Non-contact methods of measuring moisture concentration in external layers of building partitions II—Monitoring of the water vapour condensation on porous surfaces

This paper present the results of the investigation into a potential application of laser radiation for the detection of phase transition processes occurring on the surface layers of porous materials. An attempt was made to discuss in the approximation equations, the relationships between coefficients of the reflected light, the temperature and humidity of the surrounding environment. Laser light reflected from the porous surface carries information about the roughness of the structure. The presence of water microdrop on the surface of the porous material, as a result of condensation and thus a phase transition, leads to the phase displacement of individual rays, which is represented by different images. Therefore, a comprehensive analysis of the reflected light parameters allows a dynamic study of the phase transition phenomena without mechanical intervention.     

An experimental study of a cross-flow type plate heat exchanger for dehumidification/cooling

The thermal and dehumidification behaviour of a standard cross-flow type plate heat exchanger, intended for use as a dehumidifier/cooler, has been investigated both experimentally and numerically. Three sets of experiments have been carried out where air is blown into the primary and secondary sides of the exchanger, while water and liquid desiccant were being sprayed in a counter flow arrangement. The first set represents the indirect evaporative cooling of the primary stream by the secondary air stream. The second set is with liquid desiccant only and no indirect evaporative cooling. In the third set of experiments the primary air stream is indirectly evaporatively cooled by the secondary air stream and dehumidified by the liquid desiccant sprayed into the primary side of the exchanger. The above experiments indicate that the heat exchanger performs well when used with liquid desiccant. Furthermore, for an exchanger angle of 45°, there is an optimum value of air mass flow rate at which the effectiveness and dehumidification efficiency of the plate heat exchanger are maxima. To investigate the effect of the ambient air conditions on the PHE performance, further experiments were carried out using a heater element and a humidifier. The results show that under laboratory conditions the exchanger effectiveness and dehumidification efficiency increase with increasing primary air inlet temperature and humidity ratio. The experimental results were used to validate a computer model developed for the cross-flow type plate heat exchanger/dehumidifier. Comparison indicates that the numerical results are in good agreement with the experiments.     

数值地形图的生成及其水文地貌特征评价

数值地形图(DEM)是利用地理信息系统(GIS)进行流域水文模拟的基础, 其精度直接影响模拟结果在没有现成的数值地形图时, 应用人员往往利用传统的地形图来生成它. 本文分别采用Arc/Info地理信息系统软件提供的哈奇逊法和不规则三角网五次插值法, 对一个实验流域的高程取样点进行插值, 生成了4种不同的数值地形图, 从凹洼分布、流域界定、河网提取、地面坡度和地形指数、以及地面径流汇成等方面, 对它们的水文地貌精度进行了比较. 结果表明, 两种方法都能生成由高程点群所反映的地形, 然而由于哈奇逊法能够结合流域的河网结构及其具有物理基础的水文地貌加强法来处理凹洼问题, 因此大大地提高了其所生成的流域数值地形图水文地貌特征精度.     

Recursive solution of inverse natural convection problems by means of mode reduction

 A recursive method based on the Kalman filtering is developed to solve inverse natural convection problems of estimating the unsteady nonuniform wall heat flux from temperature measurements in the flow. By employing the Karhunen–Loève Galerkin procedure that reduces the Boussinesq equation to a small set of ordinary differential equations, the computational difficulties associated with the Kalman filtering for the partial differential equations are overcome. The present method is assessed through several numerical experiments, and is found to yield satisfactory results. Received 20 January 2001 / Accepted 31 May 2001     

Erythrocyte sodium lithium countertransport in normal and hypertensive pregnancy: relation to haemodynamic changes

OBJECTIVE: To establish the changes in erythrocyte sodium lithium countertransport (SLC) with advancing normal pregnancy and to determine if these changes were different in pregnancy induced hypertension (PIH). The changes in both groups were assessed in relation to haemodynamic changes. DESIGN: SLC, mean arterial pressure (MAP), cardiac output (CO) and total peripheral vascular resistance (TPVR) were determined serially during normal pregnancy and cross-sectionally in PIH. Women were studied again 20 weeks after delivery where possible. SETTING: Routine antenatal clinic and antenatal ward of a regional reference centre. SUBJECTS: Fifty-one normal primigravid women were studied serially and 41 primigravid women with PIH were studied at time of diagnosis. RESULTS: During normal pregnancy SLC (mmol Li/h/l cells) increased from a nonpregnant value of 0.24 +/- 0.02 (mean +/- SEM) to 0.32 +/- 0.02 at 14 weeks, and 0.37 +/- 0.02 at 20 weeks gestation. This was maintained until 38 weeks (0.40 +/- 0.02). The increase until 20 weeks occurred at the time of greatest change in CO (5.10 +/- 0.18 to 6.79 +/- 0.20 l/min) and TPVR (1327 +/- 58 to 969 +/- 33 dyn/s/cm-5). The decrease in TPVR with a rise in SLC is opposite to the relation reported in essential hypertension so that a functional relation is unlikely. However, the changes within pregnancy were positively correlated (r = 0.43, P < 0.01). In hypertensive pregnancies TPVR was elevated compared with normotensive pregnancies (1543 +/- 100 vs 1090 +/- 37) but the SLC was not different from that found in normotensive pregnancies (0.43 +/- 0.02 vs 0.40 +/- 0.02). CONCLUSIONS: The changes in SLC activity suggest dynamic effects on erythrocyte membrane function during pregnancy. However, no differences could be found between normal and hypertensive pregnancy and SLC is unlikely to be of value as a marker of hypertensive risk during pregnancy.     

Molecular analysis of cellulose biosynthesis in Arabidopsis

Cellulose, an abundant, crystalline polysaccharide, is central to plant morphogenesis and to many industries. Chemical and ultrastructural analyses together with map-based cloning indicate that the RSW1 locus of Arabidopsis encodes the catalytic subunit of cellulose synthase. The cloned gene complements the rsw1 mutant whose temperature-sensitive allele is changed in one amino acid. The mutant allele causes a specific reduction in cellulose synthesis, accumulation of noncrystalline beta-1,4-glucan, disassembly of cellulose synthase, and widespread morphological abnormalities. Microfibril crystallization may require proper assembly of the RSW1 gene product into synthase complexes whereas glucan biosynthesis per se does not.     

Lithographic and pattern transfer of a novel deep-UV photoresist: ARCH2

We have developed a novel chemically amplified deep-UV photoresist called ARCH2. ARCH2 displays a resolution of<0.23μm with a DOF of 1.0μm at 0.25μm. This material also displays superior time delay stability (>8 hours). The post exposure bake (PEB) temperature was varied from 100°C to 120°C and the PEB time was varied from 60s to 180s. This had very little effect on the CD of the resist profiles. Preliminary etching experiments in a conventional reactive ion etcher were then carried out using CF₄ to etch TiN. In these experiments the ARCH2 etched at a similar rate as conventional Novolac.