/g) were ～7 times higher than those reported thus far for this phase. Interestingly, for the first time, zircon-type BiVO₄, previously considered to be a poor photocatalyst, exhibited a better overall performance in degradation of methyl orange compared to monoclinic scheelite-type BiVO₄. Hence, it could be expected that the here-presented synthesis and observations will both arouse interest in scarcely studied tetragonal zircon-type BiVO₄ and facilitate as well as speed up further research of its properties.     

Studies of Bainitic Steel for Rail Applications Based on Carbide-Free,Low-Alloy Steel

Metallurgical and Materials Transactions A - This paper describes the development and characterisation of bainitic steel for rail applications based on carbide-free, low-alloy steel. The results...     

Mesenchymal Stromal Cell Therapy in Novel Porcine Model of Diffuse Liver Damage Induced by Repeated Biliary Obstruction

In liver surgery, biliary obstruction can lead to secondary biliary cirrhosis, a life-threatening disease with liver transplantation as the only curative treatment option. Mesenchymal stromal cells (MSC) have been shown to improve liver function in both acute and chronic liver disease models. This study evaluated the effect of allogenic MSC transplantation in a large animal model of repeated biliary obstruction followed by partial hepatectomy. MSC transplantation supported the growth of regenerated liver tissue after 14 days (MSC group, n = 10: from 1087 ± 108 (0 h) to 1243 ± 92 mL (14 days); control group, n = 11: from 1080 ± 95 (0 h) to 1100 ± 105 mL (14 days), p = 0.016), with a lower volume fraction of hepatocytes in regenerated liver tissue compared to resected liver tissue (59.5 ± 10.2% vs. 70.2 ± 5.6%, p < 0.05). Volume fraction of connective tissue, blood vessels and bile vessels in regenerated liver tissue, serum levels of liver enzymes (AST, ALT, ALP and GGT) and liver metabolites (albumin, bilirubin, urea and creatinine), as well as plasma levels of IL-6, IL-8, TNF-α and TGF-β, were not affected by MSC transplantation. In our novel, large animal (pig) model of repeated biliary obstruction followed by partial hepatectomy, MSC transplantation promoted growth of liver tissue without any effect on liver function. This study underscores the importance of translating results between small and large animal models as well as the careful translation of results from animal model into human medicine.     

Untargeted metabolomics reveals links between Tiger nut (Cyperus esculentus L.) and its geographical origin by metabolome changes associated with membrane lipids

Tiger nuts and tiger nut milk are well-known Valencian products, and step-by-step these tubers and the tuber-based beverage are becoming more and more relevant products in international markets. However, the increasing demand and success of Valencian tiger nuts did not allow protected designation of origin (PDO) tuber to supply the domestic and international markets. Therefore, the verification of the geographical origin is highly required. In this research, the main objective was to combine an advance analytical method and chemometrics tools in order to decipher the geographical origin of 45 tiger nut samples from (i) ‘Xufa de València’ PDO and (ii) African samples. The analytical method, based on solid-liquid extraction followed by ultra-high performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS) metabolomics approach, highlighted sensitivity and wide linear dynamic range in order to simultaneously analyse polar and non-polar metabolites. After data processing, a pronounced sample clustering according to the geographical origin was clearly observed using unsupervised models, and supervised models revealed that tiger nuts lipidome was associated with the geographical origin. As a result, African samples highlighted an overexpression of phospholipids, such as phosphatidylethanolamine 34:1, and triacylgricerols crosslinked to environmental stress and alteration of membrane lipid compositions.     

