Static strength analysis of CANDU-6 reactor fuel bundle

A static analysis, finite-element (FE) model was developed to simulate out-reactor fuel–string strength tests with use of the well-known, structural analysis computer code ABAQUS. The FE model takes into account the deflection of fuel elements, and stress and displacement in endplates subjected to hydraulic drag loads. It was adapted to the strength tests performed for CANFLEX 43-element bundles and the existing 37-element bundles. The FE model was found to be in good agreement with experiment results. With use of the FE model, the static behavior of the fuel bundle string, such as load transfer between ring elements, endplate rib effects, hydraulic drag load incurring plastic deformation in fuel string and hydraulic flow rate effects were investigated.     

High-temperature corrosion characteristics of yttria-stabilized zirconia material in molten salts of LiCl-Li2O and LiCl-Li2O-Li

The isothermal and cyclic corrosion behavior of yttria (Y₂O₃)-stabilized zirconia (ZrO₂) in a LiCl-Li₂O molten salt were investigated at 650 °C in an argon atmosphere. During isothermal and cyclic corrosion tests in the molten salt of LiCl-Li₂O for 168 h and 7 thermal cycles, the corrosion rate was very low, whereas under the molten salt of LiCl-Li₂O-Li for 168 h, the corrosion rate was almost 10 times higher than that in the molten salt of LiCl-Li₂O. No corrosion product was detected until 168 h for the isothermal corrosion test, however, after 7 thermal cycles, a very-low-intensity Li₂ZrO₃ peak was detected at the beginning stage of the chemical reaction between ZrO₂ and Li₂O. Additionally, in the molten salt of LiCl-Li₂O-Li for 168 h, a large amount of Li₂ZrO₃ was formed, with evidence of marked cracks, pores, and spallations on the corroded surface. The introduction of Y₂O₃-stabilized ZrO₂ was beneficial in increasing the hot corrosion resistance of the structural materials used to handle molten salts containing Li₂O at elevated temperature without forming a lithium at the cathode during the electrolytic reduction process.     

Recycling of LiCl–KCl eutectic based salt wastes containing radioactive rare earth oxychlorides or oxides

Recycling of LiCl–KCl eutectic salt wastes containing radioactive rare earth oxychlorides or oxides was studied to recover renewable salts from the salt wastes and to minimize the radioactive wastes by using a vacuum distillation method. Vaporization of the LiCl–KCl eutectic salt was effective above 900 °C and at 5 Torr. The condensations of the vaporized salt were largely dependent on temperature gradient. Based on these results, a recycling system of the salt wastes as a closed loop type was developed to obtain a high efficiency of the salt recovery condition. In this system, it was confirmed that renewable salt was recovered at more than 99 wt.% from the salt wastes, and the changes in temperature and pressure in the system could be utilized to understand the present condition of the system operation.     

Detection and estimation of sensor drifts using Kalman filters with a demonstration on a pressurizer

An algorithm for detection and estimation of sensor drifts is proposed in this paper. The algorithm is based on estimation of the process states from which the measurements are made and the rate of drifts using a state augmented Kalman filter. The detection and the estimation of a drift are carried out by evaluating the mean of the innovation sequence of the Kalman filter. The relationship between the mean and the drift is analyzed in detail to provide insights on the connection between the innovation sequence and the drift. The developed algorithm has been successfully applied to a pressurizer for detection and estimation of pressure sensor drifts. The results convincingly demonstrate the capability of the algorithm.     

Implementation of a second-order upwind method in a semi-implicit two-phase flow code on unstructured meshes

A two-phase flow analysis code, CUPID, has been developed for a realistic simulation of thermal–hydraulic phenomena in nuclear reactor components. In the CUPID code, a two-fluid three-field model is adopted and the governing equations are solved on unstructured meshes. To obtain the numerical solution, the semi-implicit method of the RELAP5 code was used with some modifications for a cell-centered finite volume method. In this work, a second-order upwind method was implemented for the convective terms of the CUPID code. To get the slopes of the convective quantities, we adopted the Frink’s reconstruction method (1994, AIAA Paper 94-0061) and modified it for an application to arbitrary polyhedral cells. To stabilize the numerical solutions, the Barth and Jesperson’s slope limiter was used. In order to evaluate the enhanced accuracy and ensure the robustness of the implemented scheme, numerical tests were performed using conceptual single- and two-phase flow problems, which include a strong phase change and very heterogeneous phase distributions.     

Design,Implementation, and Validation of KOMPSAT‐2 Software Simulator

In this paper, we present design features, implementation, and validation of a satellite simulator subsystem for the Korea Multi‐Purpose Satellite‐2 (KOMPSAT‐2). The satellite simulator subsystem is implemented on a personal computer to minimize costs and trouble on embedding onboard flight software into the simulator. An object‐oriented design methodology is employed to maximize software reusability. Also, instead of a high‐cost commercial database, XML is used for the manipulation of spacecraft characteristics data, telecommand, telemetry, and simulation data. The KOMPSAT‐2 satellite simulator subsystem is validated by various simulations for autonomous onboard launch and early orbit phase operations, anomaly operation, and science fine mode operation. It is also officially verified by successfully passing various tests such as the satellite simulator subsystem test, mission control element system integration test, interface test, site installation test, and acceptance test.