Electronic Current Distribution Calculation for a Ni‐YSZ Solid Oxide Fuel Cell Anode

A simulation of a nickel‐yttrium stabilized zirconium oxide (Ni‐YSZ) solid oxide fuel cell cermet anode was used to determine the electronic current distribution within the percolating networks of nickel particles distributed in the electrode. The anode is simulated via a Monte–Carlo percolation model and current distribution is calculated via a relaxation algorithm. Nickel particle current densities are reported as a ratio to the total anode current density allowing results to be applied to any anode current density. Calculated current distributions were drastically affected by the volume percent of nickel as well as anode porosity. Experiments were performed to determine failure current densities of thin nickel wires to establish the relationship between critical current densities and surface area or volume of the wires. Both reducing and oxidizing environments were used for these measurements over a temperature range up to 800 °C.     

Long-term personal exposure to traffic-related air pollution among school children, a validation study

Several recent studies suggest an association between long-term exposure to traffic-related air pollution and health. Most studies use indicators of exposure such as outdoor air pollution or traffic density on the street of residence. Little information is available about the validity of these measurements as an estimate of long-term personal exposure to traffic-related air pollution. In this pilot study, we assessed outdoor and personal exposure to traffic-related air pollution in children living in homes on streets with different degree of traffic intensity. The personal exposure of 14 children aged 9-12 years to 'soot', NO(x) (NO and NO(2)) was assessed in Amsterdam between March and June 2003. Each child's personal exposure was monitored during four repeated 48-h periods. Concurrently, in- and outdoor NO(x) measurements were carried out at the school and at the home of each participating child. Measurements were supplemented by a questionnaire on time activity patterns and possible indoor sources. Flow-controlled battery operated pumps in a made-to-fit backpack were used to sample personal exposure to 'soot', determined from the reflectance of PM(2.5) filters. Exposure to NO(x) was assessed using Ogawa passive samplers. Children living near busy roads were found to have a 35% higher personal exposure to 'soot' than children living at an urban background location, despite that all children attended the same school that was located away from busy roads. Smaller contrasts in personal exposure were found for NO (14%), NO(2) (15%) and NO(x) (14%). This finding supports the use of 'living near a busy road' as a measure of exposure in epidemiological studies on the effects of traffic-related air pollution in children.     

Effects of unbalanced diets on cerebral glucose metabolism in the adult rat

We measured regional cerebral metabolic rates for glucose and selected cerebral metabolites in rats fed one of the following diets for 6 to 7 weeks: (1) regular laboratory chow; (2) high-fat, carbohydrate-free ketogenic diet deriving 10% of its caloric value from proteins and 90% from fat; and (3) high-carbohydrate diet deriving 10% of its caloric value from proteins, 78% from carbohydrates, and 12% from fat. In preliminary experiments, we found that moderate ketosis could not be achieved by diets deriving less than about 90% of their caloric value from fat. Rats maintained on the ketogenic diet had moderately elevated blood beta-hydroxybutyrate (O.4 mM) and acetoacetate (0.2 mM), and a five- to 10-fold increase in their cerebral beta-hydroxybutyrate level. Cerebral levels of glucose, glycogen, lactate, and citrate were similar in all groups. 2-Deoxyglucose studies showed that the ketogenic diet did not significantly alter regional brain glucose utilization. However, rats maintained on the high-carbohydrate diet had a marked decrease in their brain glucose utilization and increased cerebral concentrations of glucose 6-phosphate. These findings indicate that long-term moderate ketonemia does not significantly alter brain glucose phosphorylation. However, even marginal protein dietary deficiency, when coupled with a carbohydrate-rich diet, depresses cerebral glucose utilization to a degree often seen in metabolic encephalopathies. Our results support the clinical contention that protein dietary deficiency coupled with increased carbohydrate intake can lead to CNS dysfunction.     

Effect of Product Microstructure and Process Parameters on Modified Atmosphere Packaged Bread

The objective of this study was to examine bread microstructure, oxygen diffusion properties, and gas exchange between bread and headspace after packaging in modified atmosphere (MA). Breads were produced at laboratory scale, and industrially produced breads were included as a reference. X-ray microtomography was applied to characterize the microstructure of the bread samples. For each sample type, oxygen diffusivity was calculated based on microstructural parameters. The samples for gas analyses were packaged under MA using vacuum compensation, using two vacuum strengths during the air evacuation step. The total porosity of all laboratory samples was above 75%, except for the side and bottom crusts which had a lower porosity (<70%). The porosities of the crumb and the side crust of the commercial bread were 80 and 76%, respectively. The connectivity density of the crumbs of the laboratory and commercial breads was 8 and 10 mm^?3, respectively. The crust showed a larger resistance to oxygen diffusion than the crumb, but for both bread regions, the diffusivity was maximally ten times smaller than that of oxygen in air. When considering all data obtained from the gas analysis in the headspace immediately after packaging, oxygen levels of 0.1 ± 0.1% for strong vacuum and 3.8 ± 2.9% for weak vacuum were obtained, which differed significantly (p < 0.05). The results of the laboratory samples corresponded well to those of industrially baked breads. It was concluded that vacuum strength during packaging determines gas transport in bread after packaging.     

