Silver (Ag) as a novel masking material in glass etching for microfluidics applications

In this paper, we report the use of a single masking film for deep glass etching in hydrofluoric acid (HF). Thin film silver (Ag) is the key masking material in this work enabling a simple and low cost fabrication of microfluidic structures. The Ag film was deposited by evaporation and etched in a diluted nitric acid and de-ionized water solution at a ratio of 1:3. Surface morphology for different thicknesses of Ag film and its correlation to the maximum achievable etch depth is analyzed. AFM results shows low roughness values (<5 nm), indicating the Ag films are of smooth surface. With a 100 nm Ag film, a 220 μm etch depth in borosilicate glass substrates were produced and by further thickening the Ag to 300 nm, etch depths exceeding 300 μm were successfully achieved. SEM images show that thinner Ag films are of finer grains, potentially a source for pinholes formation where rapid penetration of HF along the grain boundaries peels off the Ag film from the glass surface. However, the Ag film was found not to react with HF. The process was demonstrated in the fabrication of cavities for integration with other microfluidic devices.     

Polymer electrolyte membrane modification in direct ethanol fuel cells: An update

Direct ethanol fuel cells (DEFCs) offer a high degree of design flexibility, ranging from a single cell to a massive multi-cell that can be used in various applications, including portable devices, transportation, and stationary applications. Unfortunately, the most significant barrier to the commercialization of DEFCs is getting low-cost and ethanol permeability, high conductivity performance, and extended durability of polymer electrolyte membranes, as key components that highly influence the overall performance. In this paper, the recent progress in developing the polymer electrolyte membrane for the application of DEFCs has been comprehensively reviewed. Focusing on an updated modification of polymeric materials in the last 5 years, including Nafion-based membrane, polyvinyl alcohol-based membrane, polybenzimidazoles-based membrane, chitosan-based membrane, and sodium alginate-based membrane, as well as factors and challenges that affected the performance of polymer electrolyte membranes have been discussed, including the main characterization, catalyst selection, cell design, and work in membrane and cell performance of DEFCs. All discussion addresses the strategy to improve the performance of polymer electrolyte membranes in DEFCs in order to penetrate the commercialization stages.     

Optimizing natural rubber blends for examination gloves: Vacuum radiation for mechanical strength and solvent barrier

Natural rubber (NR) is emblematic of sustainability compared to synthetic rubber. However, the tradition of adding sulfur as a vulcanization ingredient results in the release of toxic substances and the potential for health issues. In this study, a feasible strategy was proposed to replace sulfur and discover a safe bulk modification process for NR films. The results have shown that the NR particle size was disintegrated to below 10 nm by gamma irradiation. High tension strength up to 24.45 MPa was observed in the vulcanized NR blend film, which could be elongated up to 800% strain after exposure to an optimum dose of 14 kGy. In comparison to commercial NR latex and nitrile gloves, the vulcanized NR/ SIS films exhibited better chemical resistance ability against hexane, methanol, toluene, and acetone, as revealed by the permeation test. The appearance of amorphous regions and highly oriented NR crystallites was observed through transmission electron microscopy. Findings from this study propose the vacuum radiation strategy that can replace conventional vulcanization methods, resulting in NR films with high mechanical and barrier performance. Furthermore, the emission of toxic substances is reduced by this green process, making it practically useful for potential chemical-resistant examination glove applications.     

Changes in selected quality characteristics of minimally processed carambola (Averrhoa carambola L.) when treated with ascorbic acid

‘B 10’ carambola of ripening stage (RS) 3 and 4 were minimally processed (MP) and then dipped in 0, 15 and 30 mg L^?1 ascorbic acid (AA). The 1‐cm‐thick slices were then dried, packed into cling‐wrapped‐foam tray and stored at 7 °C for 0, 3 and 5 days. Skin colour (L*, C* and h°), flesh firmness, soluble solids concentration, vitamin C content, titratable acidity, pH, degree of browning, polyphenoloxidase (PPO) activity and sensory attributes of MP carambola treated with AA were determined. AA treatment had significant effect in decreasing cut surface browning degree but no significant effect on all the selected quality characteristics of the MP carambola. In the sensory evaluation, flesh colour, sweetness, flavour and overall taste were significantly affected by AA treatment especially at 15 mg L^?1. The RS of fruit significantly affected skin colour (C* and h°), pH and sensory attributes of colour and flavour of the MP carambola. As storage day (SD) progressed, skin colour (C* and h°), flesh firmness and vitamin C content, cut surface browning, PPO activity and all the sensory attributes of MP carambola decreased significantly. Flesh firmness of the MP carambola was affected by the interaction between AA × SD. Sensory attributes of MP carambola were affected significantly by AA × RS. All the sensory attributes of MP carambola positively correlated to each other but negatively correlated with browning degree. PPO activity positively correlated with browning degree. Copyright © 2007 Society of Chemical Industry     

