High temperature oxidation behavior of Ni-Cr-Al based powder porous metal

This study investigated the high temperature oxidation behavior of newly developed Ni-Cr-Al powder porous metal. High temperature isothermal oxidation tests were conducted at 900, 1000 and 1100 °C temperatures for 24 h under an atmosphere of 79% N₂ + 21% O₂ gas. Oxidation weight gain vs. time curves represented typical oxidation behavior of parabolic shape. Weight gain increased with increasing oxidation temperature. Ni-Cr-Al porous metal mainly created oxides such as α-Al₂0₃, Cr₂O₃, NiCr₂O₄. The α-Al₂0₃ oxide could be still maintained up to 1100 °C oxidation temperature as a thick and stable protective layer. It was noted that Ni-Cr-Al porous metal had better high temperature oxidation resistance than those of other Ni-based and Fe-based porous metals. The catastrophic degradation of oxidation resistance especially at very high temperature was not observed up to 1100 °C in this porous metal. The micro-mechanism of high temperature oxidation of Ni-Cr-Al porous metal was also discussed.     

Multi-digit maximum voluntary torque production on a circular object

Individual digit-tip forces and moments during torque production on a mechanically fixed circular object were studied. During the experiments, subjects positioned each digit on a 6-dimensional force/moment sensor attached to a circular handle and produced a maximum voluntary torque on the handle. The torque direction and the orientation of the torque axis were varied. From this study, it is concluded that: (1) the maximum torque in the closing (clockwise) direction was larger than in the opening (counter clockwise) direction; (2) the thumb and little finger had the largest and the smallest share of both total normal force and total moment, respectively; (3) the sharing of total moment between individual digits was not affected by the orientation of the torque axis or by the torque direction, while the sharing of total normal force between the individual digit varied with torque direction; (4) the normal force safety margins were largest and smallest in the thumb and little finger, respectively.     

Thermal conductivity and mechanical properties of various cross-section types carbon fiber-reinforced composites

In this work, to study the characteristics of carbon fiber-reinforced composites with different fiber cross-section types, such as round, C, and hollow-shape, the thermal conductivity and mechanical properties were investigated and compared. The thermal conductivity was measured by means of steady-state method to the parallel and perpendicular direction of reinforcing fibers. The mechanical properties were evaluated by a variety of test methods i.e., flexural, interlaminar shear strength, and impact strength. As a result, it was found that the thermal conductivity was greatly depended on the cross-section type of the reinforcing fibers, as well as, the reinforcing orientation. Especially, the anisotropy factor (k _///k ) and the thermal diffusivity factor (_///) of C and hollow-type carbon fiber-reinforced composites showed about two times higher values than those of round-type one. Also, the mechanical results showed that C and hollow-type carbon fibers-reinforced composites had higher values than those of round-type one in all mechanical tested. These results were probably due to the basic properties of non-circular (C and hollow-type) carbon fiber which can improve interfacial binding forces and widen interfacial contact area between reinforcement and matrix, resulting in effectively transferring the applied stress.     

Effective pedestrian detection using deformable part model based on human model

Recently, pedestrian detection systems have become an important technology in the development of the advanced driver assistance system (ADAS) for the autonomous car. The histogram of oriented gradients (HOG) is currently the most basic algorithm for detecting pedestrians, but it treats the entire body of the pedestrian as one single feature. In other words, if the entire body of the pedestrian is not visible, the detection rate under HOG decreases markedly. To solve this problem, we propose a detection system using a deformable part model (DPM) that divides the pedestrian data into two parts using a latent support vector machine (SVM)-based machine-learning technique. Experimental results show that our approach achieves better performance in a detection system than the existing method. In practice, there are many occlusions in the environment in front of the vehicle. For example, the surrounding transport facilities, such as a car or another obstacle, can occlude a pedestrian. These occlusions can increase the false detection rate and cause difficulties during the detection process. Our proposed method uses a different approach and can easily be applied in real-world scenarios, regardless of occlusions.

