Internal oxidation of Ag–VC composites

The internal oxidation (IO) of Ag–VC composites containing 5 vol.% of carbide was examined at three oxidation temperatures (350, 400, 600 °C). Two mechanisms were observed due to the formation of double oxides with relatively low-melting points. At temperatures below the lowest eutectic point in situ, or diffusion less IO, was observed with the formation and growth of oxide layers surrounding the initial carbide. At temperatures above the eutectic point IO resulted in the formation of liquid oxide pools, which grew in size and developed into a network of oxides within the metal matrix. The kinetics confirmed the presence of two distinct mechanisms.     

Synthesis and biological activities of a new set of irreversibly acting 2-(4'-isothiocyanatobenzyl)imidazoline analogs in rat thoracic aorta

IBI [2-(4'-isothiocyanatobenzyl)imidazoline, 3] has been shown to cause slow-onset, long-lasting contractions of rat thoracic aorta through a non-alpha-adrenergic receptor (non-alpha-AR) mediated mechanism. A series of IBI-related anlogs 7-14 and 16 was prepared to determine the structural requirements for the interaction with non-alpha-AR in rat aortic strips. All IBI analogs produced concentration-dependent contractile responses on rat thoracic aorta. Whereas the actions of analogs 7, 14, and 16 were partly mediated by alpha-ARs, the stimulatory activities of the remaining IBI analogs were unaffected by phenoxybenzamine pretreatment, suggesting that a non-alpha-adrenergic mechanism is involved. We have shown that the contractile actions of IBI and analogs 10-13 were not blocked with the imidazoline/guanidinium receptive site (IGRS) ligands idazoxan, cirazoline, or clonidine. However, the calcium channel blockers nifedipine or verapamil shifted the concentration-response curve of IBI and its analogs 10-13 to the right and reduced the maximal contractile responses. The action of IBI on rat thoracic aorta was reduced by the omission of extracellular calcium in the medium. These results suggest that the stimulatory activities of IBI and analogs 10-13 are not related to the activation of alpha-AR or IGRS receptors and are likely coupled to the voltage-dependent Ca2+ channels.     

The relationship between the effective current density and the effective overpotential in copper deposition by the pulsating potential

The relationship between the effective current density and the effective overpotential in copper deposition by pulsating potential has been established experimentally. It has been shown that due to non-linearity of the steady state polarization curve, the value of the effective current density is not dependent on the value of the effective overpotential only, but on the ratio between the pulse and the pause duration too. Effective values of current density for the constant pulse-to-pause ratio are functions of the input pulsating potential frequency for a given value of the effective overpotential.When a frequency dependence of effective values has been experimentally studied it has been found that the effective current density at a given constant value of the effective overpotential is a function with a maximum, while the effective overpotential at a given constant value of the effective current density is a function with a minimum. Digital simulation of copper deposition by the pulsating potential gave qualitatively the same picture. Discussion of phenomena has been presented.     

Functional properties of pea (Pisum sativum, L.) protein isolates modified with chymosin

In this paper, the effects of limited hydrolysis on functional properties, as well as on protein composition of laboratory-prepared pea protein isolates, were investigated. Pea protein isolates were hydrolyzed for either 15, 30 and 60 min with recombined chymosin (Maxiren). The effect of enzymatic action on solubility, emulsifying and foaming properties at different pH values (3.0; 5.0; 7.0 and 8.0) was monitored. Chymosin can be a very useful agent for improvement of functional properties of isolates. Action of this enzyme caused a low degree of hydrolysis (3.9-4.7%), but improved significantly functional properties of pea protein isolates (PPI), especially at lower pH values (3.0-5.0). At these pH values all hydrolysates had better solubility, emulsifying activity and foaming stability, while longer-treated samples (60 min) formed more stable emulsions at higher pH values (7.0, 8.0) than initial isolates. Also, regardless of pH value, all hydrolysates showed improved foaming ability. A moderate positive correlation between solubility and emulsifying activity index (EAI) (0.74) and negative correlation between solubility and foam stability (-0.60) as well as between foam stability (FS) and EAI (-0.77) were observed. Detected enhancement in functional properties was a result of partial hydrolysis of insoluble protein complexes.     

Dielectric properties of epoxy/graphite flakes composites: Influence of loading and surface treatment

Epoxy-rich carbon-based composites are well recognized materials in industries owing to their good mechanical properties and thermal stability. Here, dielectric properties of composites based on bisphenol-A-epoxy resin loaded with 5, 6, 10, and 15 wt% of graphite flakes (GF) have been studied. The frequency and temperature dependence of the dielectric permittivity, dielectric loss, and ac conductivity have been examined in temperature (−103 to 97°C) and frequency (20 Hz–200 kHz) range. Influence of the filler surface chemistry have been studied for composites loaded with 5 wt% GF obtained: (i) under wet milling, without or with adding Triton-100x as a surfactant, or (ii) under dry milling in the presence of KOH. The composite made of epoxy loaded with 5 wt% exfoliated expanded graphite flakes (EEG), was also prepared. The surface treatment with KOH notably increased dielectric constant of the composite, keeping low dielectric loss, while treatment with Triton-100x significantly increased tanδ. The composite loaded with exfoliated expanded graphite shows higher ac conductivity than those obtained with flaky graphite, GF. Possibility to change dielectric properties of the composites without changing the loading content can be used as an approach in tailoring one with desired dielectric properties.     

