The role of Al and Mg in the hydrogen storage of electrospun ZnO nanofibers

Pure and doped ZnO nanofibers with Al and Mg were successfully synthesized via an electrospinning method using a sol–gel containing Polyvinylpyrrolidone as a spinning aid and a zinc nitrate precursor. Calcination of the doped and undoped electrospun nanofibers was conducted at 500 °C in air, and the resultant structures were analyzed by X-ray diffraction (XRD) and Raman spectroscopy. The diameter of the doped nanofibers decreased with increasing viscosity and conductivity, as measured by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Energy dispersive spectroscopy (EDS) showed that Mg and Al are present in ZnO nanofibers. The pressure composition isotherm (PCI) demonstrated that the capacity of hydrogen storage in pure zinc oxide nanofibers is a factor of two greater than that of zinc oxide nanoparticles. However, Al-doped ZnO nanofibers have the highest capacity of hydrogen storage (2.81 wt%) at room temperature.     

The Potential Source of B. licheniformis Contamination During Whey Protein Concentrate 80 Manufacture

The objective of this study was to determine the possible source of predominant Bacillus licheniformis contamination in a whey protein concentrate (WPC) 80 manufacturing plant. Traditionally, microbial contaminants of WPC were believed to grow on the membrane surfaces of the ultrafiltration plant as this represents the largest surface area in the plant. Changes from hot to cold ultrafiltration have reduced the growth potential for bacteria on the membrane surfaces. Our recent studies of WPCs have shown the predominant microflora B. licheniformis would not grow in the membrane plant because of the low temperature (10 °C) and must be growing elsewhere. Contamination of dairy products is mostly due to bacteria being released from biofilm in the processing plant rather from the farm itself. Three different reconstituted WPC media at 1%, 5%, and 20% were used for biofilm growth and our results showed that B. licheniformis formed the best biofilm at 1% (low solids). Further investigations were done using 3 different media; tryptic soy broth, 1% reconstituted WPC80, and 1% reconstituted WPC80 enriched with lactose and minerals to examine biofilm growth of B. licheniformis on stainless steel. Thirty‐three B. licheniformis isolates varied in their ability to form biofilm on stainless steel with stronger biofilm in the presence of minerals. The source of biofilms of thermo‐resistant bacteria such as B. licheniformis is believed to be before the ultrafiltration zone represented by the 1% WPC with lactose and minerals where the whey protein concentration is about 0.6%.     

A literatu rereview on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region

Increase of indoor temperature compared with outdoor temperature is amajor concern in modern house design. Occupants suffer from this uncomfortable condition because of over-heating indoor temperature. Poor passive design causes heat to be trapped, which influences the rise in indoor temperature. The upper part, which covers the area of the roof, is the most critical part of the house that is exposed to heat caused by high solar radiation and high emissivity levels. During daytime, the roof accumulates heat, which increases the indoor temperature and affects the comfort level of the occupants. To maintain the indoor temperature within the comfort level, most house designs usually depend on mechanical means by using fans or air conditioning systems. The dependence on amechanical ventilation system could lead to additional costs for itsinstallation, operation, and maintenance. Thus, this study concentrates on reviews on passive design and suggests recommendations for future developments. New proposals or strategies are proposed to improve the current passive design through ventilated and cool roof systems. It is possible to achieve the comfort level inside a house throughout the day by reducing the transmitted heat into the indoor environment and eliminating the internal hot air. These recommendations could become attractive strategies in providing a comfortable indoor temperature to the occupants as well as inminimizing energy consumption.     

The development of FtsZ inhibitors as potential antibacterial agents

The emergence and prevalence of bacterial resistance has resulted in a clear demand for novel antibacterial drugs. As a tubulin homologue, FtsZ is an essential cell-division protein in prokaryotic organisms and is showing increasing promise as a target for antibacterial drug discovery. This review describes the role of FtsZ in bacterial cytokinesis and various FtsZ inhibitors, with particular focus on their discovery, antibacterial activities, mechanisms of action, synthetic methods, and representative analogues.     

