Evaluation of different disinfection calculation methods using CFD

Computational Fluid Dynamics combined with a particle tracking technique provides valuable information concerning residence times and contact times in chemical reactors. In drinking water treatment, for example an accurate estimation of the disinfection is important to predict the microbial safety. Ozone contactors are widely used for disinfection, but the complex geometry of the system causes suboptimal hydraulics and requires optimizations of the flow. This results in a lower ozone dosage, which may reduce the formation of unwanted disinfection-by-products and the consumption of energy. To that end disinfection needs to be calculated precisely, accounting for the complex hydraulics. Several calculation methods estimating the disinfection performance of ozone contactors were evaluated using Computational Fluid Dynamics. For an accurate disinfection prediction, the full distribution of ozone exposures (CT values) is needed, only a mean CT value or residence time distribution provides insufficient information for an accurate disinfection prediction. Adjustments to the geometry of the ozone contactor that reduce the short-circuit flows resulted in an increase in disinfection capacity, whereas the mean CT value remained the same. A sensitivity analysis with respect to the kinetics was conducted. The gain in disinfection capacity obtained by optimizing the hydraulics was significant for typical values used in practice.     

APROMORE: An advanced process model repository

Business process models are becoming available in large numbers due to their widespread use in many industrial applications such as enterprise and quality engineering projects. On the one hand, this raises a challenge as to their proper management: how can it be ensured that the proper process model is always available to the interested stakeholder? On the other hand, the richness of a large set of process models also offers opportunities, for example with respect to the re-use of existing model parts for new models. This paper describes the functionality and architecture of an advanced process model repository, named APROMORE. This tool brings together a rich set of features for the analysis, management and usage of large sets of process models, drawing from state-of-the art research in the field of process modeling. A prototype of the platform is presented in this paper, demonstrating its feasibility, as well as an outlook on the further development of APROMORE.     

Suppressing intersample behavior in iterative learning control

Iterative Learning Control (ILC) is a control strategy to improve the performance of digital batch repetitive processes. Due to its digital implementation, discrete time ILC approaches do not guarantee good intersample behavior. In fact, common discrete time ILC approaches may deteriorate the intersample behavior, thereby reducing the performance of the sampled-data system. In this paper, a generally applicable multirate ILC approach is presented that enables to balance the at-sample performance and the intersample behavior. Furthermore, key theoretical issues regarding multirate systems are addressed, including the time-varying nature of the multirate ILC setup. The proposed multirate ILC approach is shown to outperform discrete time ILC in realistic simulation examples.     

Reduction rules for YAWL workflows with cancellation regions and OR-joins

As the need for concepts such as cancellation and OR-joins occurs naturally in business scenarios, comprehensive support in a workflow language is desirable. However, there is a clear trade-off between the expressive power of a language (i.e., introducing complex constructs such as cancellation and OR-joins) and ease of verification. When a workflow contains a large number of tasks and involves complex control flow dependencies, verification can take too much time or it may even be impossible. There are a number of different approaches to deal with this complexity. Reducing the size of the workflow, while preserving its essential properties with respect to a particular analysis problem, is one such approach. In this paper, we present a set of reduction rules for workflows with cancellation regions and OR-joins and demonstrate how they can be used to improve the efficiency of verification. Our results are presented in the context of the YAWL workflow language.     

Evaluation of the effect of a paver’s trolley on productivity, task demands, workload and local discomfort

The objective of this study was to determine the differences in the number of paving stones laid (productivity), task demands, energetic workload, body region discomfort and preference when laying paving stones with or without use of a paver’s trolley (n = 8) in a within-subject controlled study of pavers. The number of paving stones laid and the task demands were measured by means of systematic observations at the workplace. The energetic workload was determined using the percentage of heart rate reserve (%HRR). Body region discomfort was measured using visual analog scales, and the workers’ preference was ascertained via interview. The use of a paver’s trolley had no effect on productivity, %HRR or body region discomfort compared to working without a paver’s trolley. The duration of knee-straining activities did not differ between working with (141 min) and without (146 min) the paver’s trolley. However, six of the eight pavers indicated that, given suitable circumstances, they wanted to use the paver’s trolley.

Relevance to industry

To reduce the chance of work-related low back and knee complaints among pavers, the duration, frequency and intensity of lower back and knee-straining activities should be limited by means of technical measures such as mechanical paving. The paver’s trolley does not appear to reduce knee-straining activities and therefore does not appear useful in reducing the risk of knee complaints and disorders.     

Computing three-dimensional two-phase flows with a mass-conserving level set method

A method is described to compute three- dimensional two-phase flow, allowing large density ratios and coalescence and break-up of bubbles. The level set method is used to describe interfaces, and the volume-of-fluid method is used to ensure mass conservation. Efficiency in computing the interface dynamics is achieved by using a functional relation between the level set and volume-of-fluid functions. Difficulties and remedies in re-initialization of the level set function and inaccurate compution of surface tension are discussed. Test cases for validation are described, and demanding two-bubble computations to show the generality and the versatility of the method are presented.     

The use of hypertext in the writing of group papers

Abstract The Virtual Constructing Tool (VCT) was developed at the Nijmegen School of Management in 1998. The VCT is intended to facilitate the process of writing group papers through the use of construction and communication tools and is based completely on the Internet. The VCT allows a paper to be structured by means of hyperlinking and cooperation between students. Students are allowed to divide tasks, but they are held responsible for the quality of the arguments in the paper as a whole. They are invited to spend time in dealing with validity claims and in building a valid train of thought. Producing a group paper includes four interrelated working processes: exploring the subject, exchanging information, arguing and discussing and editing. Hyperlinking offers a contribution in each of these processes which varies from associative linking of pieces of information to strengthening linear structuring. Therefore, a different perspective has been taken to that of those authors who consider hyperlinking as a tool par excellence for the nonlinear production of information.