Mode‐SVD‐Based Maximum Likelihood Source Localization Using Subspace Approach

A mode‐singular‐value‐decomposition (SVD) maximum likelihood (ML) estimation procedure is proposed for the source localization problem under an additive measurement error model. In a practical situation, the noise variance is usually unknown. In this paper, we propose an algorithm that does not require the noise covariance matrix as a priori knowledge. In the proposed method, the weight is derived by the inverse of the noise magnitude square in the ML criterion. The performance of the proposed method outperforms that of the existing methods and approximates the Taylor‐series ML and Cramér‐Rao lower bound.     

A novel hybrid silica wide-band amplifier covering S+C+L bands with 105-nm bandwidth

We report a novel hybrid optical amplifier covering S+C+L bands with 105-nm total bandwidth using a silica fiber. The principle of amplification is based on the stimulated radiative transition of Er-ions for C-band and on the stimulated Raman scattering for S- and L-band, respectively. In this letter, we analyze the amplification characteristics for two types of active fiber mediums through numerical simulation. One is a silica fiber configured with Er-doped cladding and Ge-doped core and the other is a medium consisting of Er-doped fiber and dispersion-compensating fiber. By optimizing parameters such as fiber length and pump power, we newly achieve wide-band amplification with 105-nm bandwidth showing a flat gain characteristic over the entire S+C+L bands.     

Significantly Enhanced Photoluminescence of Doped Polymer‐Metal Hybrid Nanotubes

We report on the significantly enhanced photoluminescence (PL) of hybrid double‐layered nanotubes (HDLNTs) consisting of poly(3‐methylthiophene) (P3MT) nanotubes with various doping levels enveloped by an inorganic, nickel (Ni) metal nanotube. From laser confocal microscopy PL experiments on a single strand of the doped‐P3MT nanotubes and of their HDLNTs, the PL peak intensity of the HDLNT systems increased remarkably up to ～350 times as the doping level of the P3MT nanotubes of the HDLNTs increased, which was confirmed by measurements of the quantum yield. In a comparison of the normalized ultraviolet and visible absorption spectra of the doped‐P3MT nanotubes and their HDLNTs, new absorption peaks corresponding to surface‐plasmon (SP) energy were created at 563 and 615 nm after the nanoscale Ni metal coating onto the P3MT nanotubes, and their intensity increased on increasing the doping level of the P3MT nanotube. The doping‐induced bipolaron peaks of the HDLNTs of doped‐P3MT/Ni were relatively reduced, compared with those of the doped‐P3MT nanotubes before the Ni coating, due to the charge‐transfer effect in the SP‐resonance (SPR) coupling. Both energy‐transfer and charge‐transfer effects due to SP resonance contributed to the very‐large enhancement of the PL efficiency of the doped‐P3MT‐based HDLNTs.     

A 6 Gbps/pin Low‐Power Half‐Duplex Active Cross‐Coupled LVDS Transceiver with Switched Termination

A novel linear switched termination active cross‐coupled low‐voltage differential signaling (LVDS) transceiver operating at 1.5 GHz clock frequency is presented. On the transmitter side, an active cross‐coupled linear output driver and a switched termination scheme are applied to achieve high speed with low current. On the receiver side, a shared preamplifier scheme is employed to reduce power consumption. The proposed LVDS transceiver implemented in an 80 nm CMOS process is successfully demonstrated to provide a data rate of 6 Gbps/pin, an output data window of 147 ps peak‐to‐peak, and a data swing of 196 mV. The power consumption is measured to be 4.2 mW/pin at 1.2 V.     

