The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Virtual reality systems and research on the perception, simulation and presentation of environmental change

The ability of evolving data visualization techniques (e.g. video image-capture technology) to portray realistically both the sensuous and connotative properties of the molar environment and change within the environment has produces an abundance of environmental perception studies using various visualization technologies. Future growth in the application of these technologies to environmental change perception research requires consideration of three sets of issues: (1) the nature of the perceptual experiencing of environment; (2) simulation of thise experience; and (3) presentation of environmental displays to people engaged in the studies.     

Dissolution of copper, tin, and iron from sintered tungsten-bronze spheres in a simulated avian gizzard, and an assessment of their potential toxicity to birds

The rates of dissolution of copper, tin, and iron from sintered tungsten-bronze spheres (51.1%W, 44.4%Cu, 3.9%Sn, 0.6%Fe, by mass) were measured in an in vitro simulated avian gizzard at pH 2.0, and 42C. Most of the spheres had disintegrated completely to a fine powder by day 14. Dissolution of copper, tin, and iron from the spheres was linear over time; all r>0.974; all P<0.001. The mean rate of release of copper, tin, and iron was 30.4 mg, 2.74 mg, and 0.38 mg per g tungsten-bronze per day, respectively. These rates of metal release were compared to those in published studies to determine whether the simultaneous ingestion of eight spheres of 3.48 mm diameter would pose a toxic risk to birds. The potential absorption rates of iron and tin (0.54 mg Fe/day, and 3.89 mg Sn/day) from eight tungsten-bronze spheres of total mass 1.42 g would not prove toxic, based on empirical studies of tin and iron ingestion in waterfowl. The release of 43.17 mg copper/day from eight tungsten-bronze spheres, while exceeding the daily copper requirements of domesticated birds, is far below the levels of copper known to cause copper toxicosis in birds. We conclude that sintered tungsten-bronze material made into gunshot, fishing weights, or wheel balance weights, would not pose a toxic risk to wild birds when ingested.     

The acute effect of bunker C oil and an oil dispersant on: 1 Serum glucose, serum sodium and gill morphology in both freshwater and seawater acclimated rainbow trout (Salmo gairdneri)

Bunker C oil and an oil dispersant were tested for physiological stress on both freshwater and saltwater acclimated rainbow trout. Both compounds tended to reduce serum glucose levels with Bunker C causing the more significant decrease (P < 0.08), indicating a possible dysfunction of the kidney. The freshwater treatment group showed a significant decrease in sodium levels (P < 0.01) when treated with a dispersant, while under similar conditions, saltwater acclimated fish show a very marked increase in serum sodium concentrations (P < 0.025). Those fluctuations in sodium levels are resultant from direct interference with the energy activated sodium transport systems of the gills. Microphotographs of gill filaments and lamellae show severe damage caused by the dispersant and dispersant/oil mixture with less impairment resultant from Bunker C exposure.     

Does oyster size matter for modelling trace metal bioaccumulation?

The aim of this study was assessing whether trace metal bioaccumulation models for oysters need to account for the effect of size-structured demography. To achieve this, we used a Bayesian generalised additive mixed modelling (BGAMM) approach. This nonparametric regression approach allowed us to estimate potentially nonlinear size effects of the oysters as well as random and structured spatial effects. Native oysters were collected from ten locations around the shoreline of Moreton Bay, a subtropical estuary in southeast Queensland, Australia. The soft-tissue of these sampled oysters were weighed (dry weight basis) and then analysed for Al, Cu, Fe, Mg, Mn and Zn. Of the six trace metals analysed, only Mg was found to have a significant (negative) effect of soft-tissue mass. The correlated spatial effects for Cu, Mn and Zn indicated that the source of these trace metals in the oysters was from anthropogenic inputs while the correlated spatial effects for Al and Mg indicated natural inputs. The correlated spatial effect for Fe was characterised by 'hotspot' concentrations in regions of Moreton Bay where algal blooms have previously occurred and consequently oysters might be useful as an indicator of algal blooms in the Bay. Overall, the absence of an observed size effect for five of the six trace metals indicates that bioaccumulation models do not necessarily need to account for size-structured demography therefore enabling simpler models to be used.     