Binding of malaria T cell epitopes to DR and DQ molecules in vitro correlates with immunogenicity in vivo: identification of a universal T cell epitope in the Plasmodium falciparum circumsporozoite protein

The efficacy of a malaria peptide vaccine would be enhanced by the inclusion of a parasite-derived universal T cell epitope to ensure that all vaccinees develop parasite-specific cellular and humoral immunity. Two circumsporozoite (CS) protein T cell epitopes, previously identified by CD4+ T cell clones derived from Plasmodium falciparum sporozoite-immunized volunteers, were studied to determine their HLA class II binding potential. One epitope, located in amino acid (aa) 326-345 of the P. falciparum (NF54 strain) CS protein, was "universal" in that it could bind to multiple DR and DQ molecules in vitro. In contrast, the second epitope, T1, which is located in the CS repeat region, was recognized by T cells in the context of DQ6 (DQB1*0603) and did not bind with high affinity to any of the class II molecules tested in the peptide binding assays. The in vitro patterns of peptide/HLA interactions correlated with immunogenicity in vivo. A multiple antigen peptide (MAP) containing the aa 326-345 epitope elicited responses in eight inbred strains (H-2(a,b,d,k,p,q,r,s)), while the T1 MAP was recognized by only a single haplotype, H-2b. The combination of the universal aa 326-345 T cell epitope and the T1 repeat in a di-epitope MAP overcame the genetic restriction to the P. falciparum CS repeat region and elicited antisporozoite Ab responses in all of the MAP-immunized mice. Synthetic peptide malaria vaccines containing the aa 326-345 universal T cell epitope would be expected to elicit parasite-specific immune responses in both sporozoite-primed and naive individuals of diverse genetic backgrounds.     

A new method in designing compatibility and adhesion of EVA/PMMA blend by using EVA-<Emphasis Type="Italic">g</Emphasis>-PMMA with controlled graft chain length

Atom transfer free radical polymerization (ATRP) was employed in a synthesis of graft polymer EVA-g-PMMA with controlled length of side PMMA chains. Three steps of synthesis: partial hydrolysis of EVA, esterification with chloroacetyl chloride and ATRP grafting were performed to produce EVAOH, macroinitiator EVACl and grafted polymers G8020 (EVA/PMMA?=?80/20 wt%) and G6040 (EVA/PMMA?=?60/40 wt%). FTIR, Raman and NMR spectroscopy were used in the determination of the chemical structure and modification of EVA. Transmitted light and dark field microscopy showed higher affinity for coil formation of EVA-g-PMMA with longer PMMA side chains, i.e. G6040 compatibilizer. Morphological, thermal and adhesive properties of optical fiber adhesives of graft polymers and polymer blends poly(ethylene-co-vinyl acetate)-blend-poly(methyl methacrylate) (EVA/PMMA) compatibilized with 1 wt% of EVA-g-PMMA, were studied. Image analysis of SEM micrographs showed effective compatibilization with short grafted chains (G8020) that was indicated by lower porosity characteristics. TG/DTG analysis enabled determination of degree of hydrolysis and amount of chloro-functionalized groups. DSC analysis showed higher thermal stability of G8020 polymer. Single lap joint of adhesives/optical fibers were subjected to adhesive testing and obtained results for maximal force applied and adhesive failure suggested the visible influence of the length of graft chains on adhesion.     

A new approach to evaluating the toxicity and genotoxicity of disinfected drinking water

The aim of this study was to evaluate the formation of toxic and genotoxic compounds in surface drinking waters treated with two widely used disinfectants, sodium hypochlorite (NaClO) and chlorine dioxide (ClO(2)), and a new disinfectant, peracetic acid (PAA). For this purpose a pilot plant was set up to add these biocides continuously to pre-filtered lake water flowing into three different basins. During three seasonal experiments, short-term in vivo tests (with plant, fish and molluscs) and in vitro tests (with bacteria, yeast and human cells) were carried out to evaluate the formation of genotoxic disinfection by-products (DBPs). Gas chromatography/mass spectrometry (GC/MS) was used to identify DBPs produced during the different treatments, microbiological analyses were performed to test the biocidal activity of the disinfectants, and chemical analyses were carried out to evaluate the quality of the water. The pilot drinking water plant under study was useful in studying the toxicity and genotoxicity of disinfected drinking water with this combined chemical/biotoxicological approach. This paper describes the setting up of the pilot plant and sets out/reports the results of the microbiological and chemical analyses.