Neutralized electrolyzed water efficiently reduces Fusarium spp. in vitro and on wheat kernels but can trigger deoxynivalenol (DON) biosynthesis

Fusarium Head Blight (FHB), caused by a blend of Fusarium species, is a destructive fungal disease of wheat and other small grain cereals. FHB has become an important issue in food and feed industry. Moreover, the majority of FHB pathogens have the ability to synthesize a range of mycotoxins. Although several physical and chemical control measures can be taken to control these fungi in the field, research is needed to provide new techniques for control during storage and transport of cereals. Mounting evidence shows that electrolyzed oxidizing water (EOW) has antimicrobial activity and might be a useful alternative for conventional control measures. The objective of the present work, was to investigate the influence of EOW on outgrowth and germination of Fusarium spp. and deoxynivalenol (DON) production. Both an in vitro and in vivo approach were pursued. In a first approach, a screening of the main FHB causing species was conducted. Secondly, the effect of EOW on Fusarium graminearum and the effect on DON biosynthesis was investigated using a trichothecene knockout mutant. These experiments showed an increase in DON levels upon sub lethal amendments of EOW to F. graminearum spores. In addition, the reactive oxygen species H₂O₂ was shown to govern this induction.Finally, the work was validated on a laboratory scale via an in vivo assay using wheat grains in which the Fusarium outgrowth was measured. The present work demonstrates that EOW has potential to control Fusarium spp. in wheat grains during transport and storage although sub lethal concentrations can result in increased DON biosynthesis.     

Intrinsic microstructural anisotropy in tape cast ceramics by ice templating

Ice templating concepts based on tape cast processing technology are capable of creating continuous columnar-graded pore structures using a wide variety of ceramic oxides with thicknesses from 100 µm up to 1 cm for applications including fuel cells, compositional grading templates, filtration/separation membranes, and catalyst supports. The merging of the tape casting process allows for the preparation of large area flexible green tapes as well as the long-range alignment of the acicular ice crystals transverse to the cross-section, yielding an additional degree of microstructure control beyond traditional freeze cast processing. Moreover, optimization of the freeze tape casting processing parameters has proven effective in tailoring porosity in aqueous cast ceramics. Magnetic resonance microscopy (MRM) combined with scanning electron microscopy (SEM) has revealed inherent microstructural anisotropy in the morphology of pores related to the direction of the cast tape. Due to the ability of MRM to image noninvasively with volume averaging over a range of slice thicknesses, the MRM images provide complementary information to the higher resolution single plane SEM images. Morphological variance as observed at different orientations through the cross-sections of cast yttria stabilized zirconia is reported.     

Electrical and flexural anisotropy in freeze tape cast stainless steel porous substrates

Engineered metal foams have strong potential in applications such as fuel cell electrodes, sensors, variable springs, filtering media, and compositionally graded composite structures. In this study, the variation in mechanical and electrical properties was characterized in engineered porous metal foams with aligned porosity to ascertain the degree of anisotropy that can be induced in these substrates. Porous substrates were prepared by freeze tape casting of powdered ferritic stainless steel. After directional solidification of the slurry, the solvent was sublimed from ~ 1 mm thick tapes, yielding porous green metal compacts which were sintered in a protective atmosphere. The resulting disks exhibit long range ordered acicular pores with substantial anisotropy in the mechanical and electrical properties that is related to the cross sectional pore morphology and connectivity. DC conductivity testing revealed up to 61% variation depending on direction of measurement relative to the alignment of pores. Also, an 89% variation in flexural rigidity in relation to pore orientation was observed in identical disks.     

Electrochemical and gas phase parameters of cathodes for intermediate temperature solid oxide fuel cells

A series of cyclic voltammetry, chronoamperometry and electrochemical impedance experiments have been carried out in order to investigate the effect of cathode composition and porosity on the electrochemical characteristics of strontium-doped lanthanum, praseodymium and gadolinium cobaltite cathodes. The impedance responses at different electrode potentials of the half cell and symmetric single cell setups are compared and analyzed by the equivalent circuit modeling method. The deconvolution of impedance spectra for single cell cathode and anode reactions contributions based on the results of simultaneous analysis of half cells and symmetric single cells has been made by differential impedance real part vs. ac frequency plot analysis method. Noticeable influence of cathode chemical composition, meso-porosity and macro-porosity on the electrochemical activity of the oxygen electroreduction has been demonstrated. Seeming activation energy values have been calculated and discussed.