User-provided networks: consumer as provider

This article describes and characterizes an emerging type of user-centric wireless network model, here named a user-provided network, where the end user is at the same time a consumer and a provider of Internet access. A discussion of challenges these new models face is also provided.     

Supercritical antisolvent micronisation of synthetic all‐trans‐β‐carotene with tetrahydrofuran as solvent and carbon dioxide as antisolvent

BACKGROUND: Supercritical antisolvent (SAS) micronisation of synthetic trans ‐β‐carotene was studied using tetrahydrofuran (THF) as solvent and supercritical carbon dioxide (CO₂) as antisolvent, with the objective of increasing its bioavailability and facilitating its dispersion in oil and emulsion formulations as a result of its smaller particle size. The micronised powder was analysed by scanning electron microscopy and high‐performance liquid chromatography. Micronisation experiments were performed in order to evaluate the effects of temperature (308.15–333.15 K), pressure (6.5–13 MPa) and concentration of the liquid solution (6–9 g L^?1). The effect of the supercritical CO₂/THF flow ratio in the range between 4 and 44 (on a mass basis) was also analysed. Determinations of equilibrium concentrations of β‐carotene in the CO₂/THF mixture were also performed. RESULTS: The particle size obtained ranged from 1 to 500 µm, with mean particle diameters around 100 µm. Three types of morphology were found in the precipitated powder: crystalline with superficial pores and leaf‐like appearance; crystalline with regular shapes and blade‐like edges; and crystalline without superficial pores and leaf‐like apearance. The Peng–Robinson equation of state was used to calculate the density of the CO₂/THF binary mixture, and the solubility of β‐carotene in this mixture was correlated with its density. CONCLUSION: The use of the SAS technique to micronise β‐carotene proved to be efficient, and the absence of degradation in the micronised powder allows the industrial application of this technique. Copyright © 2008 Society of Chemical Industry     

Exopolysaccharides produced by Bifidobacterium longum IPLA E44 and Bifidobacterium animalis subsp. lactis IPLA R1 modify the composition and metabolic activity of human faecal microbiota in pH-controlled batch cultures

Exopolysaccharides (EPS) isolated from two Bifidobacterium strains, one of human intestinal origin (Bifidobacterium longum subsp. longum IPLA E44) and the other from dairy origin (Bifidobacterium animalis subsp. lactis IPLA R1), were subjected to in vitro chemically simulated gastrointestinal digestion, which showed the absence of degradation of both polymers in these conditions. Polymers were then used as carbon sources in pH-controlled faecal batch cultures and compared with the non-prebiotic carbohydrate glucose and the prebiotic inulin to determine changes in the composition of faecal bacteria. A set of eight fluorescent in situ hybridisation oligonucleotide probes targeting 16S rRNA sequences was used to quantify specific groups of microorganisms. Growth of the opportunistic pathogen Clostridium histolyticum occurred with all carbohydrates tested similarly to that found in negative control cultures without added carbohydrate and was mainly attributed to the culture conditions used rather than enhancement of growth by these substrates. Polymers E44 and R1 stimulated growth of Lactobacillus/Enterococcus, Bifidobacterium, and Bacteroides/Prevotella in a similar way to that seen with inulin. The EPS R1 also promoted growth of the Atopobium cluster during the first 24 h of fermentation. An increase in acetic and lactic acids was found during early stages of fermentation (first 10–24 h) correlating with increases of Lactobacillus, Bifidobacterium, and Atopobium. Propionic acid concentrations increased in old cultures, which was coincident with the enrichment of Clostridium cluster IX in cultures with EPS R1 and with the increases in Bacteroides in cultures with both microbial EPS (R1 and E44) and inulin. The lowest acetic to propionic acid ratio was obtained for EPS E44. None of the carbohydrates tested supported the growth of microorganisms from Clostridium clusters XIVa+b and IV, results that correlate with the poor butyrate production in the presence of EPS. Thus, EPS synthesized by bifidobacteria from dairy and intestinal origins can modulate the intestinal microbiota in vitro, promoting changes in some numerically and metabolically relevant microbial populations and shifts in the production of short chain fatty acids.     