Modelling of chemical surface acoustic wave sensors and comparative analysis of new sensing materials

Comparative analysis of different, new gas sensing materials in surface acoustic wave chemical sensors is presented. Different gas sensing materials as polyaniline (PANI), Teflon AF 2400, polyisobutylene (PIB), polyepichlorohydrin (PECH) are considered. They are chosen according to the type of gas to be detected and the desired accuracy: Teflon AF 2400 thin film for the detection of CO₂, PANI nanocomposites film that belongs to the group of conductive polymers for the detection of CO, NO₂ and phosgene (COCl₂), and PECH and PIB for the detection of dichloromethane (CH₂Cl₂, DCM). In the analysis, the simple and useful method of the complete analyses of gas chemical sensors is used. The method is based on the electrical equivalent circuit of the surface acoustic wave sensor. The method is very efficient and can be used for the optimal design of CO₂ sensors. The results are compared with those presented in public literature and good agreement is obtained, demonstrating the validity of modelling. Copyright © 2012 John Wiley & Sons, Ltd.     

Policies for allocating performance impairment budgets among multiple IP providers

An important technical aspect of achieving end-to-end quality of service (QoS) in next generation networks refers to allocation of the total performance impairment budget (delay, jitter, packet loss) among multiple providers. In this article, we first propose a generic policy for allocating per-domain impairment budgets, relying on the set of performance metrics from service request and the rules for their composition on the multi-domain path. The objective is to provide end-to-end QoS through the set of heterogeneous domains, with different QoS models and definitions of service classes. The allocation of impairment budgets among multiple domains is then closely related to mapping of service classes between providers and selection of the most appropriate class for particular service in each domain. Based on the generic policy, we further derive examples of specific policies and evaluate them with respect to fulfillment of QoS objectives, fairness, adaptability and scalability. Evaluation tool implements a policy-based conformance matching scheme, which enforces selection of the domain class that most tightly matches with the required QoS.     

Chemical composition and antioxidant and antimicrobial activities of essential oil of Allium sphaerocephalon L. subsp. sphaerocephalon (Liliaceae) inflorescences

BACKGROUND: Allium sphaerocephalon is a wild‐growing plant commonly used as an onion substitute. In this study the essential oil obtained from A. sphaerocephalon subsp. sphaerocephalon inflorescences was analysed by gas chromatography and gas chromatography/mass spectrometry and also evaluated for in vitro antioxidant and antimicrobial activities. The obtained results are reported for the first time and discussed with respect to the sulfur compounds detected in the essential oil. RESULTS: Ninty‐one compounds were identified, representing 91.6% (w/w) of the total oil. Major constituents of the analysed sample were shyobunol (15.3%), β‐caryophyllene (8.1%), α‐cadinol (7.8%), 3,5‐diethyl‐1,2,4‐trithiolane (isomer II, 5.9%) and δ‐cadinene (5.2%). The diluted oil had an antioxidant capacity of 160 000 ± 111 µmol α‐tocopherol acetate equivalents g^?1. Its antimicrobial activity was evaluated against five bacterial and two fungal strains using the broth microdilution assay. Among the micro‐organisms tested, the most susceptible strains were Pseudomonas aeruginosa (minimal inhibitory/bactericidal concentration = 0.08/2.5 mg mL^?1) and Aspergillus niger (minimal inhibitory/fungicidal concentration = 0.31/0.63 mg mL^?1). CONCLUSION: The results showed that the examined species had strong antioxidant and antimicrobial properties and are in accordance with the popular use of plants belonging to the genus Allium in traditional medicine, emphasising the necessity of further detailed study of the active principles in Allium species. Copyright © 2010 Society of Chemical Industry     

A Fungal N‐Dimethylallyltryptophan Metabolite from Fusarium fujikuroi

The range of secondary metabolites (SMs) produced by the rice pathogen Fusarium fujikuroi is quite broad. Several polyketides, nonribosomal peptides and terpenes have been identified. However, no products of dimethylallyltryptophan synthases (DMATSs) have been elucidated, although two putative DMATS genes are present in the F. fujikuroi genome. In this study, the in vivo product derived from one of the DMATSs (DMATS1, FFUJ_09179) was identified with the help of the software MZmine 2. Detailed structure elucidation showed that this metabolite is a reversely N‐prenylated tryptophan with a rare form of prenylation. Further identified products probably resulted from side reactions of DMATS1. The genes adjacent to DMATS1 were analyzed; this showed no influence on the biosynthesis of the product.