Influence of Solvent Polarity and Conditions on Extraction of Antioxidant,Flavonoids and Phenolic Content from A verrhoa bilimbi

This paper presents the influence of solvent polarity and extraction conditions on the extraction of total flavonoid, total phenolic and antioxidants from Averrhoa bilimbi. The experiment was performed using a different solvent at different extraction conditions, including extraction time （15-240 min）, temperature （30-70 ℃） and agitation speed （50-300 rpm）. Results showed that yields of extraction varies with solvent polarity. Extraction using 50% aqueous methanol gives the highest antioxidant activity and flavonoid content. The highest total flavonoid content （193.3 μg quercetin equivalent/g dry weight）, total phenolic content （717.8 μg gallic acid equivalent/g dry weight） and antioxidant activity （77%） was achieved using 50% methanol, at 70 ℃ and agitation speed of 300 rpm. This work may be useful for obtaining higher bioactive compounds during the extraction process of A. bilimbi.     

Antioxidant protective effect of honey in cigarette smoke-induced testicular damage in rats

Cigarette smoke (CS) can cause testicular damage and we investigated the possible protective effect of honey against CS-induced testicular damage and oxidative stress in rats. CS exposure (8 min, 3 times daily) and honey supplementation (1.2 g/kg daily) were given for 13 weeks. Rats exposed to CS significantly had smaller seminiferous tubules diameter and epithelial height, lower Leydig cell count and increased percentage of tubules with germ cell loss. CS also produced increased lipid peroxidation (TBARS) and glutathione peroxidase (GPx) activity, as well as reduced total antioxidant status (TAS) and activities of superoxide dismutase (SOD) and catalase (CAT). However, supplementation of honey significantly reduced histological changes and TBARS level, increased TAS level, as well as significantly restored activities of GPx, SOD and CAT in rat testis. These findings may suggest that honey has a protective effect against damage and oxidative stress induced by CS in rat testis.     

Selective formation of tungsten nanowires

We report on a process for fabricating self-aligned tungsten (W) nanowires with polycrystalline silicon core. Tungsten nanowires as thin as 10 nm were formed by utilizing polysilicon sidewall transfer technology followed by selective deposition of tungsten by chemical vapor deposition (CVD) using WF6 as the precursor. With selective CVD, the process is self-limiting whereby the tungsten formation is confined to the polysilicon regions; hence, the nanowires are formed without the need for lithography or for additional processing. The fabricated tungsten nanowires were observed to be perfectly aligned, showing 100% selectivity to polysilicon and can be made to be electrically isolated from one another. The electrical conductivity of the nanowires was characterized to determine the effect of its physical dimensions. The conductivity for the tungsten nanowires were found to be 40% higher when compared to doped polysilicon nanowires of similar dimensions.     

Monomer sequence of partially hydrolyzed poly(4-tert-butoxystyrene) and morphology of diblock copolymers composing this polymer sequence as one block

The molecular characteristics of poly(4-tert-butoxystyrene) (O) upon hydrolysis reaction were investigated. It is known that O can be converted into poly(4-hydroxystyrene) (H) through hydrolysis reaction using strong acid. In this study, a set of poly(4-tert-butoxystyrene-co-4-hydroxystyrene)s (O/H copolymers) having various conversion rates, f_Hs, were prepared. Hydrolysis reaction is found to occur uniformly by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) where the average f_H obtained was consistent with that from ¹H NMR though a certain distribution in the number of hydrolyzed units was conceived. Monomer sequence of O/H copolymers was determined by ¹³C NMR and the changes in triad concentration were obtained by spectra subtraction method. As a result, ¹³C NMR reveals that O and H are statistically distributed. To evaluate the effect of hydrolysis on microphase-separated structure, we observed the morphology of partially hydrolyzed poly(4-tert-butylstyrene-block-4-tert-butoxystyrene) (BO) by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS). Samples with f_H from 0.21 to 0.67 form both lamellar (major component) and cylindrical (minor component) structures reflecting both the statistical manner of hydrolysis reaction and the possible localized distribution of H sequence.