Cost of energy and environmental policy in Portuguese CO2 abatement—scenario analysis to 2020

This paper quantifies the contribution of Portuguese energy policies for total and marginal abatement costs (MAC) for CO₂ emissions for 2020. The TIMES_PT optimisation model was used to derive MAC curves from a set of policy scenarios including one or more of the following policies: ban on nuclear power; ban on new coal power plants without carbon sequestration and storage; incentives to natural gas power plants; and a cap on biomass use. The different MAC shows the policies’ effects in the potential for CO₂ abatement. In 2020, in the most encompassing policy scenario, with all current and planned policies, is possible to abate only up to +35% of 1990 emissions at a cost below 23 € t/CO₂. In the more flexible policy scenarios, it is possible to abate up to −10% of 1990 emissions below the same cost. The total energy system costs are 10–13% higher if all policies are implemented—76 to 101 B€—roughly the equivalent to 2.01–2.65% of the 2005 GDP. Thus, from a CO₂ emission mitigation perspective, the existing policies introduce significant inefficiencies, possibly related to other policy goals. The ban on nuclear power is the instrument that has the most significant effect in MAC.     

Growth rate and medium composition strongly affect folate content in Saccharomyces cerevisiae

Folate content in a Saccharomyces cerevisiae strain was monitored during aerobic batch fermentation in synthetic growth medium, yeast peptone dextrose medium, and a molasses based medium. During growth in the synthetic medium large differences in intracellular folate content was observed at different phases. Specific folate levels, expressed per unit biomass, were highest during respiro-fermentative growth (120 microg/g) and decreased during the respiratory and stationary phases. Thus, the physiological state of the cells clearly affects the folate content. This was confirmed in chemostat cultures where total intracellular folate content increased linearly with increasing growth rate (r(2)=0.998), indicating high growth rate i.e. respiro-fermentative growth to be most favourable to obtain high specific folate content. In complex media however, much lower folate content (15-40 microg/g) was found throughout the batch growth. Only minor growth-phase related differences were detected. This shows the impact of cultivation medium on folate content in yeast. To further investigate which components that influence folate content, batch experiments in synthetic medium with addition of specific components were performed. Adding a raw mixture of peptides and amino acids (peptone) decreased folate levels extensively (90%) whereas adding amino acids one-by-one only had minor effects on the intracellular folate content. Furthermore, supplementing synthetic medium with pABA, folate or nucleotides did not change the intracellular folate content. This work constitutes the first steps towards an optimised process for production of natural folates for fortification purposes, as well as an effort to gain fundamental understanding of folate requirements in yeast in relation to environmental conditions.     

Biofortification of folates in white wheat bread by selection of yeast strain and process

We here demonstrate that folate content in yeast fermented food can be dramatically increased by using a proper (i) yeast strain and (ii) cultivation procedure for the selected strain prior to food fermentation. Folate levels were 3 to 5-fold higher in white wheat bread leavened with a Saccharomyces cerevisiae strain CBS7764, cultured in defined medium and harvested in the respiro-fermentative phase of growth prior to dough preparation (135-139 microg/100 dry matter), compared to white wheat bread leavened with commercial Baker's yeast (27-43 microg/100 g). The commercial Baker's yeast strain had been industrially produced, using a fed-batch process, thereafter compressed and stored in the refrigerator until bakings were initiated. This strategy is an attractive alternative to fortification of bread with synthetically produced folic acid. By using a high folate producing strain cultured a suitable way folate levels obtained were in accordance with folic acid content in fortified cereal products.     

Authentication of herbal drug Tukhm‐e‐balango (Lallemantia royleana Benth.) using microscopic,pharmacognostic, and phytochemical characterization

The study is aimed to provide a comprehensive account on authentication of herbal drug named as Tukhm‐e‐balango (Lallemantia royleana Benth.) from the seeds of Ocimum basilicum by using microscopic, pharmacognostic, and phytochemical characterization. The crude medicinal plants and their parts are often adulterated or substituted in market due to improper identification by the consumers while among herbal plant sellers, taxonomic confusion is caused due to morphological similarities of the plant parts and lack of a standard identification system.In microscopy, both herbarium and fresh specimens were studied using qualitative and quantitative morphological characteristics of leaves, seeds, and pollen. For pharmacognosy, solubility, fluorescence, and physicochemical characterizers were analyzed whereas a total phenolic and flavonoids contents was determined in addition to DPPH radical scavenging activity. In current study, microscopic, pharmacognostic, and phytochemical characterization clearly differentiated L. royleana from O. basilicum. The major problem in herbal drug industry is caused due to confusion and controversy of certain synonyms used for more than one or two drugs. Sometimes, under the same common or local name, entirely different taxa are being sold in herbal markets. It is concluded that correct and proper identification of medicinal plants is very crucial to ensure the safety and efficacy of herbal medicines, as many medicinal plants are intentionally or unintentionally adulterated with similar species or varieties. In herbal market, the seeds of L. royleana are adulterated with seeds of O. basilicum due to their similar morphology.     