     

Short communication: lack of stage-specific embryonic antigen-1 expression by bovine embryos and primordial germ cells

The objective of this study was to determine whether stage-specific embryonic antigen-1, a cellular marker commonly used to identify murine undifferentiated embryonic cells, is also a useful marker for bovine pluripotent cells. Expression of stage-specific embryonic antigen-1 was examined by indirect immunohistochemistry on bovine preimplantation embryos and on primordial germ cells contained in the genital ridge. Expression of stage-specific embryonic antigen-1 was not observed in any of the cleavage-stage bovine embryos examined, including one-cell, two-cell, four-cell, eight-cell, morula, and blastocyst stages, nor in tissue sections of bovine genital ridges collected from embryos on d 34, 37, and 40 of gestation. As expected, expression of stage-specific embryonic antigen-1 was detected on murine preimplantation embryos and on murine teratocarcinoma cells. Results of this study indicate that, unlike in the mouse, stage-specific embryonic antigen-1 is not a useful cellular marker for pluripotent bovine embryonic cells or bovine primordial germ cells.     

Acicular ferrite microstructure in titanium bearing low carbon steels

Abstract

Different microstructures having acicular ferrite as the major phase but with various types and amounts of microphases were obtained by applying different cooling processes to C–Mn steels containing fine non-metallic inclusions. Optical and electron microscopy were carried out to identify the various microphases in the acicular ferrite microstructure, and their mechanical properties were measured and compared to study the effect of the microphases on the microstructure–properties relationship in C–Mn wrought steels. The existence and increase of the fraction of small isolated martensite between the acicular ferrite laths were found to play an important role in determining the tensile strength and low temperature impact toughness of the steels. However, the elongation and room temperature impact toughness were rather insensitive to the microphases. This may be attributed to the uniform distribution and isolation of relatively small martensite due to the fine interlocking character of the acicular ferrite microstructure.     

Oxidative and color stability of cooked ground pork containing lotus leaf (Nelumbo nucifera) and barley leaf (Hordeum vulgare) powder during refrigerated storage

This study aimed to evaluate the oxidative and color stability of cooked ground pork containing lotus leaf powder at 0.1 (LP1) and 0.5% (LP2) as well as barley leaf powder at 0.1 (BP1) and 0.5% (BP2) during refrigerated storage for 10 days. The oxidative stability of these powders was compared with butylhydroxytoluene (BHT). LP1 had higher a* and lower b* values than the control (-) over 4 days (p<0.05). The pH values of the ground pork samples made with addition of LP and BHT decreased until day 4 and then increased. Thiobarbituric acid-reactive substance (TBARS) values were lowest in LP2 on day 10 (p<0.05). The ground pork samples containing LP and BP had lower peroxide values (POVs) and conjugated dienes (CD) compared to the control (-).These results indicate that LP or BP can be incorporated into ground pork to effectively retard oxidation after cooking.     

Fractal analysis of pressure fluctuations in a three phase bubble column reactor operating at low pressure

Pressure fluctuations in a three phase bubble column reactor operating at relatively low pressure (92 KPa) have been analyzed by adopting the spectral and fractal analyses to get the engineering informations for the on-line control and fault diagnosis of the reactors. The mean value, standard deviation, skewness and kurtosis of the pressure fluctuations have been obtained. The local fractal dimension has been determined from the Pox diagram obtained by means of the rescaled range analysis of the pressure fluctuations based on the fractional Brownian motion. The local fractal dimension of pressure fluctuations has increased and thus the pressure fluctuation signals have become less persistent and irregular, with increases in the gas flow rate reaction temperature, particle size and solid content in the slurry phase. The local fractal dimension has been well correlated in terms of the operating variables.     

Lateral crushing in tightly packed arrays of thin-walled metal tubes

The plastic-collapse load and post-collapse behaviour of ductile, thin-walled tubes compressed between cylindrical indenters are analyzed for a complete range of indenter radii; experiments on steel, brass and aluminium alloy tubes show the usefulness of this analysis when deflections are large. The effect of shear force is considered; shear can develop when the sides of the tube are constrained against lateral expansion. While crushing by diametrically opposed indenters results in symmetrical modes of deformation, any shear in addition to the normally applied forces results in an asymmetrical mode of deformation which is more compliant than the symmetrical mode. The asymmetrical mode of deformation is initially unstable.     

A gain-clamped SOA with distributed Bragg reflectors fabricated under both ends of active waveguide with different lengths

We demonstrate a gain-clamped semiconductor optical amplifier (GC-SOA) which has gratings under both end regions of an active waveguide. Two gratings of the new GC-SOA are fabricated in different lengths. Their lasing modes and gain characteristics are measured and analyzed with different combinations of grating lengths. It shows different gain and noise characteristics according to the measurement direction in asymmetric grating combinations.