Fluorinated Polyimide as a Novel High‐Voltage Binder for High‐Capacity Cathode of Lithium‐Ion Batteries

An increase in the energy density of lithium‐ion batteries has long been a competitive advantage for advanced wireless devices and long‐driving electric vehicles. Li‐rich layered oxide, xLi₂MnO₃?(1?x)LiMn_1?y?zNi_yCo_zO₂, is a promising high‐capacity cathode material for high‐energy batteries, whose capacity increases by increasing charge voltage to above 4.6 V versus Li. Li‐rich layered oxide cathode however suffers from a rapid capacity fade during the high‐voltage cycling because of instable cathode–electrolyte interface, and the occurrence of metal dissolution, particle cracking, and structural degradation, particularly, at elevated temperatures. Herein, this study reports the development of fluorinated polyimide as a novel high‐voltage binder, which mitigates the cathode degradation problems through superior binding ability to conventional polyvinylidenefluoride binder and the formation of robust surface structure at the cathode. A full‐cell consisting of fluorinated polyimide binder‐assisted Li‐rich layered oxide cathode and conventional electrolyte without any electrolyte additive exhibits significantly improved capacity retention to 89% at the 100th cycle and discharge capacity to 223–198 mA h g^?1 even under the harsh condition of 55 °C and high charge voltage of 4.7 V, in contrast to a rapid performance fade of the cathode coated with polyvinylidenefluoride binder.     

Anodized Aluminum Oxide/Polydimethylsiloxane Hybrid Mold for Roll‐to‐Roll Nanoimprinting

Two types (hard and soft) of the molds are widely used in nanoimprint lithography for a high throughput over a large area, and high‐resolution parallel patterning. Although hard molds have proven excellent resolutions and can be used at high temperatures, cracks often occur in the mold in addition to the requirement of high imprinting pressure. On the other hand, though soft molds can operate at lower pressures, they give poor pattern resolution. Here, a novel hybrid mold of anodized aluminum oxide (AAO) template attached to a flexible polydimethylsiloxane (PDMS) plate is introduced. Due to the flexible nature of PDMS, various polymer nanostructures are obtained on flat and curved substrates without crack formation on the AAO mold surface. Furthermore, the hybrid mold is successfully used for roll‐to‐roll imprinting for the fabrication of high density array of various shaped polymeric nanostructures over a large area.     

Thermo-Adaptive Block Copolymer Structural Color Electronics

Flexible electronics that enable the visualization of thermal energy have significant potential for various applications, such as thermal diagnosis, sensing and imaging, and displays. Thermo-adaptive flexible electronic devices based on thin 1D block copolymer (BCP) photonic crystal (PC) films with self-assembled periodic nanostructures are presented. By employing a thermo-responsive polymer/non-volatile hygroscopic ionic liquid (IL) blend on a BCP film, full visible structural colors (SCs) are developed because of the temperature-dependent expansion and contraction of one BCP domain via IL injection and release, respectively, as a function of temperature. Reversible SC control of the bi-layered BCP/IL polymer blend film from room temperature to 80 °C facilitates the development of various thermo-adaptive SC flexible electronic devices including pixel arrays of reflective-mode displays and capacitive sensing display. A flexible diagnostic thermal patch is demonstrated with the bi-layered BCP/IL polymer blend enabling the visualization of local heat sources from the human body to microelectronic circuits.     

A Framework for MPEG‐4 Contents Delivery over DMB

Digital Multimedia Broadcasting (DMB) is an upcoming standard in Korea used to provide mobile multimedia broadcasting service based on the Eureka‐147 Digital Audio Broadcasting (DAB) system. The current dominant multimedia coding standard, MPEG‐4, is foreseen to play an important role in forthcoming DMB services. However, the current approaches for transporting MPEG‐4 content over DMB networks are not optimized. To address this issue we propose a novel MPEG‐4 stream multiplexer, called M4SMux, which provides better stream multiplexing and delivery over DMB networks. M4SMux features an MPEG‐4 elementary‐stream interleaving mechanism that reduces the multiplexing overhead and a multiplex configuration mechanism that utilizes M4SLinkTable for easy content access. In addition, we propose an error correction method which enhances transport efficiency.