The effect of depositional history on contaminated bed sediment stability

Experiments were conducted in an annular flume using a commercially available kaolinite clay as well as contaminated bed sediment from Hamilton Harbour (Ontario) to assess their stability against erosion. Critical shear stress for erosion was measured under different conditions of bed formation (quiescently deposited beds and shear deposited beds) as well as with and without the presence of a biostabilized bed. Results suggest that a biostabilized bed and a bed formed under a flowing condition, similar to a river scenario, will be more resistant against erosion than will a non-biostabilized bed and a bed formed under quiescent conditions. Up to three cycles of erosion and flocculation/deposition were observed to occur within one experiment. These results suggest that the depositional history and biostabilization of river bed sediments need to be seriously considered within sediment and contaminant transport models if meaningful estimates of sediment and contaminant source, fate and effect are to be generated and used for the management of our aquatic ecosystems.     

Analysis of point load test as a method for preliminary geotechnical classification of rocks

This paper deals with the analysis of the point load compression test made on irregular-shaped rock fragments, proposed in the late 50’s by Protodiakonov. An ample revision of the literature on the subject has been made, and a series of tests, using seven different types of rock materials, has been developed. The results obtained from these tests showed that parameters generally used in literature to relate the unconfined compressive (or tensile) strength of materials, resulting from point load tests, can lead to scattered results, due mainly to the scale effect, of great evidence in such tests. It seems possible to obtain compressive (and tensile) strength of rocks, if the ratio between failure load and the distance between load application poins, with a 3/2 exponent, is considered, in field work, as being the "point load strength index".

---

Resume L’article présente une analyse critique de l’essai de compression sur échantillons irréguliers de roche, proposé par Protodiakonov vers la fin des années 50. Tout d’abord on a fait une révision de la littérature disponible sur le sujet et, après, une série d’essais sur sept types différents de matériaux. Les résultats obtenus ont montré que les paramètres plus utilisés, dans la littérature, pour définir la résistance à la compression (ou traction) des roches, d’après les essais ponctuels, peuvent provoquer une dispersion très importante des résultats. Cependant, il nous semble valable de suggérer la possibilité de déterminer, sur le chantier, la résistance à la compression (ou traction) des roches, si l’on considère le quotient entre la charge de rupture et la distance entre les deux points d’application de cette charge, le dénominateur à la puissance 3/2, comme "l’indice de charge ponctuelle".

     

Chemical and physical characteristics of a eutrophic reservoir and its tributaries: Long Lake, Washington

Surveillance on the Spokane River and its tributaries has shown that a major source of nutrients influencing the eutrophication of Long Lake was the effluent of the Spokane primary sewage treatment plant. Existing concentrations of nitrate nitrogen and orthophosphate increased threefold and tenfold, respectively, below the effluent. Of the influent phosphate phosphorus, 19 per cent was retained in the reservoir.A density current system was evident in Long Lake which altered vertical and longitudinal distribution of physical and chemical parameters. This current isolated a wedge of water on the reservoir bottom which became anaerobic. During the period of anaerobiosis, phosphate phosphorus and nitrogen maxima were present in the hypolimnion.     

Radon and 'King Solomon's Miners': Faynan Orefield, Jordanian Desert

Concentrations of 222Rn were measured in ancient copper mines which exploited the Faynan Orefield in the South-Western Jordanian Desert. The concentrations of radon gas detected indicate that the ancient metal workers would have been exposed to a significant health risk and indicate that any future attempt to exploit the copper ores must deal with the hazard identified. Seasonal variations in radon concentrations are noted and these are linked to the ventilation of the mines. These modern data are used to explore the differential exposure to radon and the health of ancient mining communities.