Microscopic and phytochemical techniques as a tool for authentication of herbal drug chiraita: Swertia cordata (G. Don) C.B. Clarke

Swertia cordata (G. Don) C.B. Clarke is one of the potential medicinal plants extensively used in eastern traditional medicine such as Unani, Ayurveda, Siddha, and in traditional Tibetan and Chinese medicine. S. paniculata is the common adulterant of S. cordata at herbal shops and markets but S. paniculata is also used in number of herbal formulations. The present study was conducted to use microscopic, pharmacognostic, and phytochemical techniques as a tool for the authentication of herbal drug chiraita (S. cordata). In herbal markets, mixing, adulteration, and use of spurious materials as substitute have become a major concern for herbal practitioners, local user, and industry for reasons of safety and efficacy. Therefore, authentication of medicinal plants is of utmost importance at each level of drug research. In the present study, anatomical features of two species showed a great diversity, as irregular epidermal cells and nonglandular, unicellular trichomes were found in S. cordata while in S. paniculata epidermal cells were hexagonal in shape and trichomes were A‐shaped. Antioxidant activity of two species showed a great variation where IC₅₀ value recorded for S. cordata was 208 μg/mL, while for S. paniculata IC₅₀ was 624 μg/mL. The study can serve as an important source of information to achieve the authenticity and to evaluate the quality and purity of the plant material in accordance to WHO guidelines. As this species is greatly exploited, so conservation is highly recommended.     

Thermosiphon solar domestic water heating systems: long-term performance prediction using artificial neural networks

The objective of this work is to use artificial neural networks (ANN) for the long-term performance prediction of thermosiphonic type solar domestic water heating (SDWH) systems. Thirty SDWH systems have been tested and modelled according to the procedures outlined in the standard ISO 9459-2 at three locations in Greece. From these, data from 27 of the systems were used for training and testing the network while data from the remaining three were used for validation. Two ANNs have been trained using the monthly data produced by the modeling program supplied with the standard ISO 9459-2. Different networks were used depending on the nature of the required output, which is different in each case. The first network was trained to estimate the solar energy output of the system for a draw-off quantity equal to the storage tank capacity (at the end of the solar energy collection period) and the second one was trained to estimate the solar energy output of the system and the average quantity of hot water per month at demand temperatures of 35 and 40°C. The collector areas of the considered systems were varying between 1.81 m² and 4.38 m². Open and closed thermosiphonic systems have been considered both with horizontal and vertical storage tanks. In this way the networks were trained to accept and handle a number of unusual cases. The input data in both networks are similar to the ones used in the program supplied with the standard. These were the size and performance characteristics of each system and various climatic data. In the second network the demand temperature was also used as input. For the first network the statistical coefficient of multiple determination (R²-value) obtained for the training data set was equal to 0.9993. For the second network the R²-value for the two output parameters was equal to 0.9848 and 0.9926, respectively. Unknown data were subsequently used to investigate the accuracy of prediction and R²-values equal to 0.9913 for the first network and 0.9733 and 0.9940 for the second were obtained. These results indicate that the proposed method can successfully be used for the prediction of the solar energy output of the system for a draw-off equal to the volume of the storage tank or for the solar energy output of the system and the average quantity of the hot water per month for the two demand water temperatures considered.     

Regional energy system optimization – Potential for a regional heat market

Energy supply companies and industrial plants are likely to face new situations due to, for example, the introduction of new energy legislation, increased fuel prices and increased environmental awareness. These new prerequisites provide companies with new challenges but also new possibilities from which to benefit. Increased energy efficiency within companies and increased cooperation between different operators are two alternatives to meet the new conditions. A region characterized by a high density of energy-intensive processes is used in this study to find the economic potential of connecting three industrial plants and four energy companies, within three local district heating systems, to a regional heat market, in which different operators provide heat to a joint district heating grid. Also, different investment alternatives are studied. The results show that the economical potential for a heat market amounts to between 5 and 26 million EUR/year with payback times ranging from two to eleven years. However, the investment costs and the net benefit for the total system need to be allotted to the different operators, as they benefit economically to different extents from the introduction of a heat market. It is also shown that the emissions of CO₂ from the joint system would decrease compared to separate operation of the systems. However, the valuation of CO₂ emissions from electricity production is important as the difference of emitted CO₂ between the accounting methods exceeds 650 kton/year for some scenarios.