Formulation Optimization of a Palm-Based Nanoemulsion System Containing Levodopa

Response surface methodology (RSM) was utilized to investigate the influence of the main emulsion composition; mixture of palm and medium-chain triglyceride (MCT) oil (6%–12% w/w), lecithin (1%–3% w/w), and Cremophor EL (0.5%–1.5% w/w) as well as the preparation method; addition rate (2–20 mL/min), on the physicochemical properties of palm-based nanoemulsions. The response variables were the three main emulsion properties; particle size, zeta potential and polydispersity index. Optimization of the four independent variables was carried out to obtain an optimum level palm-based nanoemulsion with desirable characteristics. The response surface analysis showed that the variation in the three responses could be depicted as a quadratic function of the main composition of the emulsion and the preparation method. The experimental data could be fitted sufficiently well into a second-order polynomial model. The optimized formulation was stable for six months at 4 °C.     

Supercritical CO2 extraction of pigment components with pharmaceutical importance from Chlorella vulgaris

BACKGROUND: Chlorella vulgaris is a green microalgae that contains various pigment components of carotenoids and chlorophylls. Supercritical CO₂ is widely used for extraction of pharmaceutical compounds because it is non‐oxic and easily separated from extracted material by simply depressurizing. In this work, pharmaceutical compounds from Chlorella vulgaris have been extracted using supercritical CO₂ with or without entrainer at various extraction conditions. RESULTS: Based on high performance liquid chromatography (HPLC) analysis, the extracts contained pigment components, such as lutein, β‐carotene, chlorophyll a and b. Higher extraction pressure and temperature promoted higher lutein extraction by supercritical CO₂. The optimum pressure and temperature for extraction were obtained as 50 MPa and 80 °C. Ethanol as an entrainer was more effective than acetone for the extraction of pigment components. Pigment components in the extract obtained by supercritical CO₂ with and without entrainer were compared with the extract obtained by a conventional extraction method. CONCLUSION: Supercritical CO₂ has been successfully applied for the extraction of pigment components from Chlorella vulgaris. Supercritical CO₂ enabled high selectivity for lutein extraction; however, the lutein yield was lower than that obtained by extraction using supercritical CO₂ with ethanol and soxhlet. Copyright © 2008 Society of Chemical Industry     

Resonance condition of a microfiber knot resonator immersed in liquids

Effects of immersing a microfiber knot resonator (MKR) in liquid solutions that have refractive indices close to that of silica are experimentally demonstrated and theoretically analyzed. Significant improvement in resonance extinction ratio within 2 to 10 dB was observed. To achieve a better understanding, a qualitative analysis of the coupling ratio and round-trip attenuation of the MKR is performed by using a curve-fitting method. It was observed that the coupling coefficient at the knot region increased when immersed in liquids. However, depending on the initial state of the coupling and the quantity of the increment in the coupling coefficient when immersed in a liquid, it is possible that the MKR may experience a deficit in the coupling parameter due to the sinusoidal relationship with the coupling coefficient.     

Effects of rf power on the structural properties of carbon nitride thin films prepared by plasma enhanced chemical vapour deposition

Carbon nitride (CN_x) thin films were deposited by radio frequency plasma enhanced chemical vapour deposition (rf PECVD) technique from a gas mixture of methane (CH₄), hydrogen (H₂) and nitrogen (N₂). The effects of rf power on the structural properties of CN_x thin films were discussed in this paper. It was found that rf power had significant effects on the growth rate, structural and morphological properties of the deposited films. The point of transition of the growth rate trend marked the equilibrium condition for primary and secondary reactions in growth kinetics of the film with respect to rf power. The films grown at this optimum rf power were most ordered in structure with high surface roughness and had the lowest N incorporation. This work showed that H etching effects and ion bombardment effects increase with increase in rf power and strongly influenced the structure of the CN_x films.     

Performance of Object Classification Using Zernike Moment

Moments have been used in all sorts of object classification systems based on image. There are lots of moments studied by many researchers in the area of object classification and one of the most preference moments is the Zernike moment. In this paper, the performance of object classification using the Zernike moment has been explored. The classifier based on neural networks has been used in this study. The results indicate the best performance in identifying the aggregate is at 91.4% with a ten orders of the Zernike moment. This encouraging result has shown that the Zernike moment is a suitable moment to be used as a feature of object classification systems.